Update CHANGELOG.md

* fix(tdarr): use curl_with_retry and verify binaries before enabling service

Tdarr_Updater downloads the actual server/node binaries from tdarr.io at
runtime. If tdarr.io is blocked by local DNS (e.g. OPNsense OISD blocklists),
the updater exits silently with code 0, leaving no binaries on disk. The
subsequent systemctl enable then fails with 'Operation not permitted' (exit 1)
because the ExecStart paths don't exist.

Changes:
- Replace bare curl with curl_with_retry for versions.json and Tdarr_Updater.zip
  downloads to gain retry logic, DNS pre-check and exponential backoff
- Add msg_info before Tdarr_Updater run so users see this step in the log
- Check that Tdarr_Server and Tdarr_Node binaries exist after the updater
  runs; fail immediately with a clear message pointing to tdarr.io connectivity
  instead of letting systemctl fail with a confusing 'Operation not permitted'

Fixes: #13030

* Improve Tdarr installer error handling

Refine post-update validation and failure behavior in tdarr-install.sh: remove a redundant status message, simplify the updater check to only require the Tdarr_Server binary, and replace the previous fatal path with msg_error plus an explicit exit 250. This makes failures (for example when tdarr.io is blocked by local DNS) clearer and avoids false negatives from the Tdarr_Node existence check.

* Use curl_with_retry and handle updater failure

Replace direct curl calls with curl_with_retry for fetching versions.json and downloading Tdarr_Updater.zip to improve network reliability. Add a post-update check that verifies /opt/tdarr/Tdarr_Server/Tdarr_Server exists; if missing, log an error suggesting possible DNS blocking and exit with code 250. Minor cleanup of updater artifacts remains unchanged.

* Reorder hwaccel setup and adjust GPU group usermod

Move setup_hwaccel invocations in emby, jellyfin, ollama, and plex installers to occur after package installation/configuration so GPU drivers/repos are present before enabling hardware acceleration. Update _setup_gpu_permissions to call usermod directly (remove $STD wrapper) when adding service users to render/video groups. Includes minor whitespace/ordering cleanups in the installer scripts.

.github/workflows/delete-pocketbase-entry-on-removal.yml

@@ -75,7 +75,8 @@ jobs:
             const http = require('http');
             const url = require('url');
 
-            function request(fullUrl, opts) {
+            function request(fullUrl, opts, redirectCount) {
+              redirectCount = redirectCount || 0;
               return new Promise(function(resolve, reject) {
                 const u = url.parse(fullUrl);
                 const isHttps = u.protocol === 'https:';
@@ -90,6 +91,13 @@ jobs:
                 if (body) options.headers['Content-Length'] = Buffer.byteLength(body);
                 const lib = isHttps ? https : http;
                 const req = lib.request(options, function(res) {
+                  if (res.statusCode >= 300 && res.statusCode < 400 && res.headers.location) {
+                    if (redirectCount >= 5) return reject(new Error('Too many redirects from ' + fullUrl));
+                    const redirectUrl = url.resolve(fullUrl, res.headers.location);
+                    res.resume();
+                    resolve(request(redirectUrl, opts, redirectCount + 1));
+                    return;
+                  }
                   let data = '';
                   res.on('data', function(chunk) { data += chunk; });
                   res.on('end', function() {

.github/workflows/push-json-to-pocketbase.yml

@@ -48,7 +48,8 @@ jobs:
           const https = require('https');
           const http = require('http');
           const url = require('url');
-          function request(fullUrl, opts) {
+          function request(fullUrl, opts, redirectCount) {
+            redirectCount = redirectCount || 0;
             return new Promise(function(resolve, reject) {
               const u = url.parse(fullUrl);
               const isHttps = u.protocol === 'https:';
@@ -63,6 +64,13 @@ jobs:
               if (body) options.headers['Content-Length'] = Buffer.byteLength(body);
               const lib = isHttps ? https : http;
               const req = lib.request(options, function(res) {
+                if (res.statusCode >= 300 && res.statusCode < 400 && res.headers.location) {
+                  if (redirectCount >= 5) return reject(new Error('Too many redirects from ' + fullUrl));
+                  const redirectUrl = url.resolve(fullUrl, res.headers.location);
+                  res.resume();
+                  resolve(request(redirectUrl, opts, redirectCount + 1));
+                  return;
+                }
                 let data = '';
                 res.on('data', function(chunk) { data += chunk; });
                 res.on('end', function() {
@@ -125,15 +133,15 @@ jobs:
           var osVersionToId = {};
           try {
             const res = await request(apiBase + '/collections/z_ref_note_types/records?perPage=500', { headers: { 'Authorization': token } });
-            if (res.ok) JSON.parse(res.body).items?.forEach(function(item) { if (item.type != null) noteTypeToId[item.type] = item.id; });
+            if (res.ok) JSON.parse(res.body).items?.forEach(function(item) { if (item.type != null) { noteTypeToId[item.type] = item.id; noteTypeToId[item.type.toLowerCase()] = item.id; } });
           } catch (e) { console.warn('z_ref_note_types:', e.message); }
           try {
             const res = await request(apiBase + '/collections/z_ref_install_method_types/records?perPage=500', { headers: { 'Authorization': token } });
-            if (res.ok) JSON.parse(res.body).items?.forEach(function(item) { if (item.type != null) installMethodTypeToId[item.type] = item.id; });
+            if (res.ok) JSON.parse(res.body).items?.forEach(function(item) { if (item.type != null) { installMethodTypeToId[item.type] = item.id; installMethodTypeToId[item.type.toLowerCase()] = item.id; } });
           } catch (e) { console.warn('z_ref_install_method_types:', e.message); }
           try {
             const res = await request(apiBase + '/collections/z_ref_os/records?perPage=500', { headers: { 'Authorization': token } });
-            if (res.ok) JSON.parse(res.body).items?.forEach(function(item) { if (item.os != null) osToId[item.os] = item.id; });
+            if (res.ok) JSON.parse(res.body).items?.forEach(function(item) { if (item.os != null) { osToId[item.os] = item.id; osToId[item.os.toLowerCase()] = item.id; } });
           } catch (e) { console.warn('z_ref_os:', e.message); }
           try {
             const res = await request(apiBase + '/collections/z_ref_os_version/records?perPage=500&expand=os', { headers: { 'Authorization': token } });
@@ -154,7 +162,7 @@ jobs:
               name: data.name,
               slug: data.slug,
               script_created: data.date_created || data.script_created,
-              script_updated: data.date_created || data.script_updated,
+              script_updated: new Date().toISOString().split('T')[0],
               updateable: data.updateable,
               privileged: data.privileged,
               port: data.interface_port != null ? data.interface_port : data.port,
@@ -163,8 +171,8 @@ jobs:
               logo: data.logo,
               description: data.description,
               config_path: data.config_path,
-              default_user: (data.default_credentials && data.default_credentials.username) || data.default_user,
-              default_passwd: (data.default_credentials && data.default_credentials.password) || data.default_passwd,
+              default_user: (data.default_credentials && data.default_credentials.username) || data.default_user || null,
+              default_passwd: (data.default_credentials && data.default_credentials.password) || data.default_passwd || null,
               is_dev: false
             };
             var resolvedType = typeValueToId[data.type];
@@ -190,7 +198,7 @@ jobs:
                 var postRes = await request(notesCollUrl, {
                   method: 'POST',
                   headers: { 'Authorization': token, 'Content-Type': 'application/json' },
-                  body: JSON.stringify({ text: note.text || '', type: typeId })
+                  body: JSON.stringify({ text: note.text || '', type: typeId, script: scriptId })
                 });
                 if (postRes.ok) noteIds.push(JSON.parse(postRes.body).id);
               }

.github/workflows/update-script-timestamp-on-sh-change.yml

@@ -83,7 +83,8 @@ jobs:
             const http = require('http');
             const url = require('url');
 
-            function request(fullUrl, opts) {
+            function request(fullUrl, opts, redirectCount) {
+              redirectCount = redirectCount || 0;
               return new Promise(function(resolve, reject) {
                 const u = url.parse(fullUrl);
                 const isHttps = u.protocol === 'https:';
@@ -98,6 +99,13 @@ jobs:
                 if (body) options.headers['Content-Length'] = Buffer.byteLength(body);
                 const lib = isHttps ? https : http;
                 const req = lib.request(options, function(res) {
+                  if (res.statusCode >= 300 && res.statusCode < 400 && res.headers.location) {
+                    if (redirectCount >= 5) return reject(new Error('Too many redirects from ' + fullUrl));
+                    const redirectUrl = url.resolve(fullUrl, res.headers.location);
+                    res.resume();
+                    resolve(request(redirectUrl, opts, redirectCount + 1));
+                    return;
+                  }
                   let data = '';
                   res.on('data', function(chunk) { data += chunk; });
                   res.on('end', function() {
@@ -151,7 +159,7 @@ jobs:
                 method: 'PATCH',
                 headers: { 'Authorization': token, 'Content-Type': 'application/json' },
                 body: JSON.stringify({
-                  name: record.name || record.slug,
+                  script_updated: new Date().toISOString().split('T')[0],
                   last_update_commit: process.env.PR_URL || process.env.COMMIT_URL || ''
                 })
               });

CHANGELOG.md

@@ -423,12 +423,76 @@ Exercise vigilance regarding copycat or coat-tailing sites that seek to exploit
 
 </details>
 
-## 2026-03-16
+## 2026-03-19
 
 ### 🚀 Updated Scripts
 
   - #### 🐞 Bug Fixes
 
+    - core: reorder hwaccel setup and adjust GPU group usermod [@MickLesk](https://github.com/MickLesk) ([#13072](https://github.com/community-scripts/ProxmoxVE/pull/13072))
+
+## 2026-03-18
+
+### 🆕 New Scripts
+
+  - Alpine-Ntfy [@MickLesk](https://github.com/MickLesk) ([#13048](https://github.com/community-scripts/ProxmoxVE/pull/13048))
+- Split-Pro ([#12975](https://github.com/community-scripts/ProxmoxVE/pull/12975))
+
+### 🚀 Updated Scripts
+
+  - #### 🐞 Bug Fixes
+
+    - Tdarr: use curl_with_retry and correct exit code [@MickLesk](https://github.com/MickLesk) ([#13060](https://github.com/community-scripts/ProxmoxVE/pull/13060))
+    - reitti: fix: v4 [@CrazyWolf13](https://github.com/CrazyWolf13) ([#13039](https://github.com/community-scripts/ProxmoxVE/pull/13039))
+    - Paperless-NGX: increase default RAM to 3GB [@MickLesk](https://github.com/MickLesk) ([#13018](https://github.com/community-scripts/ProxmoxVE/pull/13018))
+    - Plex: restart service after update to apply new version [@MickLesk](https://github.com/MickLesk) ([#13017](https://github.com/community-scripts/ProxmoxVE/pull/13017))
+
+  - #### ✨ New Features
+
+    - tools: centralize GPU group setup via setup_hwaccel [@MickLesk](https://github.com/MickLesk) ([#13044](https://github.com/community-scripts/ProxmoxVE/pull/13044))
+    - Termix: add guacd build and systemd integration [@MickLesk](https://github.com/MickLesk) ([#12999](https://github.com/community-scripts/ProxmoxVE/pull/12999))
+
+  - #### 🔧 Refactor
+
+    - Podman: replace deprecated commands with Quadlets [@MickLesk](https://github.com/MickLesk) ([#13052](https://github.com/community-scripts/ProxmoxVE/pull/13052))
+    - Refactor: Jellyfin repo, ffmpeg package and symlinks [@MickLesk](https://github.com/MickLesk) ([#13045](https://github.com/community-scripts/ProxmoxVE/pull/13045))
+    - pve-scripts-local: Increase default disk size from 4GB to 10GB [@MickLesk](https://github.com/MickLesk) ([#13009](https://github.com/community-scripts/ProxmoxVE/pull/13009))
+
+### 💾 Core
+
+  - #### ✨ New Features
+
+    - tools.func Implement pg_cron setup for setup_postgresql [@MickLesk](https://github.com/MickLesk) ([#13053](https://github.com/community-scripts/ProxmoxVE/pull/13053))
+    - tools.func: Implement check_for_gh_tag function [@MickLesk](https://github.com/MickLesk) ([#12998](https://github.com/community-scripts/ProxmoxVE/pull/12998))
+    - tools.func: Implement fetch_and_deploy_gh_tag function [@MickLesk](https://github.com/MickLesk) ([#13000](https://github.com/community-scripts/ProxmoxVE/pull/13000))
+
+## 2026-03-17
+
+### 🚀 Updated Scripts
+
+  - #### 🐞 Bug Fixes
+
+    - Gluetun: add OpenVPN process user and cleanup stale config [@MickLesk](https://github.com/MickLesk) ([#13016](https://github.com/community-scripts/ProxmoxVE/pull/13016))
+    - Frigate: check OpenVino model files exist before configuring detector and use curl_with_retry instead of default wget [@MickLesk](https://github.com/MickLesk) ([#13019](https://github.com/community-scripts/ProxmoxVE/pull/13019))
+
+### 💾 Core
+
+  - #### 🔧 Refactor
+
+    - tools.func: Update `create_self_signed_cert()` [@tremor021](https://github.com/tremor021) ([#13008](https://github.com/community-scripts/ProxmoxVE/pull/13008))
+
+## 2026-03-16
+
+### 🆕 New Scripts
+
+  - Gluetun ([#12976](https://github.com/community-scripts/ProxmoxVE/pull/12976))
+- Anytype-Server ([#12974](https://github.com/community-scripts/ProxmoxVE/pull/12974))
+
+### 🚀 Updated Scripts
+
+  - #### 🐞 Bug Fixes
+
+    - Immich: use gcc-13 for compilation & add uv python pre-install with retry logic [@MickLesk](https://github.com/MickLesk) ([#12935](https://github.com/community-scripts/ProxmoxVE/pull/12935))
     - Tautulli: add setuptools<81 constraint to update script [@MickLesk](https://github.com/MickLesk) ([#12959](https://github.com/community-scripts/ProxmoxVE/pull/12959))
     - Seerr: add missing build deps [@MickLesk](https://github.com/MickLesk) ([#12960](https://github.com/community-scripts/ProxmoxVE/pull/12960))
     - fix: yubal update [@CrazyWolf13](https://github.com/CrazyWolf13) ([#12961](https://github.com/community-scripts/ProxmoxVE/pull/12961))

