Report install start/failure to telemetry API

Add telemetry hooks in misc/build.func: call post_to_api at installation start to capture early or immediately-failing installs, and call post_update_to_api with status "failed" and the install exit code when a container installation fails. This improves visibility into install failures for monitoring/telemetry.

CHANGELOG.md

@@ -401,74 +401,8 @@ Exercise vigilance regarding copycat or coat-tailing sites that seek to exploit
 
 </details>
 
-## 2026-02-13
-
-### 🚀 Updated Scripts
-
-  - #### 🐞 Bug Fixes
-
-    - OpenWebUI: pin numba constraint [@MickLesk](https://github.com/MickLesk) ([#11874](https://github.com/community-scripts/ProxmoxVE/pull/11874))
-    - Planka: add migrate step to update function [@ZimmermannLeon](https://github.com/ZimmermannLeon) ([#11877](https://github.com/community-scripts/ProxmoxVE/pull/11877))
-    - Pangolin: switch sqlite-specific back to generic [@MickLesk](https://github.com/MickLesk) ([#11868](https://github.com/community-scripts/ProxmoxVE/pull/11868))
-    - [Hotfix] Jotty: Copy contents of config backup into /opt/jotty/config [@vhsdream](https://github.com/vhsdream) ([#11864](https://github.com/community-scripts/ProxmoxVE/pull/11864))
-
-  - #### 🔧 Refactor
-
-    - chore(donetick): add config entry for v0.1.73 [@tomfrenzel](https://github.com/tomfrenzel) ([#11872](https://github.com/community-scripts/ProxmoxVE/pull/11872))
-    - Refactor: Radicale [@vhsdream](https://github.com/vhsdream) ([#11850](https://github.com/community-scripts/ProxmoxVE/pull/11850))
-
-### 💾 Core
-
-  - #### 🔧 Refactor
-
-    - core: retry reporting with fallback payloads [@MickLesk](https://github.com/MickLesk) ([#11885](https://github.com/community-scripts/ProxmoxVE/pull/11885))
-
-### 📡 API
-
-  - #### ✨ New Features
-
-    - error-handler: Implement json_escape and enhance error handling [@MickLesk](https://github.com/MickLesk) ([#11875](https://github.com/community-scripts/ProxmoxVE/pull/11875))
-
-### 🌐 Website
-
-  - #### 📝 Script Information
-
-    - SQLServer-2025: add PVE9/Kernel 6.x incompatibility warning [@MickLesk](https://github.com/MickLesk) ([#11829](https://github.com/community-scripts/ProxmoxVE/pull/11829))
-
 ## 2026-02-12
 
-### 🚀 Updated Scripts
-
-  - #### 🐞 Bug Fixes
-
-    - EMQX: increase disk to 6GB and add optional MQ disable prompt [@MickLesk](https://github.com/MickLesk) ([#11844](https://github.com/community-scripts/ProxmoxVE/pull/11844))
-    - Increased the Grafana container default disk size. [@shtefko](https://github.com/shtefko) ([#11840](https://github.com/community-scripts/ProxmoxVE/pull/11840))
-    - Pangolin: Update database generation command in install script [@tremor021](https://github.com/tremor021) ([#11825](https://github.com/community-scripts/ProxmoxVE/pull/11825))
-    - Deluge: add python3-setuptools as dep [@MickLesk](https://github.com/MickLesk) ([#11833](https://github.com/community-scripts/ProxmoxVE/pull/11833))
-    - Dispatcharr: migrate to uv sync [@MickLesk](https://github.com/MickLesk) ([#11831](https://github.com/community-scripts/ProxmoxVE/pull/11831))
-
-  - #### ✨ New Features
-
-    - Archlinux-VM: fix LVM/LVM-thin storage and improve error reporting | VM's add correct exit_code for analytics [@MickLesk](https://github.com/MickLesk) ([#11842](https://github.com/community-scripts/ProxmoxVE/pull/11842))
-    - Debian13-VM: Optimize First Boot & add noCloud/Cloud Selection [@MickLesk](https://github.com/MickLesk) ([#11810](https://github.com/community-scripts/ProxmoxVE/pull/11810))
-
-### 💾 Core
-
-  - #### ✨ New Features
-
-    - tools.func: auto-detect binary vs armored GPG keys in setup_deb822_repo [@MickLesk](https://github.com/MickLesk) ([#11841](https://github.com/community-scripts/ProxmoxVE/pull/11841))
-    - core: remove old Go API and extend misc/api.func with new backend [@MickLesk](https://github.com/MickLesk) ([#11822](https://github.com/community-scripts/ProxmoxVE/pull/11822))
-
-  - #### 🔧 Refactor
-
-    - error_handler: prevent stuck 'installing' status [@MickLesk](https://github.com/MickLesk) ([#11845](https://github.com/community-scripts/ProxmoxVE/pull/11845))
-
-### 🧰 Tools
-
-  - #### 🐞 Bug Fixes
-
-    - Tailscale: fix DNS check and keyrings directory issues [@MickLesk](https://github.com/MickLesk) ([#11837](https://github.com/community-scripts/ProxmoxVE/pull/11837))
-
 ## 2026-02-11
 
 ### 🆕 New Scripts

ct/alpine-grafana.sh

@@ -9,7 +9,7 @@ APP="Alpine-Grafana"
 var_tags="${var_tags:-alpine;monitoring}"
 var_cpu="${var_cpu:-1}"
 var_ram="${var_ram:-256}"
-var_disk="${var_disk:-2}"
+var_disk="${var_disk:-1}"
 var_os="${var_os:-alpine}"
 var_version="${var_version:-3.23}"
 var_unprivileged="${var_unprivileged:-1}"

ct/deluge.sh

@@ -28,7 +28,6 @@ function update_script() {
     exit
   fi
   msg_info "Updating Deluge"
-  ensure_dependencies python3-setuptools
   $STD apt update
   $STD pip3 install deluge[all] --upgrade
   msg_ok "Updated Deluge"

ct/dispatcharr.sh

@@ -104,7 +104,7 @@ function update_script() {
     cd /opt/dispatcharr
     rm -rf .venv
     $STD uv venv --clear
-    $STD uv sync
+    $STD uv pip install -r requirements.txt --index-strategy unsafe-best-match
     $STD uv pip install gunicorn gevent celery redis daphne
     msg_ok "Updated Dispatcharr Backend"
 

ct/donetick.sh

@@ -42,8 +42,7 @@ function update_script() {
 
     msg_info "Restoring Configurations"
     mv /opt/selfhosted.yaml /opt/donetick/config
-    grep -q 'http://localhost"$' /opt/donetick/config/selfhosted.yaml || sed -i '/https:\/\/localhost"$/a\    - "http://localhost"' /opt/donetick/config/selfhosted.yaml
-    grep -q 'capacitor://localhost' /opt/donetick/config/selfhosted.yaml || sed -i '/http:\/\/localhost"$/a\    - "capacitor://localhost"' /opt/donetick/config/selfhosted.yaml
+    sed -i '/capacitor:\/\/localhost/d' /opt/donetick/config/selfhosted.yaml
     mv /opt/donetick.db /opt/donetick
     msg_ok "Restored Configurations"
 

ct/emqx.sh

@@ -9,7 +9,7 @@ APP="EMQX"
 var_tags="${var_tags:-mqtt}"
 var_cpu="${var_cpu:-2}"
 var_ram="${var_ram:-1024}"
-var_disk="${var_disk:-6}"
+var_disk="${var_disk:-4}"
 var_os="${var_os:-debian}"
 var_version="${var_version:-13}"
 var_unprivileged="${var_unprivileged:-1}"

ct/grafana.sh

@@ -9,7 +9,7 @@ APP="Grafana"
 var_tags="${var_tags:-monitoring;visualization}"
 var_cpu="${var_cpu:-1}"
 var_ram="${var_ram:-512}"
-var_disk="${var_disk:-4}"
+var_disk="${var_disk:-2}"
 var_os="${var_os:-debian}"
 var_version="${var_version:-13}"
 var_unprivileged="${var_unprivileged:-1}"

ct/jotty.sh

@@ -46,7 +46,7 @@ function update_script() {
     msg_info "Restoring configuration & data"
     mv /opt/app.env /opt/jotty/.env
     [[ -d /opt/data ]] && mv /opt/data /opt/jotty/data
-    [[ -d /opt/jotty/config ]] && cp -a /opt/config/* /opt/jotty/config && rm -rf /opt/config
+    [[ -d /opt/jotty/config ]] && mv /opt/config/* /opt/jotty/config
     msg_ok "Restored configuration & data"
 
     msg_info "Starting Service"

ct/openwebui.sh

@@ -44,7 +44,7 @@ function update_script() {
 
     msg_info "Installing uv-based Open-WebUI"
     PYTHON_VERSION="3.12" setup_uv
-    $STD uv tool install --python 3.12 --constraint <(echo "numba>=0.60") open-webui[all]
+    $STD uv tool install --python 3.12 open-webui[all]
     msg_ok "Installed uv-based Open-WebUI"
 
     msg_info "Restoring data"
@@ -126,7 +126,7 @@ EOF
 
   msg_info "Updating Open WebUI via uv"
   PYTHON_VERSION="3.12" setup_uv
-  $STD uv tool install --force --python 3.12 --constraint <(echo "numba>=0.60") open-webui[all]
+  $STD uv tool upgrade --python 3.12 open-webui[all]
   systemctl restart open-webui
   msg_ok "Updated Open WebUI"
   msg_ok "Updated successfully!"