ct/alpine-ntfy.sh

@@ -0,0 +1,50 @@
+#!/usr/bin/env bash
+source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/build.func)
+
+# Copyright (c) 2021-2026 community-scripts ORG
+# Author: cobalt (cobaltgit)
+# License: MIT | https://github.com/community-scripts/ProxmoxVED/raw/main/LICENSE
+# Source: https://ntfy.sh/
+
+APP="Alpine-ntfy"
+var_tags="${var_tags:-notification}"
+var_cpu="${var_cpu:-1}"
+var_ram="${var_ram:-256}"
+var_disk="${var_disk:-2}"
+var_os="${var_os:-alpine}"
+var_version="${var_version:-3.23}"
+var_unprivileged="${var_unprivileged:-1}"
+
+header_info "$APP"
+variables
+color
+catch_errors
+
+function update_script() {
+  header_info
+  check_container_storage
+  check_container_resources
+  if [[ ! -d /etc/ntfy ]]; then
+    msg_error "No ${APP} Installation Found!"
+    exit
+  fi
+  msg_info "Updating ntfy LXC"
+  $STD apk -U upgrade
+  setcap 'cap_net_bind_service=+ep' /usr/bin/ntfy
+  msg_ok "Updated ntfy LXC"
+
+  msg_info "Restarting ntfy"
+  rc-service ntfy restart
+  msg_ok "Restarted ntfy"
+  msg_ok "Updated successfully!"
+  exit
+}
+
+start
+build_container
+description
+
+msg_ok "Completed successfully!\n"
+echo -e "${CREATING}${GN}${APP} setup has been successfully initialized!${CL}"
+echo -e "${INFO}${YW} Access it using the following URL:${CL}"
+echo -e "${TAB}${GATEWAY}${BGN}http://${IP}${CL}"

ct/anytype-server.sh

@@ -0,0 +1,67 @@
+#!/usr/bin/env bash
+source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/build.func)
+
+# Copyright (c) 2021-2026 community-scripts ORG
+# Author: MickLesk (CanbiZ)
+# License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
+# Source: https://anytype.io
+
+APP="Anytype-Server"
+var_tags="${var_tags:-notes;productivity;sync}"
+var_cpu="${var_cpu:-2}"
+var_ram="${var_ram:-4096}"
+var_disk="${var_disk:-16}"
+var_os="${var_os:-ubuntu}"
+var_version="${var_version:-24.04}"
+var_unprivileged="${var_unprivileged:-1}"
+
+header_info "$APP"
+variables
+color
+catch_errors
+
+function update_script() {
+  header_info
+  check_container_storage
+  check_container_resources
+
+  if [[ ! -f /opt/anytype/any-sync-bundle ]]; then
+    msg_error "No ${APP} Installation Found!"
+    exit
+  fi
+
+  if check_for_gh_release "anytype" "grishy/any-sync-bundle"; then
+    msg_info "Stopping Service"
+    systemctl stop anytype
+    msg_ok "Stopped Service"
+
+    msg_info "Backing up Data"
+    cp -r /opt/anytype/data /opt/anytype_data_backup
+    msg_ok "Backed up Data"
+
+    CLEAN_INSTALL=1 fetch_and_deploy_gh_release "anytype" "grishy/any-sync-bundle" "prebuild" "latest" "/opt/anytype" "any-sync-bundle_*_linux_amd64.tar.gz"
+    chmod +x /opt/anytype/any-sync-bundle
+
+    msg_info "Restoring Data"
+    cp -r /opt/anytype_data_backup/. /opt/anytype/data
+    rm -rf /opt/anytype_data_backup
+    msg_ok "Restored Data"
+
+    msg_info "Starting Service"
+    systemctl start anytype
+    msg_ok "Started Service"
+    msg_ok "Updated successfully!"
+  fi
+  exit
+}
+
+start
+build_container
+description
+
+msg_ok "Completed Successfully!\n"
+echo -e "${CREATING}${GN}${APP} setup has been successfully initialized!${CL}"
+echo -e "${INFO}${YW} Access it using the following URL:${CL}"
+echo -e "${TAB}${GATEWAY}${BGN}http://${IP}:33010${CL}"
+echo -e "${INFO}${YW} Client config file:${CL}"
+echo -e "${TAB}${GATEWAY}${BGN}/opt/anytype/data/client-config.yml${CL}"

ct/gluetun.sh

@@ -0,0 +1,61 @@
+#!/usr/bin/env bash
+source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/build.func)
+# Copyright (c) 2021-2026 community-scripts ORG
+# Author: MickLesk (CanbiZ)
+# License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
+# Source: https://github.com/qdm12/gluetun
+
+APP="Gluetun"
+var_tags="${var_tags:-vpn;wireguard;openvpn}"
+var_cpu="${var_cpu:-2}"
+var_ram="${var_ram:-2048}"
+var_disk="${var_disk:-8}"
+var_os="${var_os:-debian}"
+var_version="${var_version:-13}"
+var_unprivileged="${var_unprivileged:-1}"
+var_tun="${var_tun:-yes}"
+
+header_info "$APP"
+variables
+color
+catch_errors
+
+function update_script() {
+  header_info
+  check_container_storage
+  check_container_resources
+
+  if [[ ! -f /usr/local/bin/gluetun ]]; then
+    msg_error "No ${APP} Installation Found!"
+    exit
+  fi
+
+  if check_for_gh_release "gluetun" "qdm12/gluetun"; then
+    msg_info "Stopping Service"
+    systemctl stop gluetun
+    msg_ok "Stopped Service"
+
+    CLEAN_INSTALL=1 fetch_and_deploy_gh_release "gluetun" "qdm12/gluetun" "tarball"
+
+    msg_info "Building Gluetun"
+    cd /opt/gluetun
+    $STD go mod download
+    CGO_ENABLED=0 $STD go build -trimpath -ldflags="-s -w" -o /usr/local/bin/gluetun ./cmd/gluetun/
+    msg_ok "Built Gluetun"
+
+    msg_info "Starting Service"
+    systemctl start gluetun
+    msg_ok "Started Service"
+    msg_ok "Updated successfully!"
+  fi
+  exit
+}
+
+start
+build_container
+description
+
+msg_ok "Completed Successfully!\n"
+echo -e "${CREATING}${GN}${APP} setup has been successfully initialized!${CL}"
+echo -e "${INFO}${YW} Access it using the following URL:${CL}"
+echo -e "${TAB}${GATEWAY}${BGN}http://${IP}:8000${CL}"

ct/headers/alpine-ntfy

@@ -0,0 +1,6 @@
+    ___    __      _                        __  ____     
+   /   |  / /___  (_)___  ___        ____  / /_/ __/_  __
+  / /| | / / __ \/ / __ \/ _ \______/ __ \/ __/ /_/ / / /
+ / ___ |/ / /_/ / / / / /  __/_____/ / / / /_/ __/ /_/ / 
+/_/  |_/_/ .___/_/_/ /_/\___/     /_/ /_/\__/_/  \__, /  
+        /_/                                     /____/   

ct/headers/anytype-server

@@ -0,0 +1,6 @@
+    ___                __                        _____                          
+   /   |  ____  __  __/ /___  ______  ___       / ___/___  ______   _____  _____
+  / /| | / __ \/ / / / __/ / / / __ \/ _ \______\__ \/ _ \/ ___/ | / / _ \/ ___/
+ / ___ |/ / / / /_/ / /_/ /_/ / /_/ /  __/_____/__/ /  __/ /   | |/ /  __/ /    
+/_/  |_/_/ /_/\__, /\__/\__, / .___/\___/     /____/\___/_/    |___/\___/_/     
+             /____/    /____/_/                                                 

ct/headers/gluetun

@@ -0,0 +1,6 @@
+   ________           __            
+  / ____/ /_  _____  / /___  ______ 
+ / / __/ / / / / _ \/ __/ / / / __ \
+/ /_/ / / /_/ /  __/ /_/ /_/ / / / /
+\____/_/\__,_/\___/\__/\__,_/_/ /_/ 
+                                    

ct/headers/split-pro

@@ -0,0 +1,6 @@
+   _____       ___ __        ____           
+  / ___/____  / (_) /_      / __ \_________ 
+  \__ \/ __ \/ / / __/_____/ /_/ / ___/ __ \
+ ___/ / /_/ / / / /_/_____/ ____/ /  / /_/ /
+/____/ .___/_/_/\__/     /_/   /_/   \____/ 
+    /_/                                     

ct/immich.sh

@@ -76,7 +76,7 @@ EOF
   SOURCE_DIR=${STAGING_DIR}/image-source
   cd /tmp
   if [[ -f ~/.intel_version ]]; then
-    curl -fsSLO https://raw.githubusercontent.com/immich-app/immich/refs/heads/main/machine-learning/Dockerfile
+    curl_with_retry "https://raw.githubusercontent.com/immich-app/immich/refs/heads/main/machine-learning/Dockerfile" "Dockerfile"
     readarray -t INTEL_URLS < <(
       sed -n "/intel-[igc|opencl]/p" ./Dockerfile | awk '{print $3}'
       sed -n "/libigdgmm12/p" ./Dockerfile | awk '{print $3}'
@@ -85,7 +85,7 @@ EOF
     if [[ "$INTEL_RELEASE" != "$(cat ~/.intel_version)" ]]; then
       msg_info "Updating Intel iGPU dependencies"
       for url in "${INTEL_URLS[@]}"; do
-        curl -fsSLO "$url"
+        curl_with_retry "$url" "$(basename "$url")"
       done
       $STD apt-mark unhold libigdgmm12
       $STD apt install -y --allow-downgrades ./libigdgmm12*.deb
@@ -133,7 +133,7 @@ EOF
       $STD sudo -u postgres psql -d immich -c "REINDEX INDEX face_index;"
       $STD sudo -u postgres psql -d immich -c "REINDEX INDEX clip_index;"
     fi
-    ensure_dependencies ccache
+    ensure_dependencies ccache gcc-13 g++-13
 
     INSTALL_DIR="/opt/${APP}"
     UPLOAD_DIR="$(sed -n '/^IMMICH_MEDIA_LOCATION/s/[^=]*=//p' /opt/immich/.env)"
@@ -166,7 +166,7 @@ EOF
 
     setup_uv
     CLEAN_INSTALL=1 fetch_and_deploy_gh_release "Immich" "immich-app/immich" "tarball" "${RELEASE}" "$SRC_DIR"
-    PNPM_VERSION="$(jq -r '.packageManager | split("@")[1]' ${SRC_DIR}/package.json)"
+    PNPM_VERSION="$(jq -r '.packageManager | split("@")[1] | split("+")[0]' ${SRC_DIR}/package.json)"
     NODE_VERSION="24" NODE_MODULE="pnpm@${PNPM_VERSION}" setup_nodejs
 