ct/pangolin.sh

@@ -51,7 +51,7 @@ function update_script() {
     $STD npm run db:generate
     $STD npm run build
     $STD npm run build:cli
-    $STD npm run db:push
+    $STD npm run db:sqlite:push
     cp -R .next/standalone ./
     chmod +x ./dist/cli.mjs
     cp server/db/names.json ./dist/names.json

ct/planka.sh

@@ -61,12 +61,6 @@ function update_script() {
     rm -rf "$BK"
     msg_ok "Restored data"
 
-    msg_ok "Migrate Database"
-    cd /opt/planka
-    $STD npm run db:upgrade
-    $STD npm run db:migrate
-    msg_ok "Migrated Database"
-
     msg_info "Starting Service"
     systemctl start planka
     msg_ok "Started Service"

ct/radicale.sh

@@ -28,55 +28,16 @@ function update_script() {
     exit
   fi
 
-  if check_for_gh_release "Radicale" "Kozea/Radicale"; then
-    msg_info "Stopping service"
-    systemctl stop radicale
-    msg_ok "Stopped service"
+  msg_info "Updating ${APP}"
+  $STD python3 -m venv /opt/radicale
+  source /opt/radicale/bin/activate
+  $STD python3 -m pip install --upgrade https://github.com/Kozea/Radicale/archive/master.tar.gz
+  msg_ok "Updated ${APP}"
 
-    msg_info "Backing up users file"
-    cp /opt/radicale/users /opt/radicale_users_backup
-    msg_ok "Backed up users file"
-
-    PYTHON_VERSION="3.13" setup_uv
-    CLEAN_INSTALL=1 fetch_and_deploy_gh_release "Radicale" "Kozea/Radicale" "tarball" "latest" "/opt/radicale"
-
-    msg_info "Restoring users file"
-    rm -f /opt/radicale/users
-    mv /opt/radicale_users_backup /opt/radicale/users
-    msg_ok "Restored users file"
-
-    if grep -q 'start.sh' /etc/systemd/system/radicale.service; then
-      sed -i -e '/^Description/i[Unit]' \
-        -e '\|^ExecStart|iWorkingDirectory=/opt/radicale' \
-        -e 's|^ExecStart=.*|ExecStart=/usr/local/bin/uv run -m radicale --config /etc/radicale/config|' /etc/systemd/system/radicale.service
-      systemctl daemon-reload
-    fi
-    if [[ ! -f /etc/radicale/config ]]; then
-      msg_info "Migrating to config file (/etc/radicale/config)"
-      mkdir -p /etc/radicale
-      cat <<EOF >/etc/radicale/config
-[server]
-hosts = 0.0.0.0:5232
-
-[auth]
-type = htpasswd
-htpasswd_filename = /opt/radicale/users
-htpasswd_encryption = sha512
-
-[storage]
-type = multifilesystem
-filesystem_folder = /var/lib/radicale/collections
-
-[web]
-type = internal
-EOF
-      msg_ok "Migrated to config (/etc/radicale/config)"
-    fi
-    msg_info "Starting service"
-    systemctl start radicale
-    msg_ok "Started service"
-    msg_ok "Updated Successfully!"
-  fi
+  msg_info "Starting Service"
+  systemctl enable -q --now radicale
+  msg_ok "Started Service"
+  msg_ok "Updated successfully!"
   exit
 }
 

frontend/public/json/emqx.json

@@ -21,7 +21,7 @@
       "resources": {
         "cpu": 2,
         "ram": 1024,
-        "hdd": 6,
+        "hdd": 4,
         "os": "debian",
         "version": "13"
       }

frontend/public/json/github-versions.json

@@ -1,5 +1,5 @@
 {
-  "generated": "2026-02-13T12:11:36Z",
+  "generated": "2026-02-12T06:25:40Z",
   "versions": [
     {
       "slug": "2fauth",
@@ -193,9 +193,9 @@
     {
       "slug": "cleanuparr",
       "repo": "Cleanuparr/Cleanuparr",
-      "version": "v2.6.1",
+      "version": "v2.5.1",
       "pinned": false,
-      "date": "2026-02-13T10:00:19Z"
+      "date": "2026-01-11T00:46:17Z"
     },
     {
       "slug": "cloudreve",
@@ -298,9 +298,9 @@
     {
       "slug": "donetick",
       "repo": "donetick/donetick",
-      "version": "v0.1.73",
+      "version": "v0.1.71",
       "pinned": false,
-      "date": "2026-02-12T23:42:30Z"
+      "date": "2026-02-11T06:01:13Z"
     },
     {
       "slug": "drawio",
@@ -403,9 +403,9 @@
     {
       "slug": "ghostfolio",
       "repo": "ghostfolio/ghostfolio",
-      "version": "2.238.0",
+      "version": "2.237.0",
       "pinned": false,
-      "date": "2026-02-12T18:28:55Z"
+      "date": "2026-02-08T13:59:53Z"
     },
     {
       "slug": "gitea",
@@ -543,9 +543,9 @@
     {
       "slug": "huntarr",
       "repo": "plexguide/Huntarr.io",
-      "version": "9.2.4.1",
+      "version": "9.2.3",
       "pinned": false,
-      "date": "2026-02-12T22:17:47Z"
+      "date": "2026-02-07T04:44:20Z"
     },
     {
       "slug": "immich-public-proxy",
@@ -571,16 +571,16 @@
     {
       "slug": "invoiceninja",
       "repo": "invoiceninja/invoiceninja",
-      "version": "v5.12.59",
+      "version": "v5.12.57",
       "pinned": false,
-      "date": "2026-02-13T02:26:13Z"
+      "date": "2026-02-11T23:08:56Z"
     },
     {
       "slug": "jackett",
       "repo": "Jackett/Jackett",
-      "version": "v0.24.1103",
+      "version": "v0.24.1098",
       "pinned": false,
-      "date": "2026-02-13T05:53:23Z"
+      "date": "2026-02-12T05:56:25Z"
     },
     {
       "slug": "jellystat",
@@ -599,9 +599,9 @@
     {
       "slug": "jotty",
       "repo": "fccview/jotty",
-      "version": "1.20.0",
+      "version": "1.19.1",
       "pinned": false,
-      "date": "2026-02-12T09:23:30Z"
+      "date": "2026-01-26T21:30:39Z"
     },
     {
       "slug": "kapowarr",
@@ -823,9 +823,9 @@
     {
       "slug": "metube",
       "repo": "alexta69/metube",
-      "version": "2026.02.12",
+      "version": "2026.02.08",
       "pinned": false,
-      "date": "2026-02-12T21:05:49Z"
+      "date": "2026-02-08T17:01:37Z"
     },
     {
       "slug": "miniflux",
@@ -998,9 +998,9 @@
     {
       "slug": "pangolin",
       "repo": "fosrl/pangolin",
-      "version": "1.15.4",
+      "version": "1.15.3",
       "pinned": false,
-      "date": "2026-02-13T00:54:02Z"
+      "date": "2026-02-12T06:10:19Z"
     },
     {
       "slug": "paperless-ai",
@@ -1026,9 +1026,9 @@
     {
       "slug": "patchmon",
       "repo": "PatchMon/PatchMon",
-      "version": "v1.4.0",
+      "version": "v1.3.7",
       "pinned": false,
-      "date": "2026-02-13T10:39:03Z"
+      "date": "2025-12-25T11:08:14Z"
     },
     {
       "slug": "paymenter",
@@ -1219,13 +1219,6 @@
       "pinned": false,
       "date": "2025-11-16T22:39:01Z"
     },
-    {
-      "slug": "radicale",
-      "repo": "Kozea/Radicale",
-      "version": "v3.6.0",
-      "pinned": false,
-      "date": "2026-01-10T06:56:46Z"
-    },
     {
       "slug": "rclone",
       "repo": "rclone/rclone",
@@ -1299,9 +1292,9 @@
     {
       "slug": "scraparr",
       "repo": "thecfu/scraparr",
-      "version": "v3.0.3",
+      "version": "v3.0.1",
       "pinned": false,
-      "date": "2026-02-12T14:20:56Z"
+      "date": "2026-02-11T17:42:23Z"
     },
     {
       "slug": "seelf",
@@ -1439,9 +1432,9 @@
     {
       "slug": "termix",
       "repo": "Termix-SSH/Termix",
-      "version": "release-1.11.1-tag",
+      "version": "release-1.11.0-tag",
       "pinned": false,
-      "date": "2026-02-13T04:49:16Z"
+      "date": "2026-01-25T02:09:52Z"
     },
     {
       "slug": "the-lounge",
@@ -1467,9 +1460,9 @@
     {
       "slug": "tianji",
       "repo": "msgbyte/tianji",
-      "version": "v1.31.12",
+      "version": "v1.31.10",
       "pinned": false,
-      "date": "2026-02-12T19:06:14Z"
+      "date": "2026-02-04T17:21:04Z"
     },
     {
       "slug": "traccar",
@@ -1558,9 +1551,9 @@
     {
       "slug": "upsnap",
       "repo": "seriousm4x/UpSnap",
-      "version": "5.2.8",
+      "version": "5.2.7",
       "pinned": false,
-      "date": "2026-02-13T00:02:37Z"
+      "date": "2026-01-07T23:48:00Z"
     },
     {
       "slug": "uptimekuma",

frontend/public/json/grafana.json

@@ -21,7 +21,7 @@
             "resources": {
                 "cpu": 1,
                 "ram": 512,
-                "hdd": 4,
+                "hdd": 2,
                 "os": "debian",
                 "version": "13"
             }
@@ -32,7 +32,7 @@
             "resources": {
                 "cpu": 1,
                 "ram": 256,
-                "hdd": 2,
+                "hdd": 1,
                 "os": "alpine",
                 "version": "3.23"
             }

frontend/public/json/radicale.json

@@ -12,7 +12,7 @@
   "documentation": "https://radicale.org/master.html#documentation-1",
   "website": "https://radicale.org/",
   "logo": "https://cdn.jsdelivr.net/gh/selfhst/icons@main/webp/radicale.webp",
-  "config_path": "/etc/radicale/config",
+  "config_path": "/etc/radicale/config or ~/.config/radicale/config",
   "description": "Radicale is a small but powerful CalDAV (calendars, to-do lists) and CardDAV (contacts)",
   "install_methods": [
     {

frontend/public/json/sqlserver2025.json

@@ -32,10 +32,6 @@
     "password": null
   },
   "notes": [
-    {
-      "text": "SQL Server (2025) SQLPAL is incompatible with Proxmox VE 9 (Kernel 6.12+) in LXC containers. Use a VM instead or the SQL-Server 2022 LXC.",
-      "type": "warning"
-    },
     {
       "text": "If you choose not to run the installation setup, execute: `/opt/mssql/bin/mssql-conf setup` in LXC shell.",
       "type": "info"

install/deluge-install.sh

@@ -16,8 +16,7 @@ update_os
 msg_info "Installing Dependencies"
 $STD apt install -y \
   python3-pip \
-  python3-libtorrent \
-  python3-setuptools
+  python3-libtorrent
 msg_ok "Installed Dependencies"
 
 msg_info "Installing Deluge"

install/dispatcharr-install.sh

@@ -37,7 +37,7 @@ fetch_and_deploy_gh_release "dispatcharr" "Dispatcharr/Dispatcharr" "tarball"
 msg_info "Installing Python Dependencies with uv"
 cd /opt/dispatcharr
 $STD uv venv --clear
-$STD uv sync
+$STD uv pip install -r requirements.txt --index-strategy unsafe-best-match
 $STD uv pip install gunicorn gevent celery redis daphne
 msg_ok "Installed Python Dependencies"
 

install/emqx-install.sh

@@ -38,18 +38,6 @@ rm -f "$DEB_FILE"
 echo "$LATEST_VERSION" >~/.emqx
 msg_ok "Installed EMQX"
 
-read -r -p "${TAB3}Would you like to disable the EMQX MQ feature? (reduces disk/CPU usage) <y/N> " prompt
-if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
-  msg_info "Disabling EMQX MQ feature"
-  mkdir -p /etc/emqx
-  if ! grep -q "^mq.enable" /etc/emqx/emqx.conf 2>/dev/null; then
-    echo "mq.enable = false" >>/etc/emqx/emqx.conf
-  else
-    sed -i 's/^mq.enable.*/mq.enable = false/' /etc/emqx/emqx.conf
-  fi
-  msg_ok "Disabled EMQX MQ feature"
-fi
-
 msg_info "Starting EMQX service"
 $STD systemctl enable -q --now emqx
 msg_ok "Enabled EMQX service"

install/openwebui-install.sh

@@ -24,7 +24,7 @@ setup_hwaccel
 PYTHON_VERSION="3.12" setup_uv
 
 msg_info "Installing Open WebUI"
-$STD uv tool install --python 3.12 --constraint <(echo "numba>=0.60") open-webui[all]
+$STD uv tool install --python 3.12 open-webui[all]
 msg_ok "Installed Open WebUI"
 
 read -r -p "${TAB3}Would you like to add Ollama? <y/N> " prompt

install/pangolin-install.sh

@@ -178,7 +178,7 @@ http:
         servers:
           - url: "http://$LOCAL_IP:3000"
 EOF
-$STD npm run db:push
+$STD npm run db:sqlite:push
 
 . /etc/os-release
 if [ "$VERSION_CODENAME" = "trixie" ]; then

install/radicale-install.sh

@@ -14,51 +14,42 @@ network_check
 update_os
 
 msg_info "Installing Dependencies"
-$STD apt install -y apache2-utils
+$STD apt install -y \
+  apache2-utils \
+  python3-pip \
+  python3-venv
 msg_ok "Installed Dependencies"
 
-PYTHON_VERSION="3.13" setup_uv
-fetch_and_deploy_gh_release "Radicale" "Kozea/Radicale" "tarball" "latest" "/opt/radicale"
-
 msg_info "Setting up Radicale"
-cd /opt/radicale
+python3 -m venv /opt/radicale
+source /opt/radicale/bin/activate
+$STD python3 -m pip install --upgrade https://github.com/Kozea/Radicale/archive/master.tar.gz
 RNDPASS=$(openssl rand -base64 18 | tr -dc 'a-zA-Z0-9' | head -c13)
-$STD htpasswd -c -b -5 /opt/radicale/users admin "$RNDPASS"
+$STD htpasswd -c -b -5 /opt/radicale/users admin $RNDPASS
 {
   echo "Radicale Credentials"
   echo "Admin User: admin"
   echo "Admin Password: $RNDPASS"
 } >>~/radicale.creds
+msg_ok "Done setting up Radicale"
 
-mkdir -p /etc/radicale
-cat <<EOF >/etc/radicale/config
-[server]
-hosts = 0.0.0.0:5232
+msg_info "Setup Service"
 
-[auth]
-type = htpasswd
-htpasswd_filename = /opt/radicale/users
-htpasswd_encryption = sha512
-
-[storage]
-type = multifilesystem
-filesystem_folder = /var/lib/radicale/collections
-
-[web]
-type = internal
+cat <<EOF >/opt/radicale/start.sh
+#!/usr/bin/env bash
+source /opt/radicale/bin/activate
+python3 -m radicale --storage-filesystem-folder=/var/lib/radicale/collections --hosts 0.0.0.0:5232 --auth-type htpasswd --auth-htpasswd-filename /opt/radicale/users --auth-htpasswd-encryption sha512
 EOF
-msg_ok "Set up Radicale"
 
-msg_info "Creating Service"
+chmod +x /opt/radicale/start.sh
+
 cat <<EOF >/etc/systemd/system/radicale.service
-[Unit]
 Description=A simple CalDAV (calendar) and CardDAV (contact) server
 After=network.target
 Requires=network.target
 
 [Service]
-WorkingDirectory=/opt/radicale
-ExecStart=/usr/local/bin/uv run -m radicale --config /etc/radicale/config
+ExecStart=/opt/radicale/start.sh
 Restart=on-failure
 # User=radicale
 # Deny other users access to the calendar data

install/unifi-install.sh

@@ -15,18 +15,16 @@ update_os
 
 msg_info "Installing Dependencies"
 $STD apt install -y apt-transport-https
-curl -fsSL "https://dl.ui.com/unifi/unifi-repo.gpg" -o "/usr/share/keyrings/unifi-repo.gpg"
-cat <<EOF | sudo tee /etc/apt/sources.list.d/100-ubnt-unifi.sources >/dev/null
-Types: deb
-URIs: https://www.ui.com/downloads/unifi/debian
-Suites: stable
-Components: ubiquiti
-Architectures: amd64
-Signed-By: /usr/share/keyrings/unifi-repo.gpg
-EOF
-$STD apt update
 msg_ok "Installed Dependencies"
 