     msg_info "Updating Immich web and microservices"
@@ -217,15 +217,36 @@ EOF
     chown -R immich:immich "$INSTALL_DIR"
     chown immich:immich ./uv.lock
     export VIRTUAL_ENV="${ML_DIR}"/ml-venv
+    export UV_HTTP_TIMEOUT=300
     if [[ -f ~/.openvino ]]; then
+      ML_PYTHON="python3.13"
+      msg_info "Pre-installing Python ${ML_PYTHON} for machine-learning"
+      for attempt in $(seq 1 3); do
+        $STD sudo --preserve-env=VIRTUAL_ENV -nu immich uv python install "${ML_PYTHON}" && break
+        [[ $attempt -lt 3 ]] && msg_warn "Python download attempt $attempt failed, retrying..." && sleep 5
+      done
+      msg_ok "Pre-installed Python ${ML_PYTHON}"
       msg_info "Updating HW-accelerated machine-learning"
-      $STD uv add --no-sync --optional openvino onnxruntime-openvino==1.24.1 --active -n -p python3.13 --managed-python
-      $STD sudo --preserve-env=VIRTUAL_ENV -nu immich uv sync --extra openvino --no-dev --active --link-mode copy -n -p python3.13 --managed-python
+      $STD uv add --no-sync --optional openvino onnxruntime-openvino==1.24.1 --active -n -p "${ML_PYTHON}" --managed-python
+      for attempt in $(seq 1 3); do
+        $STD sudo --preserve-env=VIRTUAL_ENV,UV_HTTP_TIMEOUT -nu immich uv sync --extra openvino --no-dev --active --link-mode copy -n -p "${ML_PYTHON}" --managed-python && break
+        [[ $attempt -lt 3 ]] && msg_warn "uv sync attempt $attempt failed, retrying..." && sleep 10
+      done
       patchelf --clear-execstack "${VIRTUAL_ENV}/lib/python3.13/site-packages/onnxruntime/capi/onnxruntime_pybind11_state.cpython-313-x86_64-linux-gnu.so"
       msg_ok "Updated HW-accelerated machine-learning"
     else
+      ML_PYTHON="python3.11"
+      msg_info "Pre-installing Python ${ML_PYTHON} for machine-learning"
+      for attempt in $(seq 1 3); do
+        $STD sudo --preserve-env=VIRTUAL_ENV -nu immich uv python install "${ML_PYTHON}" && break
+        [[ $attempt -lt 3 ]] && msg_warn "Python download attempt $attempt failed, retrying..." && sleep 5
+      done
+      msg_ok "Pre-installed Python ${ML_PYTHON}"
       msg_info "Updating machine-learning"
-      $STD sudo --preserve-env=VIRTUAL_ENV -nu immich uv sync --extra cpu --no-dev --active --link-mode copy -n -p python3.11 --managed-python
+      for attempt in $(seq 1 3); do
+        $STD sudo --preserve-env=VIRTUAL_ENV,UV_HTTP_TIMEOUT -nu immich uv sync --extra cpu --no-dev --active --link-mode copy -n -p "${ML_PYTHON}" --managed-python && break
+        [[ $attempt -lt 3 ]] && msg_warn "uv sync attempt $attempt failed, retrying..." && sleep 10
+      done
       msg_ok "Updated machine-learning"
     fi
     cd "$SRC_DIR"

ct/jellyfin.sh

@@ -39,14 +39,23 @@ function update_script() {
     msg_ok "Updated Intel Dependencies"
   fi
 
+  msg_info "Setting up Jellyfin Repository"
+  setup_deb822_repo \
+    "jellyfin" \
+    "https://repo.jellyfin.org/jellyfin_team.gpg.key" \
+    "https://repo.jellyfin.org/$(get_os_info id)" \
+    "$(get_os_info codename)"
+  msg_ok "Set up Jellyfin Repository"
+
   msg_info "Updating Jellyfin"
   ensure_dependencies libjemalloc2
   if [[ ! -f /usr/lib/libjemalloc.so ]]; then
     ln -sf /usr/lib/x86_64-linux-gnu/libjemalloc.so.2 /usr/lib/libjemalloc.so
   fi
-  $STD apt update
   $STD apt -y upgrade
-  $STD apt -y --with-new-pkgs upgrade jellyfin jellyfin-server
+  $STD apt -y --with-new-pkgs upgrade jellyfin jellyfin-server jellyfin-ffmpeg7
+  ln -sf /usr/lib/jellyfin-ffmpeg/ffmpeg /usr/bin/ffmpeg
+  ln -sf /usr/lib/jellyfin-ffmpeg/ffprobe /usr/bin/ffprobe
   msg_ok "Updated Jellyfin"
   msg_ok "Updated successfully!"
   exit

ct/paperless-ngx.sh

@@ -8,7 +8,7 @@ source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxV
 APP="Paperless-ngx"
 var_tags="${var_tags:-document;management}"
 var_cpu="${var_cpu:-2}"
-var_ram="${var_ram:-2048}"
+var_ram="${var_ram:-3072}"
 var_disk="${var_disk:-12}"
 var_os="${var_os:-debian}"
 var_version="${var_version:-13}"

ct/plex.sh

@@ -79,6 +79,11 @@ function update_script() {
   $STD apt update
   $STD apt install -y plexmediaserver
   msg_ok "Updated Plex Media Server"
+
+  msg_info "Restarting Plex Media Server"
+  systemctl restart plexmediaserver
+  msg_ok "Restarted Plex Media Server"
+
   msg_ok "Updated successfully!"
   exit
 }

ct/podman-homeassistant.sh

@@ -23,7 +23,7 @@ function update_script() {
   header_info
   check_container_storage
   check_container_resources
-  if [[ ! -f /etc/systemd/system/homeassistant.service ]]; then
+  if [[ ! -f /etc/containers/systemd/homeassistant.container ]]; then
     msg_error "No ${APP} Installation Found!"
     exit
   fi

ct/pve-scripts-local.sh

@@ -9,7 +9,7 @@ APP="PVE-Scripts-Local"
 var_tags="${var_tags:-pve-scripts-local}"
 var_cpu="${var_cpu:-2}"
 var_ram="${var_ram:-4096}"
-var_disk="${var_disk:-4}"
+var_disk="${var_disk:-10}"
 var_os="${var_os:-debian}"
 var_version="${var_version:-13}"
 var_unprivileged="${var_unprivileged:-1}"

ct/reitti.sh

@@ -89,17 +89,49 @@ EOF
     msg_ok "Started Service"
     msg_ok "Updated successfully!"
   fi
+  
   if check_for_gh_release "photon" "komoot/photon"; then
+    if [[ -f "$HOME/.photon" ]] && [[ "$(cat "$HOME/.photon")" == 0.7 ]]; then
+      CURRENT_VERSION="$(<"$HOME/.photon")"
+      echo
+      echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
+      echo "Photon v1 upgrade detected (breaking change)"
+      echo
+      echo "Your current version: $CURRENT_VERSION"
+      echo
+      echo "Photon v1 requires a manual migration before updating."
+      echo
+      echo "You need to:"
+      echo "  1. Remove existing geocoding data (not actual reitti data):"
+      echo "     rm -rf /opt/photon_data"
+      echo
+      echo "  2. Follow the inial setup guide again:"
+      echo "     https://github.com/community-scripts/ProxmoxVE/discussions/8737"
+      echo
+      echo "  3. Re-download and import Photon data for v1"
+      echo
+      read -rp "Do you want to continue anyway? (y/N): " CONTINUE
+      echo
+        
+      if [[ ! "$CONTINUE" =~ ^[Yy]$ ]]; then
+        msg_info "Migration required. Update cancelled."
+        exit 0
+      fi
+        
+      msg_warn "Continuing without migration may break Photon in the future!"
+    fi
+  
     msg_info "Stopping Service"
     systemctl stop photon
     msg_ok "Stopped Service"
 
     rm -f /opt/photon/photon.jar
-    USE_ORIGINAL_FILENAME="true" fetch_and_deploy_gh_release "photon" "komoot/photon" "singlefile" "latest" "/opt/photon" "photon-0*.jar"
+    USE_ORIGINAL_FILENAME="true" fetch_and_deploy_gh_release "photon" "komoot/photon" "singlefile" "latest" "/opt/photon" "photon-*.jar"
     mv /opt/photon/photon-*.jar /opt/photon/photon.jar
 
     msg_info "Starting Service"
     systemctl start photon
+    systemctl restart nginx
     msg_ok "Started Service"
     msg_ok "Updated successfully!"
   fi

ct/sparkyfitness.sh

@@ -51,7 +51,7 @@ function update_script() {
 
     msg_info "Updating Sparky Fitness Backend"
     cd /opt/sparkyfitness/SparkyFitnessServer
-    $STD npm install --legacy-peer-deps
+    $STD pnpm install
     msg_ok "Updated Sparky Fitness Backend"
 
     msg_info "Updating Sparky Fitness Frontend (Patience)"

ct/split-pro.sh

@@ -0,0 +1,68 @@
+#!/usr/bin/env bash
+source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/build.func)
+
+# Copyright (c) 2021-2026 community-scripts ORG
+# Author: johanngrobe
+# License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
+# Source: https://github.com/oss-apps/split-pro
+
+APP="Split-Pro"
+var_tags="${var_tags:-finance;expense-sharing}"
+var_cpu="${var_cpu:-2}"
+var_ram="${var_ram:-4096}"
+var_disk="${var_disk:-6}"
+var_os="${var_os:-debian}"
+var_version="${var_version:-13}"
+var_unprivileged="${var_unprivileged:-1}"
+
+variables
+color
+catch_errors
+
+function update_script() {
+  header_info
+  check_container_storage
+  check_container_resources
+
+  if [[ ! -d /opt/split-pro ]]; then
+    msg_error "No Split Pro Installation Found!"
+    exit
+  fi
+
+  if check_for_gh_release "split-pro" "oss-apps/split-pro"; then
+    msg_info "Stopping Service"
+    systemctl stop split-pro
+    msg_ok "Stopped Service"
+
+    msg_info "Backing up Data"
+    cp /opt/split-pro/.env /opt/split-pro.env
+    msg_ok "Backed up Data"
+
+    CLEAN_INSTALL=1 fetch_and_deploy_gh_release "split-pro" "oss-apps/split-pro" "tarball"
+
+    msg_info "Building Application"
+    cd /opt/split-pro
+    $STD pnpm install --frozen-lockfile
+    $STD pnpm build
+    cp /opt/split-pro.env /opt/split-pro/.env
+    rm -f /opt/split-pro.env
+    ln -sf /opt/split-pro_data/uploads /opt/split-pro/uploads
+    $STD pnpm exec prisma migrate deploy
+    msg_ok "Built Application"
+
+    msg_info "Starting Service"
+    systemctl start split-pro
+    msg_ok "Started Service"
+    msg_ok "Updated successfully!"
+  fi
+  exit
+}
+
+start
+build_container
+description
+
+msg_ok "Completed successfully!\n"
+echo -e "${CREATING}${GN}${APP} setup has been successfully initialized!${CL}"
+echo -e "${INFO}${YW} Access it using the following URL:${CL}"
+echo -e "${TAB}${GATEWAY}${BGN}http://${IP}:3000${CL}"

ct/tdarr.sh

@@ -33,12 +33,16 @@ function update_script() {
   $STD apt upgrade -y
   rm -rf /opt/tdarr/Tdarr_Updater
   cd /opt/tdarr
-  RELEASE=$(curl -fsSL https://f000.backblazeb2.com/file/tdarrs/versions.json | grep -oP '(?<="Tdarr_Updater": ")[^"]+' | grep linux_x64 | head -n 1)
-  curl -fsSL "$RELEASE" -o Tdarr_Updater.zip
+  RELEASE=$(curl_with_retry "https://f000.backblazeb2.com/file/tdarrs/versions.json" "-" | grep -oP '(?<="Tdarr_Updater": ")[^"]+' | grep linux_x64 | head -n 1)
+  curl_with_retry "$RELEASE" "Tdarr_Updater.zip"
   $STD unzip Tdarr_Updater.zip
   chmod +x Tdarr_Updater
   $STD ./Tdarr_Updater
   rm -rf /opt/tdarr/Tdarr_Updater.zip
+  [[ -f /opt/tdarr/Tdarr_Server/Tdarr_Server ]] || {
+    msg_error "Tdarr_Updater failed — tdarr.io may be blocked by local DNS"
+    exit 250
+  }
   msg_ok "Updated Tdarr"
   msg_ok "Updated successfully!"
   exit