+setup_deb822_repo \
+  "unifi" \
+  "https://dl.ui.com/unifi/unifi-repo.gpg" \
+  "https://www.ui.com/downloads/unifi/debian" \
+  "stable" \
+  "ubiquiti" \
+  "amd64"
+
 JAVA_VERSION="21" setup_java
 
 if lscpu | grep -q 'avx'; then

misc/api.func

@@ -153,7 +153,7 @@ explain_exit_code() {
   126) echo "Command invoked cannot execute (permission problem?)" ;;
   127) echo "Command not found" ;;
   128) echo "Invalid argument to exit" ;;
-  130) echo "Aborted by user (SIGINT)" ;;
+  130) echo "Terminated by Ctrl+C (SIGINT)" ;;
   134) echo "Process aborted (SIGABRT - possibly Node.js heap overflow)" ;;
   137) echo "Killed (SIGKILL / Out of memory?)" ;;
   139) echo "Segmentation fault (core dumped)" ;;
@@ -233,43 +233,6 @@ explain_exit_code() {
   esac
 }
 
-# ------------------------------------------------------------------------------
-# json_escape()
-#
-# - Escapes a string for safe JSON embedding
-# - Handles backslashes, quotes, newlines, tabs, and carriage returns
-# ------------------------------------------------------------------------------
-json_escape() {
-  local s="$1"
-  s=${s//\\/\\\\}
-  s=${s//"/\\"}
-  s=${s//$'\n'/\\n}
-  s=${s//$'\r'/}
-  s=${s//$'\t'/\\t}
-  echo "$s"
-}
-
-# ------------------------------------------------------------------------------
-# get_error_text()
-#
-# - Returns last 20 lines of the active log (INSTALL_LOG or BUILD_LOG)
-# - Falls back to empty string if no log is available
-# ------------------------------------------------------------------------------
-get_error_text() {
-  local logfile=""
-  if declare -f get_active_logfile >/dev/null 2>&1; then
-    logfile=$(get_active_logfile)
-  elif [[ -n "${INSTALL_LOG:-}" ]]; then
-    logfile="$INSTALL_LOG"
-  elif [[ -n "${BUILD_LOG:-}" ]]; then
-    logfile="$BUILD_LOG"
-  fi
-
-  if [[ -n "$logfile" && -s "$logfile" ]]; then
-    tail -n 20 "$logfile" 2>/dev/null | sed 's/\r$//'
-  fi
-}
-
 # ==============================================================================
 # SECTION 2: TELEMETRY FUNCTIONS
 # ==============================================================================
@@ -390,9 +353,6 @@ detect_ram() {
 # - Never blocks or fails script execution
 # ------------------------------------------------------------------------------
 post_to_api() {
-  # Prevent duplicate submissions (post_to_api is called from multiple places)
-  [[ "${POST_TO_API_DONE:-}" == "true" ]] && return 0
-
   # Silent fail - telemetry should never break scripts
   command -v curl &>/dev/null || {
     [[ "${DEV_MODE:-}" == "true" ]] && echo "[DEBUG] curl not found, skipping" >&2
@@ -480,8 +440,6 @@ EOF
       -H "Content-Type: application/json" \
       -d "$JSON_PAYLOAD" &>/dev/null || true
   fi
-
-  POST_TO_API_DONE=true
 }
 
 # ------------------------------------------------------------------------------
@@ -493,7 +451,6 @@ EOF
 #   * ct_type=2 (VM instead of LXC)
 #   * type="vm"
 #   * Disk size without 'G' suffix
-# - Includes hardware detection: CPU, GPU, RAM speed
 # - Only executes if DIAGNOSTICS=yes and RANDOM_UUID is set
 # - Never blocks or fails script execution
 # ------------------------------------------------------------------------------
@@ -516,27 +473,6 @@ post_to_api_vm() {
     pve_version=$(pveversion 2>/dev/null | awk -F'[/ ]' '{print $2}') || true
   fi
 
-  # Detect GPU if not already set
-  if [[ -z "${GPU_VENDOR:-}" ]]; then
-    detect_gpu
-  fi
-  local gpu_vendor="${GPU_VENDOR:-unknown}"
-  local gpu_model="${GPU_MODEL:-}"
-  local gpu_passthrough="${GPU_PASSTHROUGH:-unknown}"
-
-  # Detect CPU if not already set
-  if [[ -z "${CPU_VENDOR:-}" ]]; then
-    detect_cpu
-  fi
-  local cpu_vendor="${CPU_VENDOR:-unknown}"
-  local cpu_model="${CPU_MODEL:-}"
-
-  # Detect RAM if not already set
-  if [[ -z "${RAM_SPEED:-}" ]]; then
-    detect_ram
-  fi
-  local ram_speed="${RAM_SPEED:-}"
-
   # Remove 'G' suffix from disk size
   local DISK_SIZE_API="${DISK_SIZE%G}"
 
@@ -556,12 +492,6 @@ post_to_api_vm() {
     "os_version": "${var_version:-}",
     "pve_version": "${pve_version}",
     "method": "${METHOD:-default}",
-    "cpu_vendor": "${cpu_vendor}",
-    "cpu_model": "${cpu_model}",
-    "gpu_vendor": "${gpu_vendor}",
-    "gpu_model": "${gpu_model}",
-    "gpu_passthrough": "${gpu_passthrough}",
-    "ram_speed": "${ram_speed}",
     "repo_source": "${REPO_SOURCE}"
 }
 EOF
@@ -592,12 +522,9 @@ post_update_to_api() {
   # Silent fail - telemetry should never break scripts
   command -v curl &>/dev/null || return 0
 
-  # Support "force" mode (3rd arg) to bypass duplicate check for retries after cleanup
-  local force="${3:-}"
+  # Prevent duplicate submissions
   POST_UPDATE_DONE=${POST_UPDATE_DONE:-false}
-  if [[ "$POST_UPDATE_DONE" == "true" && "$force" != "force" ]]; then
-    return 0
-  fi
+  [[ "$POST_UPDATE_DONE" == "true" ]] && return 0
 
   [[ "${DIAGNOSTICS:-no}" == "no" ]] && return 0
   [[ -z "${RANDOM_UUID:-}" ]] && return 0
@@ -635,21 +562,13 @@ post_update_to_api() {
   esac
 
   # For failed/unknown status, resolve exit code and error description
-  local short_error=""
   if [[ "$pb_status" == "failed" ]] || [[ "$pb_status" == "unknown" ]]; then
     if [[ "$raw_exit_code" =~ ^[0-9]+$ ]]; then
       exit_code="$raw_exit_code"
     else
       exit_code=1
     fi
-    local error_text=""
-    error_text=$(get_error_text)
-    if [[ -n "$error_text" ]]; then
-      error=$(json_escape "$error_text")
-    else
-      error=$(json_escape "$(explain_exit_code "$exit_code")")
-    fi
-    short_error=$(json_escape "$(explain_exit_code "$exit_code")")
+    error=$(explain_exit_code "$exit_code")
     error_category=$(categorize_error "$exit_code")
     [[ -z "$error" ]] && error="Unknown error"
   fi
@@ -666,9 +585,8 @@ post_update_to_api() {
     pve_version=$(pveversion 2>/dev/null | awk -F'[/ ]' '{print $2}') || true
   fi
 
-  local http_code=""
-
-  # ── Attempt 1: Full payload with complete error text ──
+  # Full payload including all fields - allows record creation if initial call failed
+  # The Go service will find the record by random_id and PATCH, or create if not found
   local JSON_PAYLOAD
   JSON_PAYLOAD=$(
     cat <<EOF
@@ -700,80 +618,11 @@ post_update_to_api() {
 EOF
   )
 