ct/termix.sh

@@ -29,10 +29,116 @@ function update_script() {
     exit
   fi
 
+  if check_for_gh_tag "guacd" "apache/guacamole-server"; then
+    msg_info "Stopping guacd"
+    systemctl stop guacd 2>/dev/null || true
+    msg_ok "Stopped guacd"
+
+    ensure_dependencies \
+      libcairo2-dev \
+      libjpeg62-turbo-dev \
+      libpng-dev \
+      libtool-bin \
+      uuid-dev \
+      libvncserver-dev \
+      freerdp3-dev \
+      libssh2-1-dev \
+      libtelnet-dev \
+      libwebsockets-dev \
+      libpulse-dev \
+      libvorbis-dev \
+      libwebp-dev \
+      libssl-dev \
+      libpango1.0-dev \
+      libswscale-dev \
+      libavcodec-dev \
+      libavutil-dev \
+      libavformat-dev
+
+    msg_info "Updating Guacamole Server (guacd)"
+    fetch_and_deploy_gh_tag "guacd" "apache/guacamole-server" "${CHECK_UPDATE_RELEASE}" "/opt/guacamole-server"
+    cd /opt/guacamole-server
+    export CPPFLAGS="-Wno-error=deprecated-declarations"
+    $STD autoreconf -fi
+    $STD ./configure --with-init-dir=/etc/init.d --enable-allow-freerdp-snapshots
+    $STD make
+    $STD make install
+    $STD ldconfig
+    cd /opt
+    rm -rf /opt/guacamole-server
+    msg_ok "Updated Guacamole Server (guacd) to ${CHECK_UPDATE_RELEASE}"
+
+    if [[ ! -f /etc/guacamole/guacd.conf ]]; then
+      mkdir -p /etc/guacamole
+      cat <<EOF >/etc/guacamole/guacd.conf
+[server]
+bind_host = 127.0.0.1
+bind_port = 4822
+EOF
+    fi
+
+    if [[ ! -f /etc/systemd/system/guacd.service ]] || grep -q "Type=forking" /etc/systemd/system/guacd.service 2>/dev/null; then
+      cat <<EOF >/etc/systemd/system/guacd.service
+[Unit]
+Description=Guacamole Proxy Daemon (guacd)
+After=network.target
+
+[Service]
+Type=simple
+ExecStart=/usr/local/sbin/guacd -f -b 127.0.0.1 -l 4822
+Restart=on-failure
+RestartSec=5
+
+[Install]
+WantedBy=multi-user.target
+EOF
+    fi
+
+    if ! grep -q "guacd.service" /etc/systemd/system/termix.service 2>/dev/null; then
+      sed -i '/^After=network.target/s/$/ guacd.service/' /etc/systemd/system/termix.service
+      sed -i '/^\[Unit\]/a Wants=guacd.service' /etc/systemd/system/termix.service
+    fi
+
+    systemctl daemon-reload
+    systemctl enable -q --now guacd
+  fi
+
   if check_for_gh_release "termix" "Termix-SSH/Termix"; then
-    msg_info "Stopping Service"
+    msg_info "Stopping Termix"
     systemctl stop termix
-    msg_ok "Stopped Service"
+    msg_ok "Stopped Termix"
+
+    msg_info "Migrating Configuration"
+    if [[ ! -f /opt/termix/.env ]]; then
+      cat <<EOF >/opt/termix/.env
+NODE_ENV=production
+DATA_DIR=/opt/termix/data
+GUACD_HOST=127.0.0.1
+GUACD_PORT=4822
+EOF
+    fi
+    if ! grep -q "EnvironmentFile" /etc/systemd/system/termix.service 2>/dev/null; then
+      cat <<EOF >/etc/systemd/system/termix.service
+[Unit]
+Description=Termix Backend
+After=network.target guacd.service
+Wants=guacd.service
+
+[Service]
+Type=simple
+User=root
+WorkingDirectory=/opt/termix
+EnvironmentFile=/opt/termix/.env
+ExecStart=/usr/bin/node /opt/termix/dist/backend/backend/starter.js
+Restart=on-failure
+RestartSec=5
+
+[Install]
+WantedBy=multi-user.target
+EOF
+      systemctl daemon-reload
+    fi
+    msg_ok "Migrated Configuration"
 
     msg_info "Backing up Data"
     cp -r /opt/termix/data /opt/termix_data_backup
@@ -95,16 +201,16 @@ function update_script() {
       sed -i 's|/app/html|/opt/termix/html|g' /etc/nginx/nginx.conf
       sed -i 's|/app/nginx|/opt/termix/nginx|g' /etc/nginx/nginx.conf
       sed -i 's|listen ${PORT};|listen 80;|g' /etc/nginx/nginx.conf
-      
+
       nginx -t && systemctl reload nginx
       msg_ok "Updated Nginx Configuration"
     else
       msg_warn "Nginx configuration not updated. If Termix doesn't work, restore from backup or update manually."
     fi
 
-    msg_info "Starting Service"
+    msg_info "Starting Termix"
     systemctl start termix
-    msg_ok "Started Service"
+    msg_ok "Started Termix"
     msg_ok "Updated successfully!"
   fi
   exit

install/alpine-ntfy-install.sh

@@ -0,0 +1,25 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2021-2026 community-scripts ORG
+# Author: cobalt (cobaltgit)
+# License: MIT | https://github.com/community-scripts/ProxmoxVED/raw/main/LICENSE
+# Source: https://ntfy.sh/
+
+source /dev/stdin <<<"$FUNCTIONS_FILE_PATH"
+color
+verb_ip6
+catch_errors
+setting_up_container
+network_check
+update_os
+
+msg_info "Installing ntfy"
+$STD apk add --no-cache ntfy ntfy-openrc libcap
+sed -i '/^listen-http/s/^\(.*\)$/#\1\n/' /etc/ntfy/server.yml
+setcap 'cap_net_bind_service=+ep' /usr/bin/ntfy
+$STD rc-update add ntfy default
+$STD service ntfy start
+msg_ok "Installed ntfy"
+
+motd_ssh
+customize

install/anytype-server-install.sh

@@ -0,0 +1,81 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2021-2026 community-scripts ORG
+# Author: MickLesk (CanbiZ)
+# License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
+# Source: https://anytype.io
+
+source /dev/stdin <<<"$FUNCTIONS_FILE_PATH"
+color
+verb_ip6
+catch_errors
+setting_up_container
+network_check
+update_os
+
+setup_mongodb
+
+msg_info "Configuring MongoDB Replica Set"
+cat <<EOF >>/etc/mongod.conf
+
+replication:
+  replSetName: "rs0"
+EOF
+systemctl restart mongod
+sleep 3
+$STD mongosh --eval 'rs.initiate({_id: "rs0", members: [{_id: 0, host: "127.0.0.1:27017"}]})'
+msg_ok "Configured MongoDB Replica Set"
+
+msg_info "Installing Redis Stack"
+setup_deb822_repo \
+  "redis-stack" \
+  "https://packages.redis.io/gpg" \
+  "https://packages.redis.io/deb" \
+  "jammy" \
+  "main"
+$STD apt install -y redis-stack-server
+systemctl enable -q --now redis-stack-server
+msg_ok "Installed Redis Stack"
+
+fetch_and_deploy_gh_release "anytype" "grishy/any-sync-bundle" "prebuild" "latest" "/opt/anytype" "any-sync-bundle_*_linux_amd64.tar.gz"
+chmod +x /opt/anytype/any-sync-bundle
+
+msg_info "Configuring Anytype"
+mkdir -p /opt/anytype/data/storage
+cat <<EOF >/opt/anytype/.env
+ANY_SYNC_BUNDLE_CONFIG=/opt/anytype/data/bundle-config.yml
+ANY_SYNC_BUNDLE_CLIENT_CONFIG=/opt/anytype/data/client-config.yml
+ANY_SYNC_BUNDLE_INIT_STORAGE=/opt/anytype/data/storage/
+ANY_SYNC_BUNDLE_INIT_EXTERNAL_ADDRS=${LOCAL_IP}
+ANY_SYNC_BUNDLE_INIT_MONGO_URI=mongodb://127.0.0.1:27017/
+ANY_SYNC_BUNDLE_INIT_REDIS_URI=redis://127.0.0.1:6379/
+ANY_SYNC_BUNDLE_LOG_LEVEL=info
+EOF
+msg_ok "Configured Anytype"
+
+msg_info "Creating Service"
+cat <<EOF >/etc/systemd/system/anytype.service
+[Unit]
+Description=Anytype Sync Server (any-sync-bundle)
+After=network-online.target mongod.service redis-stack-server.service
+Wants=network-online.target
+Requires=mongod.service redis-stack-server.service
+
+[Service]
+Type=simple
+User=root
+WorkingDirectory=/opt/anytype
+EnvironmentFile=/opt/anytype/.env
+ExecStart=/opt/anytype/any-sync-bundle start-bundle
+Restart=on-failure
+RestartSec=10
+
+[Install]
+WantedBy=multi-user.target
+EOF
+systemctl enable -q --now anytype
+msg_ok "Created Service"
+
+motd_ssh
+customize
+cleanup_lxc

install/channels-install.sh

@@ -35,7 +35,6 @@ setup_hwaccel
 msg_info "Installing Channels DVR Server (Patience)"
 cd /opt
 $STD bash <(curl -fsSL https://getchannels.com/dvr/setup.sh)
-sed -i -e 's/^sgx:x:104:$/render:x:104:root/' -e 's/^render:x:106:root$/sgx:x:106:/' /etc/group
 msg_ok "Installed Channels DVR Server"
 
 motd_ssh

install/emby-install.sh

@@ -13,17 +13,9 @@ setting_up_container
 network_check
 update_os
 
-setup_hwaccel
-
 fetch_and_deploy_gh_release "emby" "MediaBrowser/Emby.Releases" "binary"
 
-msg_info "Configuring Emby"
-if [[ "$CTTYPE" == "0" ]]; then
-  sed -i -e 's/^ssl-cert:x:104:$/render:x:104:root,emby/' -e 's/^render:x:108:root,emby$/ssl-cert:x:108:/' /etc/group
-else
-  sed -i -e 's/^ssl-cert:x:104:$/render:x:104:emby/' -e 's/^render:x:108:emby$/ssl-cert:x:108:/' /etc/group
-fi
-msg_ok "Configured Emby"
+setup_hwaccel "emby"
 
 motd_ssh
 customize

install/frigate-install.sh

@@ -146,7 +146,7 @@ ldconfig
 msg_ok "Built libUSB"
 
 msg_info "Bootstrapping pip"
-wget -q https://bootstrap.pypa.io/get-pip.py -O /tmp/get-pip.py
+curl_with_retry "https://bootstrap.pypa.io/get-pip.py" "/tmp/get-pip.py"
 sed -i 's/args.append("setuptools")/args.append("setuptools==77.0.3")/' /tmp/get-pip.py
 $STD python3 /tmp/get-pip.py "pip"
 rm -f /tmp/get-pip.py
@@ -169,13 +169,13 @@ NODE_VERSION="20" setup_nodejs
 
 msg_info "Downloading Inference Models"
 mkdir -p /models /openvino-model
-wget -q -O /edgetpu_model.tflite https://github.com/google-coral/test_data/raw/release-frogfish/ssdlite_mobiledet_coco_qat_postprocess_edgetpu.tflite
-wget -q -O /models/cpu_model.tflite https://github.com/google-coral/test_data/raw/release-frogfish/ssdlite_mobiledet_coco_qat_postprocess.tflite
+curl_with_retry "https://github.com/google-coral/test_data/raw/release-frogfish/ssdlite_mobiledet_coco_qat_postprocess_edgetpu.tflite" "/edgetpu_model.tflite"
+curl_with_retry "https://github.com/google-coral/test_data/raw/release-frogfish/ssdlite_mobiledet_coco_qat_postprocess.tflite" "/models/cpu_model.tflite"
 cp /opt/frigate/labelmap.txt /labelmap.txt
 msg_ok "Downloaded Inference Models"
 
 msg_info "Downloading Audio Model"
-wget -q -O /tmp/yamnet.tar.gz https://www.kaggle.com/api/v1/models/google/yamnet/tfLite/classification-tflite/1/download
+curl_with_retry "https://www.kaggle.com/api/v1/models/google/yamnet/tfLite/classification-tflite/1/download" "/tmp/yamnet.tar.gz"
 $STD tar xzf /tmp/yamnet.tar.gz -C /
 mv /1.tflite /cpu_audio_model.tflite
 cp /opt/frigate/audio-labelmap.txt /audio-labelmap.txt
@@ -205,7 +205,7 @@ msg_ok "Installed OpenVino"
 
 msg_info "Building OpenVino Model"
 cd /models
-wget -q http://download.tensorflow.org/models/object_detection/ssdlite_mobilenet_v2_coco_2018_05_09.tar.gz
+curl_with_retry "http://download.tensorflow.org/models/object_detection/ssdlite_mobilenet_v2_coco_2018_05_09.tar.gz" "ssdlite_mobilenet_v2_coco_2018_05_09.tar.gz"
 $STD tar -zxf ssdlite_mobilenet_v2_coco_2018_05_09.tar.gz --no-same-owner
 if python3 /opt/frigate/docker/main/build_ov_model.py &>/dev/null; then
   mkdir -p /openvino-model
@@ -219,7 +219,7 @@ if python3 /opt/frigate/docker/main/build_ov_model.py &>/dev/null; then
     if [[ -n "$OV_LABELS" ]]; then
       ln -sf "$OV_LABELS" /openvino-model/coco_91cl_bkgr.txt
     else
-      wget -q "https://raw.githubusercontent.com/openvinotoolkit/open_model_zoo/master/data/dataset_classes/coco_91cl_bkgr.txt" -O /openvino-model/coco_91cl_bkgr.txt
+      curl_with_retry "https://raw.githubusercontent.com/openvinotoolkit/open_model_zoo/master/data/dataset_classes/coco_91cl_bkgr.txt" "/openvino-model/coco_91cl_bkgr.txt"
     fi
   fi
   sed -i 's/truck/car/g' /openvino-model/coco_91cl_bkgr.txt
@@ -246,7 +246,7 @@ msg_info "Configuring Frigate"
 mkdir -p /config /media/frigate
 cp -r /opt/frigate/config/. /config
 
-curl -fsSL "https://github.com/intel-iot-devkit/sample-videos/raw/master/person-bicycle-car-detection.mp4" -o "/media/frigate/person-bicycle-car-detection.mp4"
+curl_with_retry "https://github.com/intel-iot-devkit/sample-videos/raw/master/person-bicycle-car-detection.mp4" "/media/frigate/person-bicycle-car-detection.mp4"
 
 echo "tmpfs   /tmp/cache      tmpfs   defaults        0       0" >>/etc/fstab
 
@@ -289,7 +289,7 @@ detect:
   enabled: false
 EOF
 
-if grep -q -o -m1 -E 'avx[^ ]*|sse4_2' /proc/cpuinfo; then
+if grep -q -o -m1 -E 'avx[^ ]*|sse4_2' /proc/cpuinfo && [[ -f /openvino-model/ssdlite_mobilenet_v2.xml ]] && [[ -f /openvino-model/coco_91cl_bkgr.txt ]]; then
   cat <<EOF >>/config/config.yml
 ffmpeg:
   hwaccel_args: auto

install/gluetun-install.sh

@@ -0,0 +1,96 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2021-2026 community-scripts ORG
+# Author: MickLesk (CanbiZ)
+# License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
+# Source: https://github.com/qdm12/gluetun
+
+source /dev/stdin <<<"$FUNCTIONS_FILE_PATH"
+color
+verb_ip6
+catch_errors
+setting_up_container
+network_check
+update_os
+
+msg_info "Installing Dependencies"
+$STD apt install -y \
+  openvpn \
+  wireguard-tools \
+  iptables
+msg_ok "Installed Dependencies"
+
+msg_info "Configuring iptables"
+$STD update-alternatives --set iptables /usr/sbin/iptables-legacy
+$STD update-alternatives --set ip6tables /usr/sbin/ip6tables-legacy
+ln -sf /usr/sbin/openvpn /usr/sbin/openvpn2.6
+msg_ok "Configured iptables"
+
+setup_go
+
+fetch_and_deploy_gh_release "gluetun" "qdm12/gluetun" "tarball"
+
+msg_info "Building Gluetun"
+cd /opt/gluetun
+$STD go mod download
+CGO_ENABLED=0 $STD go build -trimpath -ldflags="-s -w" -o /usr/local/bin/gluetun ./cmd/gluetun/
+msg_ok "Built Gluetun"
+
+msg_info "Configuring Gluetun"
+mkdir -p /opt/gluetun-data
+touch /etc/alpine-release
+ln -sf /opt/gluetun-data /gluetun
+cat <<EOF >/opt/gluetun-data/.env
+VPN_SERVICE_PROVIDER=custom
+VPN_TYPE=openvpn
+OPENVPN_CUSTOM_CONFIG=/opt/gluetun-data/custom.ovpn
+OPENVPN_USER=
+OPENVPN_PASSWORD=
+OPENVPN_PROCESS_USER=root
+PUID=0
+PGID=0
+HTTP_CONTROL_SERVER_ADDRESS=:8000
+HTTPPROXY=off
+SHADOWSOCKS=off
+PPROF_ENABLED=no
+PPROF_BLOCK_PROFILE_RATE=0
+PPROF_MUTEX_PROFILE_RATE=0
+PPROF_HTTP_SERVER_ADDRESS=:6060
+FIREWALL_ENABLED_DISABLING_IT_SHOOTS_YOU_IN_YOUR_FOOT=on
+HEALTH_SERVER_ADDRESS=127.0.0.1:9999
+DNS_UPSTREAM_RESOLVERS=cloudflare
+LOG_LEVEL=info
+STORAGE_FILEPATH=/gluetun/servers.json
+PUBLICIP_FILE=/gluetun/ip
+VPN_PORT_FORWARDING_STATUS_FILE=/gluetun/forwarded_port
+TZ=UTC
+EOF
+msg_ok "Configured Gluetun"
+
+msg_info "Creating Service"
+cat <<EOF >/etc/systemd/system/gluetun.service
+[Unit]
+Description=Gluetun VPN Client
+After=network.target
+
+[Service]
+Type=simple
+User=root
+WorkingDirectory=/opt/gluetun-data
+EnvironmentFile=/opt/gluetun-data/.env
+UnsetEnvironment=USER
+ExecStartPre=/bin/sh -c 'rm -f /etc/openvpn/target.ovpn'
+ExecStart=/usr/local/bin/gluetun
+Restart=on-failure
+RestartSec=5
+AmbientCapabilities=CAP_NET_ADMIN
+
+[Install]
+WantedBy=multi-user.target
+EOF
+systemctl enable -q --now gluetun
+msg_ok "Created Service"
+
+motd_ssh
+customize
+cleanup_lxc

install/immich-install.sh

@@ -32,13 +32,13 @@ if [ -d /dev/dri ]; then
     $STD apt install -y --no-install-recommends patchelf
     tmp_dir=$(mktemp -d)
     $STD pushd "$tmp_dir"
-    curl -fsSLO https://raw.githubusercontent.com/immich-app/immich/refs/heads/main/machine-learning/Dockerfile
+    curl_with_retry "https://raw.githubusercontent.com/immich-app/immich/refs/heads/main/machine-learning/Dockerfile" "Dockerfile"
     readarray -t INTEL_URLS < <(
       sed -n "/intel-[igc|opencl]/p" ./Dockerfile | awk '{print $3}'
       sed -n "/libigdgmm12/p" ./Dockerfile | awk '{print $3}'
     )
     for url in "${INTEL_URLS[@]}"; do
-      curl -fsSLO "$url"
+      curl_with_retry "$url" "$(basename "$url")"
     done
     $STD apt install -y ./libigdgmm12*.deb
     rm ./libigdgmm12*.deb
@@ -154,6 +154,10 @@ sed -i "s/^#shared_preload.*/shared_preload_libraries = 'vchord.so'/" /etc/postg
 systemctl restart postgresql.service
 PG_DB_NAME="immich" PG_DB_USER="immich" PG_DB_GRANT_SUPERUSER="true" PG_DB_SKIP_ALTER_ROLE="true" setup_postgresql_db
 
+msg_info "Installing GCC-13 (available as fallback compiler)"
+$STD apt install -y gcc-13 g++-13
+msg_ok "Installed GCC-13"
+
 msg_warn "Compiling Custom Photo-processing Libraries (can take anywhere from 15min to 2h)"
 LD_LIBRARY_PATH=/usr/local/lib
 export LD_RUN_PATH=/usr/local/lib
@@ -290,7 +294,7 @@ GEO_DIR="${INSTALL_DIR}/geodata"
 mkdir -p {"${APP_DIR}","${UPLOAD_DIR}","${GEO_DIR}","${INSTALL_DIR}"/cache}
 
 fetch_and_deploy_gh_release "Immich" "immich-app/immich" "tarball" "v2.5.6" "$SRC_DIR"
-PNPM_VERSION="$(jq -r '.packageManager | split("@")[1]' ${SRC_DIR}/package.json)"
+PNPM_VERSION="$(jq -r '.packageManager | split("@")[1] | split("+")[0]' ${SRC_DIR}/package.json)"
 NODE_VERSION="24" NODE_MODULE="pnpm@${PNPM_VERSION}" setup_nodejs
 
 msg_info "Installing Immich (patience)"
@@ -340,15 +344,36 @@ cd "$SRC_DIR"/machine-learning
 $STD useradd -U -s /usr/sbin/nologin -r -M -d "$INSTALL_DIR" immich
 mkdir -p "$ML_DIR" && chown -R immich:immich "$INSTALL_DIR"
 export VIRTUAL_ENV="${ML_DIR}/ml-venv"
+export UV_HTTP_TIMEOUT=300
 if [[ -f ~/.openvino ]]; then
+  ML_PYTHON="python3.13"
+  msg_info "Pre-installing Python ${ML_PYTHON} for machine-learning"
+  for attempt in $(seq 1 3); do
+    $STD sudo --preserve-env=VIRTUAL_ENV -nu immich uv python install "${ML_PYTHON}" && break
+    [[ $attempt -lt 3 ]] && msg_warn "Python download attempt $attempt failed, retrying..." && sleep 5
+  done
+  msg_ok "Pre-installed Python ${ML_PYTHON}"
   msg_info "Installing HW-accelerated machine-learning"
-  $STD uv add --no-sync --optional openvino onnxruntime-openvino==1.24.1 --active -n -p python3.13 --managed-python
-  $STD sudo --preserve-env=VIRTUAL_ENV -nu immich uv sync --extra openvino --no-dev --active --link-mode copy -n -p python3.13 --managed-python
+  $STD uv add --no-sync --optional openvino onnxruntime-openvino==1.24.1 --active -n -p "${ML_PYTHON}" --managed-python
+  for attempt in $(seq 1 3); do
+    $STD sudo --preserve-env=VIRTUAL_ENV,UV_HTTP_TIMEOUT -nu immich uv sync --extra openvino --no-dev --active --link-mode copy -n -p "${ML_PYTHON}" --managed-python && break
+    [[ $attempt -lt 3 ]] && msg_warn "uv sync attempt $attempt failed, retrying..." && sleep 10
+  done
   patchelf --clear-execstack "${VIRTUAL_ENV}/lib/python3.13/site-packages/onnxruntime/capi/onnxruntime_pybind11_state.cpython-313-x86_64-linux-gnu.so"
   msg_ok "Installed HW-accelerated machine-learning"
 else
+  ML_PYTHON="python3.11"
+  msg_info "Pre-installing Python ${ML_PYTHON} for machine-learning"
+  for attempt in $(seq 1 3); do
+    $STD sudo --preserve-env=VIRTUAL_ENV -nu immich uv python install "${ML_PYTHON}" && break
+    [[ $attempt -lt 3 ]] && msg_warn "Python download attempt $attempt failed, retrying..." && sleep 5
+  done
+  msg_ok "Pre-installed Python ${ML_PYTHON}"
   msg_info "Installing machine-learning"
-  $STD sudo --preserve-env=VIRTUAL_ENV -nu immich uv sync --extra cpu --no-dev --active --link-mode copy -n -p python3.11 --managed-python
+  for attempt in $(seq 1 3); do
+    $STD sudo --preserve-env=VIRTUAL_ENV,UV_HTTP_TIMEOUT -nu immich uv sync --extra cpu --no-dev --active --link-mode copy -n -p "${ML_PYTHON}" --managed-python && break
+    [[ $attempt -lt 3 ]] && msg_warn "uv sync attempt $attempt failed, retrying..." && sleep 10
+  done
   msg_ok "Installed machine-learning"
 fi
 cd "$SRC_DIR"
@@ -365,10 +390,10 @@ ln -s "$UPLOAD_DIR" "$ML_DIR"/upload
 
 msg_info "Installing GeoNames data"
 cd "$GEO_DIR"
-curl -fsSLZ -O "https://download.geonames.org/export/dump/admin1CodesASCII.txt" \
-  -O "https://download.geonames.org/export/dump/admin2Codes.txt" \
-  -O "https://download.geonames.org/export/dump/cities500.zip" \
-  -O "https://raw.githubusercontent.com/nvkelso/natural-earth-vector/v5.1.2/geojson/ne_10m_admin_0_countries.geojson"
+curl_with_retry "https://download.geonames.org/export/dump/admin1CodesASCII.txt" "admin1CodesASCII.txt"
+curl_with_retry "https://download.geonames.org/export/dump/admin2Codes.txt" "admin2Codes.txt"
+curl_with_retry "https://download.geonames.org/export/dump/cities500.zip" "cities500.zip"
+curl_with_retry "https://raw.githubusercontent.com/nvkelso/natural-earth-vector/v5.1.2/geojson/ne_10m_admin_0_countries.geojson" "ne_10m_admin_0_countries.geojson"
 unzip -q cities500.zip
 date --iso-8601=seconds | tr -d "\n" >geodata-date.txt
 rm cities500.zip

install/jellyfin-install.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
-# Copyright (c) 2021-2026 tteck
-# Author: tteck (tteckster)
+# Copyright (c) 2021-2026 community-scripts ORG
+# Author: MickLesk (CanbiZ)
 # License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 # Source: https://jellyfin.org/
 
@@ -14,31 +14,31 @@ network_check
 update_os
 
 msg_custom "ℹ️" "${GN}" "If NVIDIA GPU passthrough is detected, you'll be asked whether to install drivers in the container"
-setup_hwaccel
 
-msg_info "Installing Jellyfin"
-VERSION="$(awk -F'=' '/^VERSION_CODENAME=/{ print $NF }' /etc/os-release)"
-if ! dpkg -s libjemalloc2 >/dev/null 2>&1; then
-  $STD apt install -y libjemalloc2
-fi
+msg_info "Installing Dependencies"
+ensure_dependencies libjemalloc2
 if [[ ! -f /usr/lib/libjemalloc.so ]]; then
   ln -sf /usr/lib/x86_64-linux-gnu/libjemalloc.so.2 /usr/lib/libjemalloc.so
 fi
-if [[ ! -d /etc/apt/keyrings ]]; then
-  mkdir -p /etc/apt/keyrings
-fi
-curl -fsSL https://repo.jellyfin.org/jellyfin_team.gpg.key | gpg --dearmor --yes --output /etc/apt/keyrings/jellyfin.gpg
-cat <<EOF >/etc/apt/sources.list.d/jellyfin.sources
-Types: deb
-URIs: https://repo.jellyfin.org/${PCT_OSTYPE}
-Suites: ${VERSION}
-Components: main
-Architectures: amd64
-Signed-By: /etc/apt/keyrings/jellyfin.gpg
-EOF
+msg_ok "Installed Dependencies"
 