-  http_code=$(curl -sS -w "%{http_code}" -m "${TELEMETRY_TIMEOUT}" -X POST "${TELEMETRY_URL}" \
-    -H "Content-Type: application/json" \
-    -d "$JSON_PAYLOAD" -o /dev/null 2>/dev/null) || http_code="000"
-
-  if [[ "$http_code" =~ ^2[0-9]{2}$ ]]; then
-    POST_UPDATE_DONE=true
-    return 0
-  fi
-
-  # ── Attempt 2: Short error text (no full log) ──
-  sleep 1
-  local RETRY_PAYLOAD
-  RETRY_PAYLOAD=$(
-    cat <<EOF
-{
-    "random_id": "${RANDOM_UUID}",
-    "type": "${TELEMETRY_TYPE:-lxc}",
-    "nsapp": "${NSAPP:-unknown}",
-    "status": "${pb_status}",
-    "ct_type": ${CT_TYPE:-1},
-    "disk_size": ${DISK_SIZE:-0},
-    "core_count": ${CORE_COUNT:-0},
-    "ram_size": ${RAM_SIZE:-0},
-    "os_type": "${var_os:-}",
-    "os_version": "${var_version:-}",
-    "pve_version": "${pve_version}",
-    "method": "${METHOD:-default}",
-    "exit_code": ${exit_code},
-    "error": "${short_error}",
-    "error_category": "${error_category}",
-    "install_duration": ${duration},
-    "cpu_vendor": "${cpu_vendor}",
-    "cpu_model": "${cpu_model}",
-    "gpu_vendor": "${gpu_vendor}",
-    "gpu_model": "${gpu_model}",
-    "gpu_passthrough": "${gpu_passthrough}",
-    "ram_speed": "${ram_speed}",
-    "repo_source": "${REPO_SOURCE}"
-}
-EOF
-  )
-
-  http_code=$(curl -sS -w "%{http_code}" -m "${TELEMETRY_TIMEOUT}" -X POST "${TELEMETRY_URL}" \
-    -H "Content-Type: application/json" \
-    -d "$RETRY_PAYLOAD" -o /dev/null 2>/dev/null) || http_code="000"
-
-  if [[ "$http_code" =~ ^2[0-9]{2}$ ]]; then
-    POST_UPDATE_DONE=true
-    return 0
-  fi
-
-  # ── Attempt 3: Minimal payload (bare minimum to set status) ──
-  sleep 2
-  local MINIMAL_PAYLOAD
-  MINIMAL_PAYLOAD=$(
-    cat <<EOF
-{
-    "random_id": "${RANDOM_UUID}",
-    "type": "${TELEMETRY_TYPE:-lxc}",
-    "nsapp": "${NSAPP:-unknown}",
-    "status": "${pb_status}",
-    "exit_code": ${exit_code},
-    "error": "${short_error}",
-    "error_category": "${error_category}",
-    "install_duration": ${duration}
-}
-EOF
-  )
-
+  # Fire-and-forget: never block, never fail
   curl -sS -w "%{http_code}" -m "${TELEMETRY_TIMEOUT}" -X POST "${TELEMETRY_URL}" \
     -H "Content-Type: application/json" \
-    -d "$MINIMAL_PAYLOAD" -o /dev/null 2>/dev/null || true
+    -d "$JSON_PAYLOAD" -o /dev/null 2>&1 || true
 
-  # Tried 3 times - mark as done regardless to prevent infinite loops
   POST_UPDATE_DONE=true
 }
 
@@ -809,9 +658,6 @@ categorize_error() {
   # Configuration errors
   203 | 204 | 205 | 206 | 207 | 208) echo "config" ;;
 
-  # Aborted by user
-  130) echo "aborted" ;;
-
   # Resource errors (OOM, etc)
   137 | 134) echo "resource" ;;
 
@@ -876,13 +722,7 @@ post_tool_to_api() {
 
   if [[ "$status" == "failed" ]]; then
     [[ ! "$exit_code" =~ ^[0-9]+$ ]] && exit_code=1
-    local error_text=""
-    error_text=$(get_error_text)
-    if [[ -n "$error_text" ]]; then
-      error=$(json_escape "$error_text")
-    else
-      error=$(json_escape "$(explain_exit_code "$exit_code")")
-    fi
+    error=$(explain_exit_code "$exit_code")
     error_category=$(categorize_error "$exit_code")
   fi
 
@@ -943,13 +783,7 @@ post_addon_to_api() {
 
   if [[ "$status" == "failed" ]]; then
     [[ ! "$exit_code" =~ ^[0-9]+$ ]] && exit_code=1
-    local error_text=""
-    error_text=$(get_error_text)
-    if [[ -n "$error_text" ]]; then
-      error=$(json_escape "$error_text")
-    else
-      error=$(json_escape "$(explain_exit_code "$exit_code")")
-    fi
+    error=$(explain_exit_code "$exit_code")
     error_category=$(categorize_error "$exit_code")
   fi
 
@@ -1042,13 +876,7 @@ post_update_to_api_extended() {
     else
       exit_code=1
     fi
-    local error_text=""
-    error_text=$(get_error_text)
-    if [[ -n "$error_text" ]]; then
-      error=$(json_escape "$error_text")
-    else
-      error=$(json_escape "$(explain_exit_code "$exit_code")")
-    fi
+    error=$(explain_exit_code "$exit_code")
     error_category=$(categorize_error "$exit_code")
     [[ -z "$error" ]] && error="Unknown error"
   fi

misc/build.func

@@ -4046,10 +4046,12 @@ EOF'
   if [[ $install_exit_code -ne 0 ]]; then
     msg_error "Installation failed in container ${CTID} (exit code: ${install_exit_code})"
 
-    # Copy install log from container BEFORE API call so get_error_text() can read it
+    # Report failure to telemetry API
+    post_update_to_api "failed" "$install_exit_code"
+  
+    # Copy both logs from container before potential deletion
     local build_log_copied=false
     local install_log_copied=false
-    local host_install_log="/tmp/install-lxc-${CTID}-${SESSION_ID}.log"
 
     if [[ -n "$CTID" && -n "${SESSION_ID:-}" ]]; then
       # Copy BUILD_LOG (creation log) if it exists
@@ -4057,22 +4059,15 @@ EOF'
         cp "${BUILD_LOG}" "/tmp/create-lxc-${CTID}-${SESSION_ID}.log" 2>/dev/null && build_log_copied=true
       fi
 
-      # Copy INSTALL_LOG from container to host
-      if pct pull "$CTID" "/root/.install-${SESSION_ID}.log" "$host_install_log" 2>/dev/null; then
+      # Copy INSTALL_LOG from container
+      if pct pull "$CTID" "/root/.install-${SESSION_ID}.log" "/tmp/install-lxc-${CTID}-${SESSION_ID}.log" 2>/dev/null; then
         install_log_copied=true
-        # Point INSTALL_LOG to host copy so get_error_text() finds it
-        INSTALL_LOG="$host_install_log"
       fi
-    fi
 
-    # Report failure to telemetry API (now with log available on host)
-    post_update_to_api "failed" "$install_exit_code"
-
-    # Show available logs
-    if [[ -n "$CTID" && -n "${SESSION_ID:-}" ]]; then
+      # Show available logs
       echo ""
       [[ "$build_log_copied" == true ]] && echo -e "${GN}✔${CL} Container creation log: ${BL}/tmp/create-lxc-${CTID}-${SESSION_ID}.log${CL}"
-      [[ "$install_log_copied" == true ]] && echo -e "${GN}✔${CL} Installation log: ${BL}${host_install_log}${CL}"
+      [[ "$install_log_copied" == true ]] && echo -e "${GN}✔${CL} Installation log: ${BL}/tmp/install-lxc-${CTID}-${SESSION_ID}.log${CL}"
     fi
 
     # Dev mode: Keep container or open breakpoint shell
@@ -4130,10 +4125,6 @@ EOF'
       echo -e "${BFR}${CM}${GN}Container ${CTID} removed${CL}"
     fi
 
-    # Force one final status update attempt after cleanup
-    # This ensures status is updated even if the first attempt failed (e.g., HTTP 400)
-    post_update_to_api "failed" "$install_exit_code" "force"
-
     exit $install_exit_code
   fi
 }

misc/error_handler.func

@@ -222,12 +222,6 @@ error_handler() {
           pct destroy "$CTID" &>/dev/null || true
           echo -e "${GN}✔${CL} Container ${CTID} removed"
         fi
-
-        # Force one final status update attempt after cleanup
-        # This ensures status is updated even if the first attempt failed (e.g., HTTP 400)
-        if declare -f post_update_to_api &>/dev/null; then
-          post_update_to_api "failed" "$exit_code" "force"
-        fi
       fi
     fi
   fi
@@ -249,18 +243,6 @@ error_handler() {
 # ------------------------------------------------------------------------------
 on_exit() {
   local exit_code=$?
-  # Report orphaned "installing" records to telemetry API
-  # Catches ALL exit paths: errors (non-zero), signals, AND clean exits where
-  # post_to_api was called ("installing" sent) but post_update_to_api was never called
-  if [[ "${POST_TO_API_DONE:-}" == "true" && "${POST_UPDATE_DONE:-}" != "true" ]]; then
-    if declare -f post_update_to_api >/dev/null 2>&1; then
-      if [[ $exit_code -ne 0 ]]; then
-        post_update_to_api "failed" "$exit_code"
-      else
-        post_update_to_api "failed" "1"
-      fi
-    fi
-  fi
   [[ -n "${lockfile:-}" && -e "$lockfile" ]] && rm -f "$lockfile"
   exit "$exit_code"
 }
@@ -273,10 +255,6 @@ on_exit() {
 # - Exits with code 130 (128 + SIGINT=2)
 # ------------------------------------------------------------------------------
 on_interrupt() {
-  # Report interruption to telemetry API (prevents stuck "installing" records)
-  if declare -f post_update_to_api >/dev/null 2>&1; then
-    post_update_to_api "failed" "130"
-  fi
   if declare -f msg_error >/dev/null 2>&1; then
     msg_error "Interrupted by user (SIGINT)"
   else
@@ -294,10 +272,6 @@ on_interrupt() {
 # - Triggered by external process termination
 # ------------------------------------------------------------------------------
 on_terminate() {
-  # Report termination to telemetry API (prevents stuck "installing" records)
-  if declare -f post_update_to_api >/dev/null 2>&1; then
-    post_update_to_api "failed" "143"
-  fi
   if declare -f msg_error >/dev/null 2>&1; then
     msg_error "Terminated by signal (SIGTERM)"
   else

misc/tools.func

@@ -465,7 +465,6 @@ manage_tool_repository() {
       msg_error "Failed to download MongoDB GPG key"
       return 1
     fi
-    chmod 644 "/etc/apt/keyrings/mongodb-server-${version}.gpg"
 