-$STD apt update
-$STD apt install -y jellyfin
+msg_info "Setting up Jellyfin Repository"
+setup_deb822_repo \
+  "jellyfin" \
+  "https://repo.jellyfin.org/jellyfin_team.gpg.key" \
+  "https://repo.jellyfin.org/$(get_os_info id)" \
+  "$(get_os_info codename)"
+msg_ok "Set up Jellyfin Repository"
+
+msg_info "Installing Jellyfin"
+$STD apt install -y jellyfin jellyfin-ffmpeg7
+ln -sf /usr/lib/jellyfin-ffmpeg/ffmpeg /usr/bin/ffmpeg
+ln -sf /usr/lib/jellyfin-ffmpeg/ffprobe /usr/bin/ffprobe
+msg_ok "Installed Jellyfin"
+
+setup_hwaccel "jellyfin"
+
+msg_info "Configuring Jellyfin"
 # Configure log rotation to prevent disk fill (keeps fail2ban compatibility) (PR: #1690 / Issue: #11224)
 cat <<EOF >/etc/logrotate.d/jellyfin
 /var/log/jellyfin/*.log {
@@ -55,12 +55,7 @@ EOF
 chown -R jellyfin:adm /etc/jellyfin
 sleep 10
 systemctl restart jellyfin
-if [[ "$CTTYPE" == "0" ]]; then
-  sed -i -e 's/^ssl-cert:x:104:$/render:x:104:root,jellyfin/' -e 's/^render:x:108:root,jellyfin$/ssl-cert:x:108:/' /etc/group
-else
-  sed -i -e 's/^ssl-cert:x:104:$/render:x:104:jellyfin/' -e 's/^render:x:108:jellyfin$/ssl-cert:x:108:/' /etc/group
-fi
-msg_ok "Installed Jellyfin"
+msg_ok "Configured Jellyfin"
 
 motd_ssh
 customize

install/ollama-install.sh

@@ -42,8 +42,6 @@ EOF
 $STD apt update
 msg_ok "Set up Intel® Repositories"
 
-setup_hwaccel
-
 msg_info "Installing Intel® Level Zero"
 # Debian 13+ has newer Level Zero packages in system repos that conflict with Intel repo packages
 if is_debian && [[ "$(get_os_version_major)" -ge 13 ]]; then
@@ -89,11 +87,11 @@ msg_info "Creating ollama User and Group"
 if ! id ollama >/dev/null 2>&1; then
   useradd -r -s /usr/sbin/nologin -U -m -d /usr/share/ollama ollama
 fi
-$STD usermod -aG render ollama || true
-$STD usermod -aG video ollama || true
 $STD usermod -aG ollama $(id -u -n)
 msg_ok "Created ollama User and adjusted Groups"
 
+setup_hwaccel "ollama"
+
 msg_info "Creating Service"
 cat <<EOF >/etc/systemd/system/ollama.service
 [Unit]

install/plex-install.sh

@@ -13,8 +13,6 @@ setting_up_container
 network_check
 update_os
 
-setup_hwaccel
-
 msg_info "Setting Up Plex Media Server Repository"
 setup_deb822_repo \
   "plexmediaserver" \
@@ -26,13 +24,10 @@ msg_ok "Set Up Plex Media Server Repository"
 
 msg_info "Installing Plex Media Server"
 $STD apt install -y plexmediaserver
-if [[ "$CTTYPE" == "0" ]]; then
-  sed -i -e 's/^ssl-cert:x:104:plex$/render:x:104:root,plex/' -e 's/^render:x:108:root$/ssl-cert:x:108:plex/' /etc/group
-else
-  sed -i -e 's/^ssl-cert:x:104:plex$/render:x:104:plex/' -e 's/^render:x:108:$/ssl-cert:x:108:/' /etc/group
-fi
 msg_ok "Installed Plex Media Server"
 
+setup_hwaccel "plex"
+
 motd_ssh
 customize
 cleanup_lxc

install/podman-homeassistant-install.sh

@@ -45,32 +45,58 @@ systemctl enable -q --now podman.socket
 echo -e 'unqualified-search-registries=["docker.io"]' >>/etc/containers/registries.conf
 msg_ok "Installed Podman"
 
+mkdir -p /etc/containers/systemd
+
 read -r -p "${TAB3}Would you like to add Portainer? <y/N> " prompt
 if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
   msg_info "Installing Portainer $PORTAINER_LATEST_VERSION"
   podman volume create portainer_data >/dev/null
-  $STD podman run -d \
-    -p 8000:8000 \
-    -p 9443:9443 \
-    --name=portainer \
-    --restart=always \
-    -v /run/podman/podman.sock:/var/run/docker.sock \
-    -v portainer_data:/data \
-    portainer/portainer-ce:latest
+  cat <<EOF >/etc/containers/systemd/portainer.container
+[Unit]
+Description=Portainer Container
+After=network-online.target
+
+[Container]
+Image=docker.io/portainer/portainer-ce:latest
+ContainerName=portainer
+PublishPort=8000:8000
+PublishPort=9443:9443
+Volume=/run/podman/podman.sock:/var/run/docker.sock
+Volume=portainer_data:/data
+
+[Service]
+Restart=always
+
+[Install]
+WantedBy=default.target multi-user.target
+EOF
+  systemctl daemon-reload
+  $STD systemctl start portainer
   msg_ok "Installed Portainer $PORTAINER_LATEST_VERSION"
 else
   read -r -p "${TAB3}Would you like to add the Portainer Agent? <y/N> " prompt
   if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
     msg_info "Installing Portainer agent $PORTAINER_AGENT_LATEST_VERSION"
-    podman volume create temp >/dev/null
-    podman volume remove temp >/dev/null
-    $STD podman run -d \
-      -p 9001:9001 \
-      --name portainer_agent \
-      --restart=always \
-      -v /run/podman/podman.sock:/var/run/docker.sock \
-      -v /var/lib/containers/storage/volumes:/var/lib/docker/volumes \
-      portainer/agent
+    cat <<EOF >/etc/containers/systemd/portainer-agent.container
+[Unit]
+Description=Portainer Agent Container
+After=network-online.target
+
+[Container]
+Image=docker.io/portainer/agent:latest
+ContainerName=portainer_agent
+PublishPort=9001:9001
+Volume=/run/podman/podman.sock:/var/run/docker.sock
+Volume=/var/lib/containers/storage/volumes:/var/lib/docker/volumes
+
+[Service]
+Restart=always
+
+[Install]
+WantedBy=default.target multi-user.target
+EOF
+    systemctl daemon-reload
+    $STD systemctl start portainer-agent
     msg_ok "Installed Portainer Agent $PORTAINER_AGENT_LATEST_VERSION"
   fi
 fi
@@ -81,19 +107,29 @@ msg_ok "Pulled Home Assistant Image"
 
 msg_info "Installing Home Assistant"
 $STD podman volume create hass_config
-$STD podman run -d \
-  --name homeassistant \
-  --restart unless-stopped \
-  -v /dev:/dev \
-  -v hass_config:/config \
-  -v /etc/localtime:/etc/localtime:ro \
-  -v /etc/timezone:/etc/timezone:ro \
-  --net=host \
-  homeassistant/home-assistant:stable
-podman generate systemd \
-  --new --name homeassistant \
-  >/etc/systemd/system/homeassistant.service
-systemctl enable -q --now homeassistant
+cat <<EOF >/etc/containers/systemd/homeassistant.container
+[Unit]
+Description=Home Assistant Container
+After=network-online.target
+
+[Container]
+Image=docker.io/homeassistant/home-assistant:stable
+ContainerName=homeassistant
+Volume=/dev:/dev
+Volume=hass_config:/config
+Volume=/etc/localtime:/etc/localtime:ro
+Volume=/etc/timezone:/etc/timezone:ro
+Network=host
+
+[Service]
+Restart=always
+TimeoutStartSec=300
+
+[Install]
+WantedBy=default.target multi-user.target
+EOF
+systemctl daemon-reload
+$STD systemctl start homeassistant
 msg_ok "Installed Home Assistant"
 
 motd_ssh

install/podman-install.sh

@@ -45,32 +45,58 @@ systemctl enable -q --now podman.socket
 echo -e 'unqualified-search-registries=["docker.io"]' >>/etc/containers/registries.conf
 msg_ok "Installed Podman"
 
+mkdir -p /etc/containers/systemd
+
 read -r -p "${TAB3}Would you like to add Portainer? <y/N> " prompt
 if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
   msg_info "Installing Portainer $PORTAINER_LATEST_VERSION"
   podman volume create portainer_data >/dev/null
-  $STD podman run -d \
-    -p 8000:8000 \
-    -p 9443:9443 \
-    --name=portainer \
-    --restart=always \
-    -v /run/podman/podman.sock:/var/run/docker.sock \
-    -v portainer_data:/data \
-    portainer/portainer-ce:latest
+  cat <<EOF >/etc/containers/systemd/portainer.container
+[Unit]
+Description=Portainer Container
+After=network-online.target
+
+[Container]
+Image=docker.io/portainer/portainer-ce:latest
+ContainerName=portainer
+PublishPort=8000:8000
+PublishPort=9443:9443
+Volume=/run/podman/podman.sock:/var/run/docker.sock
+Volume=portainer_data:/data
+
+[Service]
+Restart=always
+
+[Install]
+WantedBy=default.target multi-user.target
+EOF
+  systemctl daemon-reload
+  $STD systemctl start portainer
   msg_ok "Installed Portainer $PORTAINER_LATEST_VERSION"
 else
   read -r -p "${TAB3}Would you like to add the Portainer Agent? <y/N> " prompt
   if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
     msg_info "Installing Portainer agent $PORTAINER_AGENT_LATEST_VERSION"
-    podman volume create temp >/dev/null
-    podman volume remove temp >/dev/null
-    $STD podman run -d \
-      -p 9001:9001 \
-      --name portainer_agent \
-      --restart=always \
-      -v /run/podman/podman.sock:/var/run/docker.sock \
-      -v /var/lib/containers/storage/volumes:/var/lib/docker/volumes \
-      portainer/agent
+    cat <<EOF >/etc/containers/systemd/portainer-agent.container
+[Unit]
+Description=Portainer Agent Container
+After=network-online.target
+
+[Container]
+Image=docker.io/portainer/agent:latest
+ContainerName=portainer_agent
+PublishPort=9001:9001
+Volume=/run/podman/podman.sock:/var/run/docker.sock
+Volume=/var/lib/containers/storage/volumes:/var/lib/docker/volumes
+
+[Service]
+Restart=always
+
+[Install]
+WantedBy=default.target multi-user.target
+EOF
+    systemctl daemon-reload
+    $STD systemctl start portainer-agent
     msg_ok "Installed Portainer Agent $PORTAINER_AGENT_LATEST_VERSION"
   fi
 fi

install/reitti-install.sh

@@ -44,7 +44,7 @@ msg_ok "Configured RabbitMQ"
 
 USE_ORIGINAL_FILENAME="true" fetch_and_deploy_gh_release "reitti" "dedicatedcode/reitti" "singlefile" "latest" "/opt/reitti" "reitti-app.jar"
 mv /opt/reitti/reitti-*.jar /opt/reitti/reitti.jar
-USE_ORIGINAL_FILENAME="true" fetch_and_deploy_gh_release "photon" "komoot/photon" "singlefile" "latest" "/opt/photon" "photon-0*.jar"
+USE_ORIGINAL_FILENAME="true" fetch_and_deploy_gh_release "photon" "komoot/photon" "singlefile" "latest" "/opt/photon" "photon-*.jar"
 mv /opt/photon/photon-*.jar /opt/photon/photon.jar
 
 msg_info "Installing Nginx Tile Cache"

install/sparkyfitness-install.sh

@@ -47,7 +47,7 @@ msg_ok "Configured Sparky Fitness"
 
 msg_info "Building Backend"
 cd /opt/sparkyfitness/SparkyFitnessServer
-$STD npm install --legacy-peer-deps
+$STD pnpm install
 msg_ok "Built Backend"
 
 msg_info "Building Frontend (Patience)"

install/split-pro-install.sh

@@ -0,0 +1,74 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2021-2026 community-scripts ORG
+# Author: johanngrobe
+# License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
+# Source: https://github.com/oss-apps/split-pro
+
+source /dev/stdin <<<"$FUNCTIONS_FILE_PATH"
+color
+verb_ip6
+catch_errors
+setting_up_container
+network_check
+update_os
+
+NODE_VERSION="22" NODE_MODULE="pnpm" setup_nodejs
+PG_VERSION="17" PG_MODULES="cron" setup_postgresql
+
+msg_info "Installing Dependencies"
+$STD apt install -y openssl
+msg_ok "Installed Dependencies"
+
+PG_DB_NAME="splitpro" PG_DB_USER="splitpro" PG_DB_EXTENSIONS="pg_cron" setup_postgresql_db
+fetch_and_deploy_gh_release "split-pro" "oss-apps/split-pro" "tarball"
+
+msg_info "Installing Dependencies"
+cd /opt/split-pro
+$STD pnpm install --frozen-lockfile
+msg_ok "Installed Dependencies"
+
+msg_info "Building Split Pro"
+cd /opt/split-pro
+mkdir -p /opt/split-pro_data/uploads
+ln -sf /opt/split-pro_data/uploads /opt/split-pro/uploads
+NEXTAUTH_SECRET=$(openssl rand -base64 32)
+cp .env.example .env
+sed -i "s|^DATABASE_URL=.*|DATABASE_URL=\"postgresql://${PG_DB_USER}:${PG_DB_PASS}@localhost:5432/${PG_DB_NAME}\"|" .env
+sed -i "s|^NEXTAUTH_SECRET=.*|NEXTAUTH_SECRET=\"${NEXTAUTH_SECRET}\"|" .env
+sed -i "s|^NEXTAUTH_URL=.*|NEXTAUTH_URL=\"http://${LOCAL_IP}:3000\"|" .env
+sed -i "s|^NEXTAUTH_URL_INTERNAL=.*|NEXTAUTH_URL_INTERNAL=\"http://localhost:3000\"|" .env
+sed -i "/^POSTGRES_CONTAINER_NAME=/d" .env
+sed -i "/^POSTGRES_USER=/d" .env
+sed -i "/^POSTGRES_PASSWORD=/d" .env
+sed -i "/^POSTGRES_DB=/d" .env
+sed -i "/^POSTGRES_PORT=/d" .env
+$STD pnpm build
+$STD pnpm exec prisma migrate deploy
+msg_ok "Built Split Pro"
+
+msg_info "Creating Service"
+cat <<EOF >/etc/systemd/system/split-pro.service
+[Unit]
+Description=Split Pro
+After=network.target postgresql.service
+Requires=postgresql.service
+
+[Service]
+Type=simple
+User=root
+WorkingDirectory=/opt/split-pro
+EnvironmentFile=/opt/split-pro/.env
+ExecStart=/usr/bin/pnpm start
+Restart=on-failure
+RestartSec=5
+
+[Install]
+WantedBy=multi-user.target
+EOF
+systemctl enable -q --now split-pro
+msg_ok "Created Service"
+
+motd_ssh
+customize
+cleanup_lxc

install/tdarr-install.sh

@@ -20,12 +20,16 @@ msg_ok "Installed Dependencies"
 msg_info "Installing Tdarr"
 mkdir -p /opt/tdarr
 cd /opt/tdarr
-RELEASE=$(curl -fsSL https://f000.backblazeb2.com/file/tdarrs/versions.json | grep -oP '(?<="Tdarr_Updater": ")[^"]+' | grep linux_x64 | head -n 1)
-curl -fsSL "$RELEASE" -o Tdarr_Updater.zip
+RELEASE=$(curl_with_retry "https://f000.backblazeb2.com/file/tdarrs/versions.json" "-" | grep -oP '(?<="Tdarr_Updater": ")[^"]+' | grep linux_x64 | head -n 1)
+curl_with_retry "$RELEASE" "Tdarr_Updater.zip"
 $STD unzip Tdarr_Updater.zip
 chmod +x Tdarr_Updater
 $STD ./Tdarr_Updater
 rm -rf /opt/tdarr/Tdarr_Updater.zip
+[[ -f /opt/tdarr/Tdarr_Server/Tdarr_Server ]] || {
+  msg_error "Tdarr_Updater failed — tdarr.io may be blocked by local DNS"
+  exit 250
+}
 msg_ok "Installed Tdarr"
 
 setup_hwaccel

install/termix-install.sh

@@ -19,9 +19,41 @@ $STD apt install -y \
   python3 \
   nginx \
   openssl \
-  gettext-base
+  gettext-base \
+  libcairo2-dev \
+  libjpeg62-turbo-dev \
+  libpng-dev \
+  libtool-bin \
+  uuid-dev \
+  libvncserver-dev \
+  freerdp3-dev \
+  libssh2-1-dev \
+  libtelnet-dev \
+  libwebsockets-dev \
+  libpulse-dev \
+  libvorbis-dev \
+  libwebp-dev \
+  libssl-dev \
+  libpango1.0-dev \
+  libswscale-dev \
+  libavcodec-dev \
+  libavutil-dev \
+  libavformat-dev
 msg_ok "Installed Dependencies"
 
+msg_info "Building Guacamole Server (guacd)"
+fetch_and_deploy_gh_tag "guacd" "apache/guacamole-server" "latest" "/opt/guacamole-server"
+cd /opt/guacamole-server
+export CPPFLAGS="-Wno-error=deprecated-declarations"
+$STD autoreconf -fi
+$STD ./configure --with-init-dir=/etc/init.d --enable-allow-freerdp-snapshots
+$STD make
+$STD make install
+$STD ldconfig
+cd /opt
+rm -rf /opt/guacamole-server
+msg_ok "Built Guacamole Server (guacd)"
+
 NODE_VERSION="22" setup_nodejs
 fetch_and_deploy_gh_release "termix" "Termix-SSH/Termix"
 
@@ -74,17 +106,46 @@ systemctl reload nginx
 msg_ok "Configured Nginx"
 
 msg_info "Creating Service"
+mkdir -p /etc/guacamole
+cat <<EOF >/etc/guacamole/guacd.conf
+[server]
+bind_host = 127.0.0.1
+bind_port = 4822
+EOF
+
+cat <<EOF >/opt/termix/.env
+NODE_ENV=production
+DATA_DIR=/opt/termix/data
+GUACD_HOST=127.0.0.1
+GUACD_PORT=4822
+EOF
+
+cat <<EOF >/etc/systemd/system/guacd.service
+[Unit]
+Description=Guacamole Proxy Daemon (guacd)
+After=network.target
+
+[Service]
+Type=simple
+ExecStart=/usr/local/sbin/guacd -f -b 127.0.0.1 -l 4822
+Restart=on-failure
+RestartSec=5
+
+[Install]
+WantedBy=multi-user.target
+EOF
+
 cat <<EOF >/etc/systemd/system/termix.service
 [Unit]
 Description=Termix Backend
-After=network.target
+After=network.target guacd.service
+Wants=guacd.service
 
 [Service]
 Type=simple
 User=root
 WorkingDirectory=/opt/termix
-Environment=NODE_ENV=production
-Environment=DATA_DIR=/opt/termix/data
+EnvironmentFile=/opt/termix/.env
 ExecStart=/usr/bin/node /opt/termix/dist/backend/backend/starter.js
 Restart=on-failure
 RestartSec=5
@@ -92,7 +153,7 @@ RestartSec=5
 [Install]
 WantedBy=multi-user.target
 EOF
-systemctl enable -q --now termix
+systemctl enable -q --now guacd termix
 msg_ok "Created Service"
 
 motd_ssh

misc/tools.func

@@ -1979,6 +1979,47 @@ extract_version_from_json() {
   fi
 }
 
+# ------------------------------------------------------------------------------
+# Get latest GitHub tag (for repos that only publish tags, not releases).
+#
+# Usage:
+#   get_latest_gh_tag "owner/repo" [prefix]
+#
+# Arguments:
+#   $1 - GitHub repo (owner/repo)
+#   $2 - Optional prefix filter (e.g., "v" to only match tags starting with "v")
+#
+# Returns:
+#   Latest tag name (stdout), or returns 1 on failure
+# ------------------------------------------------------------------------------
+get_latest_gh_tag() {
+  local repo="$1"
+  local prefix="${2:-}"
+  local temp_file
+  temp_file=$(mktemp)
+
+  if ! github_api_call "https://api.github.com/repos/${repo}/tags?per_page=50" "$temp_file"; then
+    rm -f "$temp_file"
+    return 1
+  fi
+
+  local tag=""
+  if [[ -n "$prefix" ]]; then
+    tag=$(jq -r --arg p "$prefix" '[.[] | select(.name | startswith($p))][0].name // empty' "$temp_file")
+  else
+    tag=$(jq -r '.[0].name // empty' "$temp_file")
+  fi
+
+  rm -f "$temp_file"
+
+  if [[ -z "$tag" ]]; then
+    msg_error "No tags found for ${repo}"
+    return 1
+  fi
+
+  echo "$tag"
+}
+
 # ------------------------------------------------------------------------------
 # Get latest GitHub release version with fallback to tags
 # Usage: get_latest_github_release "owner/repo" [strip_v] [include_prerelease]
@@ -2077,103 +2118,131 @@ verify_gpg_fingerprint() {
 }
 
 # ------------------------------------------------------------------------------
-# Get latest GitHub tag for a repository.
+# Fetches and deploys a GitHub tag-based source tarball.
 #
 # Description:
-#   - Queries the GitHub API for tags (not releases)
-#   - Useful for repos that only create tags, not full releases
-#   - Supports optional prefix filter and version-only extraction
-#   - Returns the latest tag name (printed to stdout)
+#   - Downloads the source tarball for a given tag from GitHub
+#   - Extracts to the target directory
+#   - Writes the version to ~/.<app>
 #
 # Usage:
-#   MONGO_VERSION=$(get_latest_gh_tag "mongodb/mongo-tools")
-#   LATEST=$(get_latest_gh_tag "owner/repo" "v")          # only tags starting with "v"
-#   LATEST=$(get_latest_gh_tag "owner/repo" "" "true")     # strip leading "v"
+#     fetch_and_deploy_gh_tag "guacd" "apache/guacamole-server"
+#     fetch_and_deploy_gh_tag "guacd" "apache/guacamole-server" "latest" "/opt/guacamole-server"
 #
 # Arguments:
-#   $1 - GitHub repo (owner/repo)
-#   $2 - Tag prefix filter (optional, e.g. "v" or "100.")
-#   $3 - Strip prefix from result (optional, "true" to strip $2 prefix)
-#
-# Returns:
-#   0 on success (tag printed to stdout), 1 on failure
+#   $1 - App name (used for version file ~/.<app>)
+#   $2 - GitHub repo (owner/repo)
+#   $3 - Tag version (default: "latest" → auto-detect via get_latest_gh_tag)
+#   $4 - Target directory (default: /opt/$app)
 #
 # Notes:
-#   - Skips tags containing "rc", "alpha", "beta", "dev", "test"
-#   - Sorts by version number (sort -V) to find the latest
-#   - Respects GITHUB_TOKEN for rate limiting
+#   - Supports CLEAN_INSTALL=1 to wipe target before extracting
+#   - For repos that only publish tags, not GitHub Releases
 # ------------------------------------------------------------------------------
-get_latest_gh_tag() {
-  local repo="$1"
-  local prefix="${2:-}"
-  local strip_prefix="${3:-false}"
+fetch_and_deploy_gh_tag() {
+  local app="$1"
+  local repo="$2"
+  local version="${3:-latest}"
+  local target="${4:-/opt/$app}"
+  local app_lc=""
+  app_lc="$(echo "${app,,}" | tr -d ' ')"
+  local version_file="$HOME/.${app_lc}"
 
-  local header_args=()
-  [[ -n "${GITHUB_TOKEN:-}" ]] && header_args=(-H "Authorization: Bearer $GITHUB_TOKEN")
+  if [[ "$version" == "latest" ]]; then
+    version=$(get_latest_gh_tag "$repo") || {
+      msg_error "Failed to determine latest tag for ${repo}"
+      return 1
+    }
+  fi
 
-  local http_code=""
-  http_code=$(curl -sSL --max-time 20 -w "%{http_code}" -o /tmp/gh_tags.json \
-    -H 'Accept: application/vnd.github+json' \
-    -H 'X-GitHub-Api-Version: 2022-11-28' \
-    "${header_args[@]}" \
-    "https://api.github.com/repos/${repo}/tags?per_page=100" 2>/dev/null) || true
+  local current_version=""
+  [[ -f "$version_file" ]] && current_version=$(<"$version_file")
 
-  if [[ "$http_code" == "401" ]]; then
-    msg_error "GitHub API authentication failed (HTTP 401)."
-    if [[ -n "${GITHUB_TOKEN:-}" ]]; then
-      msg_error "Your GITHUB_TOKEN appears to be invalid or expired."
-    else
-      msg_error "The repository may require authentication. Try: export GITHUB_TOKEN=\"ghp_your_token\""
-    fi
-    rm -f /tmp/gh_tags.json
+  if [[ "$current_version" == "$version" ]]; then
+    msg_ok "$app is already up-to-date ($version)"
+    return 0
+  fi
+
+  local tmpdir
+  tmpdir=$(mktemp -d) || return 1
+  local tarball_url="https://github.com/${repo}/archive/refs/tags/${version}.tar.gz"
+  local filename="${app_lc}-${version}.tar.gz"
+
+  msg_info "Fetching GitHub tag: ${app} (${version})"
+
+  download_file "$tarball_url" "$tmpdir/$filename" || {
+    msg_error "Download failed: $tarball_url"
+    rm -rf "$tmpdir"
     return 1
+  }
+
+  mkdir -p "$target"
+  if [[ "${CLEAN_INSTALL:-0}" == "1" ]]; then
+    rm -rf "${target:?}/"*
   fi
 
-  if [[ "$http_code" == "403" ]]; then
-    msg_error "GitHub API rate limit exceeded (HTTP 403)."
-    msg_error "To increase the limit, export a GitHub token before running the script:"
-    msg_error "  export GITHUB_TOKEN=\"ghp_your_token_here\""
-    rm -f /tmp/gh_tags.json
+  tar --no-same-owner -xzf "$tmpdir/$filename" -C "$tmpdir" || {
+    msg_error "Failed to extract tarball"
+    rm -rf "$tmpdir"
     return 1
-  fi
+  }
 
-  if [[ "$http_code" == "000" || -z "$http_code" ]]; then
-    msg_error "GitHub API connection failed (no response)."
-    msg_error "Check your network/DNS: curl -sSL https://api.github.com/rate_limit"
-    rm -f /tmp/gh_tags.json
-    return 1
-  fi
+  local unpack_dir
+  unpack_dir=$(find "$tmpdir" -mindepth 1 -maxdepth 1 -type d | head -n1)
 