     # Setup repository
     local distro_codename
@@ -1295,33 +1294,12 @@ setup_deb822_repo() {
     return 1
   }
 
-  # Import GPG key (auto-detect binary vs ASCII-armored format)
-  local tmp_gpg
-  tmp_gpg=$(mktemp) || return 1
-  curl -fsSL "$gpg_url" -o "$tmp_gpg" || {
-    msg_error "Failed to download GPG key for ${name}"
-    rm -f "$tmp_gpg"
+  # Import GPG
+  curl -fsSL "$gpg_url" | gpg --dearmor --yes -o "/etc/apt/keyrings/${name}.gpg" || {
+    msg_error "Failed to import GPG key for ${name}"
     return 1
   }
 
-  if grep -q "BEGIN PGP" "$tmp_gpg" 2>/dev/null; then
-    # ASCII-armored — dearmor to binary
-    gpg --dearmor --yes -o "/etc/apt/keyrings/${name}.gpg" < "$tmp_gpg" || {
-      msg_error "Failed to dearmor GPG key for ${name}"
-      rm -f "$tmp_gpg"
-      return 1
-    }
-  else
-    # Already in binary GPG format — copy directly
-    cp "$tmp_gpg" "/etc/apt/keyrings/${name}.gpg" || {
-      msg_error "Failed to install GPG key for ${name}"
-      rm -f "$tmp_gpg"
-      return 1
-    }
-  fi
-  rm -f "$tmp_gpg"
-  chmod 644 "/etc/apt/keyrings/${name}.gpg"
-
   # Write deb822
   {
     echo "Types: deb"

tools/addon/add-tailscale-lxc.sh

@@ -75,37 +75,14 @@ pct exec "$CTID" -- bash -c '
 set -e
 export DEBIAN_FRONTEND=noninteractive
 
-# Source os-release properly (handles quoted values)
-source /etc/os-release
+ID=$(grep "^ID=" /etc/os-release | cut -d"=" -f2)
+VER=$(grep "^VERSION_CODENAME=" /etc/os-release | cut -d"=" -f2)
 
-# Fallback if DNS is poisoned or blocked
+# fallback if DNS is poisoned or blocked
 ORIG_RESOLV="/etc/resolv.conf"
 BACKUP_RESOLV="/tmp/resolv.conf.backup"
 
-# Check DNS resolution using multiple methods (dig may not be installed)
-dns_check_failed=true
-if command -v dig &>/dev/null; then
-  if dig +short pkgs.tailscale.com 2>/dev/null | grep -qvE "^127\.|^0\.0\.0\.0$|^$"; then
-    dns_check_failed=false
-  fi
-elif command -v host &>/dev/null; then
-  if host pkgs.tailscale.com 2>/dev/null | grep -q "has address"; then
-    dns_check_failed=false
-  fi
-elif command -v nslookup &>/dev/null; then
-  if nslookup pkgs.tailscale.com 2>/dev/null | grep -q "Address:"; then
-    dns_check_failed=false
-  fi
-elif command -v getent &>/dev/null; then
-  if getent hosts pkgs.tailscale.com &>/dev/null; then
-    dns_check_failed=false
-  fi
-else
-  # No DNS tools available, try curl directly and assume DNS works
-  dns_check_failed=false
-fi
-
-if $dns_check_failed; then
+if ! dig +short pkgs.tailscale.com | grep -qvE "^127\.|^0\.0\.0\.0$"; then
   echo "[INFO] DNS resolution for pkgs.tailscale.com failed (blocked or redirected)."
   echo "[INFO] Temporarily overriding /etc/resolv.conf with Cloudflare DNS (1.1.1.1)"
   cp "$ORIG_RESOLV" "$BACKUP_RESOLV"
@@ -115,22 +92,17 @@ fi
 if ! command -v curl &>/dev/null; then
   echo "[INFO] curl not found, installing..."
   apt-get update -qq
- apt update -qq
- apt install -y curl >/dev/null
+  apt-get install -y curl >/dev/null
 fi
 
-# Ensure keyrings directory exists
-mkdir -p /usr/share/keyrings
-
-curl -fsSL "https://pkgs.tailscale.com/stable/${ID}/${VERSION_CODENAME}.noarmor.gpg" \
+curl -fsSL https://pkgs.tailscale.com/stable/${ID}/${VER}.noarmor.gpg \
   | tee /usr/share/keyrings/tailscale-archive-keyring.gpg >/dev/null
 
-echo "deb [signed-by=/usr/share/keyrings/tailscale-archive-keyring.gpg] https://pkgs.tailscale.com/stable/${ID} ${VERSION_CODENAME} main" \
+echo "deb [signed-by=/usr/share/keyrings/tailscale-archive-keyring.gpg] https://pkgs.tailscale.com/stable/${ID} ${VER} main" \
   >/etc/apt/sources.list.d/tailscale.list
 
 apt-get update -qq
-apt update -qq
-apt install -y tailscale >/dev/null
+apt-get install -y tailscale >/dev/null
 
 if [[ -f /tmp/resolv.conf.backup ]]; then
   echo "[INFO] Restoring original /etc/resolv.conf"

vm/archlinux-vm.sh

@@ -70,7 +70,7 @@ function error_handler() {
   local line_number="$1"
   local command="$2"
   local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}"
-  post_update_to_api "failed" "${exit_code}"
+  post_update_to_api "failed" "${command}"
   echo -e "\n$error_message\n"
   cleanup_vmid
 }
@@ -203,6 +203,7 @@ function exit-script() {
 
 function default_settings() {
   VMID=$(get_valid_nextid)
+  FORMAT=",efitype=4m"
   MACHINE=""
   DISK_SIZE="4G"
   DISK_CACHE=""
@@ -258,9 +259,11 @@ function advanced_settings() {
     3>&1 1>&2 2>&3); then
     if [ "$MACH" = q35 ]; then
       echo -e "${CONTAINERTYPE}${BOLD}${DGN}Machine Type: ${BGN}$MACH${CL}"
+      FORMAT=""
       MACHINE=" -machine q35"
     else
       echo -e "${CONTAINERTYPE}${BOLD}${DGN}Machine Type: ${BGN}$MACH${CL}"
+      FORMAT=",efitype=4m"
       MACHINE=""
     fi
   else
@@ -473,45 +476,31 @@ case $STORAGE_TYPE in
 nfs | dir | cifs)
   DISK_EXT=".qcow2"
   DISK_REF="$VMID/"
-  DISK_IMPORT="--format qcow2"
+  DISK_IMPORT="-format qcow2"
   THIN=""
   ;;
 btrfs)
   DISK_EXT=".raw"
   DISK_REF="$VMID/"
-  DISK_IMPORT="--format raw"
+  DISK_IMPORT="-format raw"
+  FORMAT=",efitype=4m"
   THIN=""
   ;;
-*)
-  DISK_EXT=""
-  DISK_REF=""
-  DISK_IMPORT="--format raw"
-  ;;
 esac
+for i in {0,1}; do
+  disk="DISK$i"
+  eval DISK"${i}"=vm-"${VMID}"-disk-"${i}"${DISK_EXT:-}
+  eval DISK"${i}"_REF="${STORAGE}":"${DISK_REF:-}"${!disk}
+done
 
 msg_info "Creating a Arch Linux VM"
 qm create $VMID -agent 1${MACHINE} -tablet 0 -localtime 1 -bios ovmf${CPU_TYPE} -cores $CORE_COUNT -memory $RAM_SIZE \
   -name $HN -tags community-script -net0 virtio,bridge=$BRG,macaddr=$MAC$VLAN$MTU -onboot 1 -ostype l26 -scsihw virtio-scsi-pci
-
-if qm disk import --help >/dev/null 2>&1; then
-  IMPORT_CMD=(qm disk import)
-else
-  IMPORT_CMD=(qm importdisk)
-fi
-
-IMPORT_OUT="$("${IMPORT_CMD[@]}" "$VMID" "${FILE}" "$STORAGE" ${DISK_IMPORT:-} 2>&1 || true)"
-DISK_REF_IMPORTED="$(printf '%s\n' "$IMPORT_OUT" | sed -n "s/.*successfully imported disk '\([^']\+\)'.*/\1/p" | tr -d "\r\"'")"
-[[ -z "$DISK_REF_IMPORTED" ]] && DISK_REF_IMPORTED="$(pvesm list "$STORAGE" | awk -v id="$VMID" '$5 ~ ("vm-"id"-disk-") {print $1":"$5}' | sort | tail -n1)"
-[[ -z "$DISK_REF_IMPORTED" ]] && {
-  msg_error "Unable to determine imported disk reference."
-  echo "$IMPORT_OUT"
-  exit 1
-}
-msg_ok "Imported disk (${CL}${BL}${DISK_REF_IMPORTED}${CL})"
-
+pvesm alloc $STORAGE $VMID $DISK0 4M 1>&/dev/null
+qm importdisk $VMID ${FILE} $STORAGE ${DISK_IMPORT:-} 1>&/dev/null
 qm set $VMID \
-  -efidisk0 ${STORAGE}:0,efitype=4m \
-  -scsi0 ${DISK_REF_IMPORTED},${DISK_CACHE}${THIN%,} \
+  -efidisk0 ${DISK0_REF}${FORMAT} \
+  -scsi0 ${DISK1_REF},${DISK_CACHE}${THIN}size=${DISK_SIZE} \
   -ide2 ${STORAGE}:cloudinit \
   -boot order=scsi0 \
   -serial0 socket >/dev/null

vm/debian-13-vm.sh

@@ -70,7 +70,7 @@ function error_handler() {
   local line_number="$1"
   local command="$2"
   local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}"
-  post_update_to_api "failed" "${exit_code}"
+  post_update_to_api "failed" "${command}"
   echo -e "\n$error_message\n"
   cleanup_vmid
 }
@@ -201,17 +201,6 @@ function exit-script() {
   exit
 }
 
-function select_cloud_init() {
-  if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "CLOUD-INIT" \
-    --yesno "Enable Cloud-Init for VM configuration?\n\nCloud-Init allows automatic configuration of:\n- User accounts and passwords\n- SSH keys\n- Network settings (DHCP/Static)\n- DNS configuration\n\nYou can also configure these settings later in Proxmox UI.\n\nNote: Without Cloud-Init, the nocloud image will be used with console auto-login." --defaultno 18 68); then
-    CLOUD_INIT="yes"
-    echo -e "${CLOUD}${BOLD}${DGN}Cloud-Init: ${BGN}yes${CL}"
-  else
-    CLOUD_INIT="no"
-    echo -e "${CLOUD}${BOLD}${DGN}Cloud-Init: ${BGN}no${CL}"
-  fi
-}
-
 function default_settings() {
   VMID=$(get_valid_nextid)
   FORMAT=",efitype=4m"
@@ -227,6 +216,7 @@ function default_settings() {
   VLAN=""
   MTU=""
   START_VM="yes"
+  CLOUD_INIT="no"
   METHOD="default"
   echo -e "${CONTAINERID}${BOLD}${DGN}Virtual Machine ID: ${BGN}${VMID}${CL}"
   echo -e "${CONTAINERTYPE}${BOLD}${DGN}Machine Type: ${BGN}i440fx${CL}"
@@ -240,7 +230,7 @@ function default_settings() {
   echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}${MAC}${CL}"
   echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}Default${CL}"
   echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}Default${CL}"
-  select_cloud_init
+  echo -e "${CLOUD}${BOLD}${DGN}Configure Cloud-init: ${BGN}no${CL}"
   echo -e "${GATEWAY}${BOLD}${DGN}Start VM when completed: ${BGN}yes${CL}"
   echo -e "${CREATING}${BOLD}${DGN}Creating a Debian 13 VM using the above default settings${CL}"
 }
@@ -410,7 +400,13 @@ function advanced_settings() {
     exit-script
   fi
 
-  select_cloud_init
+  if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "CLOUD-INIT" --yesno "Configure the VM with Cloud-init?" --defaultno 10 58); then
+    echo -e "${CLOUD}${BOLD}${DGN}Configure Cloud-init: ${BGN}yes${CL}"
+    CLOUD_INIT="yes"
+  else
+    echo -e "${CLOUD}${BOLD}${DGN}Configure Cloud-init: ${BGN}no${CL}"
+    CLOUD_INIT="no"
+  fi
 
   if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "START VIRTUAL MACHINE" --yesno "Start VM when completed?" 10 58); then
     echo -e "${GATEWAY}${BOLD}${DGN}Start VM when completed: ${BGN}yes${CL}"
@@ -477,17 +473,6 @@ else
 fi
 msg_ok "Using ${CL}${BL}$STORAGE${CL} ${GN}for Storage Location."
 msg_ok "Virtual Machine ID is ${CL}${BL}$VMID${CL}."
-
-# ==============================================================================
-# PREREQUISITES
-# ==============================================================================
-if ! command -v virt-customize &>/dev/null; then
-  msg_info "Installing libguestfs-tools"
-  apt-get update >/dev/null 2>&1
-  apt-get install -y libguestfs-tools >/dev/null 2>&1
-  msg_ok "Installed libguestfs-tools"
-fi
-
 msg_info "Retrieving the URL for the Debian 13 Qcow2 Disk Image"
 if [ "$CLOUD_INIT" == "yes" ]; then
   URL=https://cloud.debian.org/images/cloud/trixie/latest/debian-13-genericcloud-amd64.qcow2
@@ -501,50 +486,6 @@ echo -en "\e[1A\e[0K"
 FILE=$(basename $URL)
 msg_ok "Downloaded ${CL}${BL}${FILE}${CL}"
 
-# ==============================================================================
-# IMAGE CUSTOMIZATION
-# ==============================================================================
-msg_info "Customizing ${FILE} image"
-
-WORK_FILE=$(mktemp --suffix=.qcow2)
-cp "$FILE" "$WORK_FILE"
-
-# Set hostname
-virt-customize -q -a "$WORK_FILE" --hostname "${HN}" >/dev/null 2>&1
-
-# Prepare for unique machine-id on first boot
-virt-customize -q -a "$WORK_FILE" --run-command "truncate -s 0 /etc/machine-id" >/dev/null 2>&1
-virt-customize -q -a "$WORK_FILE" --run-command "rm -f /var/lib/dbus/machine-id" >/dev/null 2>&1
-
-# Disable systemd-firstboot to prevent interactive prompts blocking the console
-virt-customize -q -a "$WORK_FILE" --run-command "systemctl disable systemd-firstboot.service 2>/dev/null; rm -f /etc/systemd/system/sysinit.target.wants/systemd-firstboot.service; ln -sf /dev/null /etc/systemd/system/systemd-firstboot.service" >/dev/null 2>&1 || true
-
-# Pre-seed firstboot settings so it won't prompt even if triggered
-virt-customize -q -a "$WORK_FILE" --run-command "echo 'Etc/UTC' > /etc/timezone && ln -sf /usr/share/zoneinfo/Etc/UTC /etc/localtime" >/dev/null 2>&1 || true
-virt-customize -q -a "$WORK_FILE" --run-command "touch /etc/locale.conf" >/dev/null 2>&1 || true
-
-if [ "$CLOUD_INIT" == "yes" ]; then
-  # Cloud-Init handles SSH and login
-  virt-customize -q -a "$WORK_FILE" --run-command "sed -i 's/^#*PermitRootLogin.*/PermitRootLogin yes/' /etc/ssh/sshd_config" >/dev/null 2>&1 || true
-  virt-customize -q -a "$WORK_FILE" --run-command "sed -i 's/^#*PasswordAuthentication.*/PasswordAuthentication yes/' /etc/ssh/sshd_config" >/dev/null 2>&1 || true
-else
-  # Configure auto-login on serial console (ttyS0) and virtual console (tty1)
-  virt-customize -q -a "$WORK_FILE" --run-command "mkdir -p /etc/systemd/system/serial-getty@ttyS0.service.d" >/dev/null 2>&1 || true
-  virt-customize -q -a "$WORK_FILE" --run-command 'cat > /etc/systemd/system/serial-getty@ttyS0.service.d/autologin.conf << EOF
-[Service]
-ExecStart=
-ExecStart=-/sbin/agetty --autologin root --noclear %I \$TERM
-EOF' >/dev/null 2>&1 || true
-  virt-customize -q -a "$WORK_FILE" --run-command "mkdir -p /etc/systemd/system/getty@tty1.service.d" >/dev/null 2>&1 || true
-  virt-customize -q -a "$WORK_FILE" --run-command 'cat > /etc/systemd/system/getty@tty1.service.d/autologin.conf << EOF
-[Service]
-ExecStart=
-ExecStart=-/sbin/agetty --autologin root --noclear %I \$TERM
-EOF' >/dev/null 2>&1 || true
-fi
-
-msg_ok "Customized image"
-
 STORAGE_TYPE=$(pvesm status -storage "$STORAGE" | awk 'NR>1 {print $2}')
 case $STORAGE_TYPE in
 nfs | dir)
@@ -560,11 +501,6 @@ btrfs)
   FORMAT=",efitype=4m"
   THIN=""
   ;;
-*)
-  DISK_EXT=""
-  DISK_REF=""
-  DISK_IMPORT="-format raw"
-  ;;
 esac
 for i in {0,1}; do
   disk="DISK$i"
@@ -576,7 +512,7 @@ msg_info "Creating a Debian 13 VM"
 qm create $VMID -agent 1${MACHINE} -tablet 0 -localtime 1 -bios ovmf${CPU_TYPE} -cores $CORE_COUNT -memory $RAM_SIZE \
   -name $HN -tags community-script -net0 virtio,bridge=$BRG,macaddr=$MAC$VLAN$MTU -onboot 1 -ostype l26 -scsihw virtio-scsi-pci
 pvesm alloc $STORAGE $VMID $DISK0 4M 1>&/dev/null
-qm importdisk $VMID ${WORK_FILE} $STORAGE ${DISK_IMPORT:-} 1>&/dev/null
+qm importdisk $VMID ${FILE} $STORAGE ${DISK_IMPORT:-} 1>&/dev/null
 if [ "$CLOUD_INIT" == "yes" ]; then
   qm set $VMID \
     -efidisk0 ${DISK0_REF}${FORMAT} \
@@ -591,10 +527,6 @@ else
     -boot order=scsi0 \
     -serial0 socket >/dev/null
 fi
-
-# Clean up work file
-rm -f "$WORK_FILE"
-
 DESCRIPTION=$(
   cat <<EOF
 <div align='center'>

vm/debian-vm.sh

@@ -70,7 +70,7 @@ function error_handler() {
   local line_number="$1"
   local command="$2"
   local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}"
-  post_update_to_api "failed" "${exit_code}"
+  post_update_to_api "failed" "${command}"
   echo -e "\n$error_message\n"
   cleanup_vmid
 }
@@ -501,11 +501,6 @@ btrfs)
   FORMAT=",efitype=4m"
   THIN=""
   ;;
-*)
-  DISK_EXT=""
-  DISK_REF=""
-  DISK_IMPORT="-format raw"
-  ;;
 esac
 for i in {0,1}; do
   disk="DISK$i"

vm/docker-vm.sh

@@ -45,7 +45,7 @@ function error_handler() {
   local line_number="$1"
   local command="$2"
   local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}"
-  post_update_to_api "failed" "${exit_code}"
+  post_update_to_api "failed" "${command}"
   echo -e "\n$error_message\n"
   cleanup_vmid
 }

vm/haos-vm.sh

@@ -74,7 +74,7 @@ function error_handler() {
   local line_number="$1"
   local command="$2"
   local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}"
-  post_update_to_api "failed" "${exit_code}"
+  post_update_to_api "failed" "${command}"
   echo -e "\n$error_message\n"
   cleanup_vmid
 }

vm/mikrotik-routeros.sh

@@ -71,7 +71,7 @@ function error_handler() {
   local line_number="$1"
   local command="$2"
   local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}"
-  post_update_to_api "failed" "${exit_code}"
+  post_update_to_api "failed" "${command}"
   echo -e "\n$error_message\n"
   cleanup_vmid
 }
@@ -566,11 +566,6 @@ zfspool)
   DISK_REF=""
   DISK_IMPORT="-format raw"
   ;;
-*)
-  DISK_EXT=""
-  DISK_REF=""
-  DISK_IMPORT="-format raw"
-  ;;
 esac
 
 DISK_VAR="vm-${VMID}-disk-0${DISK_EXT:-}"

vm/nextcloud-vm.sh

@@ -70,7 +70,7 @@ function error_handler() {
   local line_number="$1"
   local command="$2"
   local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}"
-  post_update_to_api "failed" "${exit_code}"
+  post_update_to_api "failed" "${command}"
   echo -e "\n$error_message\n"
   cleanup_vmid
 }
@@ -487,11 +487,6 @@ btrfs)
   FORMAT=",efitype=4m"
   THIN=""
   ;;
-*)
-  DISK_EXT=""
-  DISK_REF=""
-  DISK_IMPORT="-format raw"
-  ;;
 esac
 for i in {0,1,2}; do
   disk="DISK$i"

vm/openwrt-vm.sh

@@ -74,7 +74,7 @@ function error_handler() {
   local exit_code="$?"
   local line_number="$1"
   local command="$2"
-  post_update_to_api "failed" "$exit_code"
+  post_update_to_api "failed" "$command"
   local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}"
   echo -e "\n$error_message\n"
   cleanup_vmid

vm/opnsense-vm.sh

@@ -48,7 +48,7 @@ function error_handler() {
   local exit_code="$?"
   local line_number="$1"
   local command="$2"
-  post_update_to_api "failed" "$exit_code"
+  post_update_to_api "failed" "$command"
   local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}"
   echo -e "\n$error_message\n"
   cleanup_vmid
@@ -619,11 +619,6 @@ btrfs)
   FORMAT=",efitype=4m"
   THIN=""
   ;;
-*)
-  DISK_EXT=""
-  DISK_REF=""
-  DISK_IMPORT="-format raw"
-  ;;
 esac
 for i in {0,1}; do
   disk="DISK$i"

vm/owncloud-vm.sh

@@ -71,7 +71,7 @@ function error_handler() {
   local line_number="$1"
   local command="$2"
   local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}"
-  post_update_to_api "failed" "${exit_code}"
+  post_update_to_api "failed" "${command}"
   echo -e "\n$error_message\n"
   cleanup_vmid
 }
@@ -500,11 +500,6 @@ btrfs)
   FORMAT=",efitype=4m"
   THIN=""
   ;;
-*)
-  DISK_EXT=""
-  DISK_REF=""
-  DISK_IMPORT="-format raw"
-  ;;
 esac
 for i in {0,1,2}; do
   disk="DISK$i"

vm/pimox-haos-vm.sh

@@ -79,7 +79,7 @@ function error_handler() {
   local line_number="$1"
   local command="$2"
   local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}"
-  post_update_to_api "failed" "${exit_code}"
+  post_update_to_api "failed" "${command}"
   echo -e "\n$error_message\n"
   cleanup_vmid
 }
@@ -402,11 +402,6 @@ nfs | dir)
   DISK_REF="$VMID/"
   DISK_IMPORT="-format qcow2"
   ;;
-*)
-  DISK_EXT=""
-  DISK_REF=""
-  DISK_IMPORT="-format raw"
-  ;;
 esac
 for i in {0,1}; do
   disk="DISK$i"

vm/ubuntu2204-vm.sh

@@ -66,7 +66,7 @@ function error_handler() {
   local exit_code="$?"
   local line_number="$1"
   local command="$2"
-  post_update_to_api "failed" "$exit_code"
+  post_update_to_api "failed" "$command"
   local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}"
   echo -e "\n$error_message\n"
   cleanup_vmid
@@ -482,11 +482,6 @@ btrfs)
   FORMAT=",efitype=4m"
   THIN=""
   ;;
-*)
-  DISK_EXT=""
-  DISK_REF=""
-  DISK_IMPORT="-format raw"
-  ;;
 esac
 for i in {0,1}; do
   disk="DISK$i"

vm/ubuntu2404-vm.sh

@@ -69,7 +69,7 @@ function error_handler() {
   local exit_code="$?"
   local line_number="$1"
   local command="$2"
-  post_update_to_api "failed" "$exit_code"
+  post_update_to_api "failed" "$command"
   local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}"
   echo -e "\n$error_message\n"
   cleanup_vmid
@@ -484,11 +484,6 @@ btrfs)
   FORMAT=",efitype=4m"
   THIN=""
   ;;
-*)
-  DISK_EXT=""
-  DISK_REF=""
-  DISK_IMPORT="-format raw"
-  ;;
 esac
 for i in {0,1}; do
   disk="DISK$i"

vm/ubuntu2504-vm.sh

@@ -68,7 +68,7 @@ function error_handler() {
   local exit_code="$?"
   local line_number="$1"
   local command="$2"
-  post_update_to_api "failed" "$exit_code"
+  post_update_to_api "failed" "$command"
   local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}"
   echo -e "\n$error_message\n"
   cleanup_vmid
@@ -483,11 +483,6 @@ btrfs)
   FORMAT=",efitype=4m"
   THIN=""
   ;;
-*)
-  DISK_EXT=""
-  DISK_REF=""
-  DISK_IMPORT="-format raw"
-  ;;
 esac
 for i in {0,1}; do
   disk="DISK$i"

vm/umbrel-os-vm.sh

@@ -69,7 +69,7 @@ function error_handler() {
   local line_number="$1"
   local command="$2"
   local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}"
-  post_update_to_api "failed" "${exit_code}"
+  post_update_to_api "failed" "${command}"
   echo -e "\n$error_message\n"
   cleanup_vmid
 }