-  if [[ "$http_code" != "200" ]] || [[ ! -s /tmp/gh_tags.json ]]; then
-    msg_error "Unable to fetch tags for ${repo} (HTTP ${http_code})"
-    rm -f /tmp/gh_tags.json
-    return 1
-  fi
+  shopt -s dotglob nullglob
+  cp -r "$unpack_dir"/* "$target/"
+  shopt -u dotglob nullglob
 
-  local tags_json
-  tags_json=$(</tmp/gh_tags.json)
-  rm -f /tmp/gh_tags.json
-
-  # Extract tag names, filter by prefix, exclude pre-release patterns, sort by version
-  local latest=""
-  latest=$(echo "$tags_json" | grep -oP '"name":\s*"\K[^"]+' |
-    { [[ -n "$prefix" ]] && grep "^${prefix}" || cat; } |
-    grep -viE '(rc|alpha|beta|dev|test|preview|snapshot)' |
-    sort -V | tail -n1)
-
-  if [[ -z "$latest" ]]; then
-    msg_warn "No matching tags found for ${repo}${prefix:+ (prefix: $prefix)}"
-    return 1
-  fi
-
-  if [[ "$strip_prefix" == "true" && -n "$prefix" ]]; then
-    latest="${latest#"$prefix"}"
-  fi
-
-  echo "$latest"
+  rm -rf "$tmpdir"
+  echo "$version" >"$version_file"
+  msg_ok "Deployed ${app} ${version} to ${target}"
   return 0
 }
 
+# ------------------------------------------------------------------------------
+# Checks for new GitHub tag (for repos without releases).
+#
+# Description:
+#   - Uses get_latest_gh_tag to fetch the latest tag
+#   - Compares it to a local cached version (~/.<app>)
+#   - If newer, sets global CHECK_UPDATE_RELEASE and returns 0
+#
+# Usage:
+#     if check_for_gh_tag "guacd" "apache/guacamole-server"; then
+#       fetch_and_deploy_gh_tag "guacd" "apache/guacamole-server" "/opt/guacamole-server"
+#     fi
+#
+# Notes:
+#   - For repos that only publish tags, not GitHub Releases
+#   - Same interface as check_for_gh_release
+# ------------------------------------------------------------------------------
+check_for_gh_tag() {
+  local app="$1"
+  local repo="$2"
+  local prefix="${3:-}"
+  local app_lc=""
+  app_lc="$(echo "${app,,}" | tr -d ' ')"
+  local current_file="$HOME/.${app_lc}"
+
+  msg_info "Checking for update: ${app}"
+
+  local latest=""
+  latest=$(get_latest_gh_tag "$repo" "$prefix") || return 1
+
+  local current=""
+  [[ -f "$current_file" ]] && current="$(<"$current_file")"
+
+  if [[ -z "$current" || "$current" != "$latest" ]]; then
+    CHECK_UPDATE_RELEASE="$latest"
+    msg_ok "Update available: ${app} ${current:-not installed} → ${latest}"
+    return 0
+  fi
+
+  msg_ok "No update available: ${app} (${latest})"
+  return 1
+}
+
 # ==============================================================================
 # INSTALL FUNCTIONS
 # ==============================================================================
@@ -2519,6 +2588,8 @@ check_for_codeberg_release() {
 # ------------------------------------------------------------------------------
 create_self_signed_cert() {
   local APP_NAME="${1:-${APPLICATION}}"
+  local HOSTNAME="$(hostname -f)"
+  local IP="$(hostname -I | awk '{print $1}')"
   local APP_NAME_LC=$(echo "${APP_NAME,,}" | tr -d ' ')
   local CERT_DIR="/etc/ssl/${APP_NAME_LC}"
   local CERT_KEY="${CERT_DIR}/${APP_NAME_LC}.key"
@@ -2536,8 +2607,8 @@ create_self_signed_cert() {
 
   mkdir -p "$CERT_DIR"
   $STD openssl req -new -newkey rsa:2048 -days 365 -nodes -x509 \
-    -subj "/CN=${APP_NAME}" \
-    -addext "subjectAltName=DNS:${APP_NAME}" \
+    -subj "/CN=${HOSTNAME}" \
+    -addext "subjectAltName=DNS:${HOSTNAME},DNS:localhost,IP:${IP},IP:127.0.0.1" \
     -keyout "$CERT_KEY" \
     -out "$CERT_CRT" || {
     msg_error "Failed to create self-signed certificate"
@@ -4185,6 +4256,8 @@ function setup_gs() {
 #   - NVIDIA requires matching host driver version
 # ------------------------------------------------------------------------------
 function setup_hwaccel() {
+  local service_user="${1:-}"
+
   # Check if user explicitly disabled GPU in advanced settings
   # ENABLE_GPU is exported from build.func
   if [[ "${ENABLE_GPU:-no}" == "no" ]]; then
@@ -4436,7 +4509,7 @@ function setup_hwaccel() {
   # ═══════════════════════════════════════════════════════════════════════════
   # Device Permissions
   # ═══════════════════════════════════════════════════════════════════════════
-  _setup_gpu_permissions "$in_ct"
+  _setup_gpu_permissions "$in_ct" "$service_user"
 
   cache_installed_version "hwaccel" "1.0"
   msg_ok "Setup Hardware Acceleration"
@@ -4676,16 +4749,9 @@ _setup_rocm() {
     return 0
   }
 
-  # AMDGPU driver repository (append to same keyring)
-  {
-    echo ""
-    echo "Types: deb"
-    echo "URIs: https://repo.radeon.com/amdgpu/latest/ubuntu"
-    echo "Suites: ${ROCM_REPO_CODENAME}"
-    echo "Components: main"
-    echo "Architectures: amd64"
-    echo "Signed-By: /etc/apt/keyrings/rocm.gpg"
-  } >>/etc/apt/sources.list.d/rocm.sources
+  # Note: The amdgpu/latest/ubuntu repo (kernel driver packages) is intentionally
+  # omitted — kernel drivers are managed by the Proxmox host, not the LXC container.
+  # Only the ROCm userspace compute stack is needed inside the container.
 
   # Pin ROCm packages to prefer radeon repo
   cat <<EOF >/etc/apt/preferences.d/rocm-pin-600
@@ -4694,7 +4760,26 @@ Pin: release o=repo.radeon.com
 Pin-Priority: 600
 EOF
 
-  $STD apt update || msg_warn "apt update failed (AMD repo may be temporarily unavailable) — continuing anyway"
+  # apt update with retry — repo.radeon.com CDN can be mid-sync (transient size mismatches).
+  # Run with ERR trap disabled so a transient failure does not abort the entire install.
+  local _apt_ok=0
+  for _attempt in 1 2 3; do
+    if (
+      set +e
+      apt-get update -qq 2>&1
+      exit $?
+    ) 2>/dev/null; then
+      _apt_ok=1
+      break
+    fi
+    msg_warn "apt update failed (attempt ${_attempt}/3) — AMD repo may be temporarily unavailable, retrying in 30s…"
+    sleep 30
+  done
+  if [[ $_apt_ok -eq 0 ]]; then
+    msg_warn "apt update still failing after 3 attempts — skipping ROCm install"
+    return 0
+  fi
+
   # Install only runtime packages — full 'rocm' meta-package includes 15GB+ dev tools
   $STD apt install -y rocm-opencl-runtime rocm-hip-runtime rocm-smi-lib 2>/dev/null || {
     msg_warn "ROCm runtime install failed — trying minimal set"
@@ -5058,6 +5143,7 @@ EOF
 # ══════════════════════════════════════════════════════════════════════════════
 _setup_gpu_permissions() {
   local in_ct="$1"
+  local service_user="${2:-}"
 
   # /dev/dri permissions (Intel/AMD)
   if [[ "$in_ct" == "0" && -d /dev/dri ]]; then
@@ -5124,6 +5210,12 @@ _setup_gpu_permissions() {
     chmod 666 /dev/kfd 2>/dev/null || true
     msg_info "AMD ROCm compute device configured"
   fi
+
+  # Add service user to render and video groups for GPU hardware acceleration
+  if [[ -n "$service_user" ]]; then
+    usermod -aG render "$service_user" 2>/dev/null || true
+    usermod -aG video "$service_user" 2>/dev/null || true
+  fi
 }
 
 # ------------------------------------------------------------------------------
@@ -6606,22 +6698,38 @@ EOF
 #   - Optionally uses official PGDG repository for specific versions
 #   - Detects existing PostgreSQL version
 #   - Dumps all databases before upgrade
-#   - Installs optional PG_MODULES (e.g. postgis, contrib)
+#   - Installs optional PG_MODULES (e.g. postgis, contrib, cron)
 #   - Restores dumped data post-upgrade
 #
 # Variables:
 #   USE_PGDG_REPO  - Use official PGDG repository (default: true)
 #                    Set to "false" to use distro packages instead
 #   PG_VERSION    - Major PostgreSQL version (e.g. 15, 16) (default: 16)
-#   PG_MODULES    - Comma-separated list of modules (e.g. "postgis,contrib")
+#   PG_MODULES    - Comma-separated list of modules (e.g. "postgis,contrib,cron")
 #
 # Examples:
-#   setup_postgresql                              # Uses PGDG repo, PG 16
-#   PG_VERSION="17" setup_postgresql               # Specific version from PGDG
-#   USE_PGDG_REPO=false setup_postgresql           # Uses distro package instead
+#   setup_postgresql                                          # Uses PGDG repo, PG 16
+#   PG_VERSION="17" setup_postgresql                          # Specific version from PGDG
+#   USE_PGDG_REPO=false setup_postgresql                      # Uses distro package instead
+#   PG_VERSION="17" PG_MODULES="cron" setup_postgresql        # With pg_cron module
 # ------------------------------------------------------------------------------
 
-function setup_postgresql() {
+# Internal helper: Configure shared_preload_libraries for pg_cron
+_configure_pg_cron_preload() {
+  local modules="${1:-}"
+  [[ -z "$modules" ]] && return 0
+  if [[ ",$modules," == *",cron,"* ]]; then
+    local current_libs
+    current_libs=$(sudo -u postgres psql -tAc "SHOW shared_preload_libraries;" 2>/dev/null || echo "")
+    if [[ "$current_libs" != *"pg_cron"* ]]; then
+      local new_libs="${current_libs:+${current_libs},}pg_cron"
+      $STD sudo -u postgres psql -c "ALTER SYSTEM SET shared_preload_libraries = '${new_libs}';"
+      $STD systemctl restart postgresql
+    fi
+  fi
+}
+
+setup_postgresql() {
   local PG_VERSION="${PG_VERSION:-16}"
   local PG_MODULES="${PG_MODULES:-}"
   local USE_PGDG_REPO="${USE_PGDG_REPO:-true}"
@@ -6659,6 +6767,7 @@ function setup_postgresql() {
           $STD apt install -y "postgresql-${CURRENT_PG_VERSION}-${module}" 2>/dev/null || true
         done
       fi
+      _configure_pg_cron_preload "$PG_MODULES"
       return 0
     fi
 
@@ -6694,6 +6803,7 @@ function setup_postgresql() {
         $STD apt install -y "postgresql-${INSTALLED_VERSION}-${module}" 2>/dev/null || true
       done
     fi
+    _configure_pg_cron_preload "$PG_MODULES"
     return 0
   fi
 
@@ -6715,6 +6825,7 @@ function setup_postgresql() {
         $STD apt install -y "postgresql-${PG_VERSION}-${module}" 2>/dev/null || true
       done
     fi
+    _configure_pg_cron_preload "$PG_MODULES"
     return 0
   fi
 
@@ -6742,13 +6853,16 @@ function setup_postgresql() {
   local SUITE
   case "$DISTRO_CODENAME" in
   trixie | forky | sid)
+
     if verify_repo_available "https://apt.postgresql.org/pub/repos/apt" "trixie-pgdg"; then
       SUITE="trixie-pgdg"
+
     else
       msg_warn "PGDG repo not available for ${DISTRO_CODENAME}, falling back to distro packages"
       USE_PGDG_REPO=false setup_postgresql
       return $?
     fi
+
     ;;
   *)
     SUITE=$(get_fallback_suite "$DISTRO_ID" "$DISTRO_CODENAME" "https://apt.postgresql.org/pub/repos/apt")
@@ -6832,6 +6946,7 @@ function setup_postgresql() {
       }
     done
   fi
+  _configure_pg_cron_preload "$PG_MODULES"
 }
 
 # ------------------------------------------------------------------------------
@@ -6850,6 +6965,7 @@ function setup_postgresql() {
 #   PG_DB_NAME="immich" PG_DB_USER="immich" PG_DB_EXTENSIONS="pgvector" setup_postgresql_db
 #   PG_DB_NAME="ghostfolio" PG_DB_USER="ghostfolio" PG_DB_GRANT_SUPERUSER="true" setup_postgresql_db
 #   PG_DB_NAME="adventurelog" PG_DB_USER="adventurelog" PG_DB_EXTENSIONS="postgis" setup_postgresql_db
+#   PG_DB_NAME="splitpro" PG_DB_USER="splitpro" PG_DB_EXTENSIONS="pg_cron" setup_postgresql_db
 #
 # Variables:
 #   PG_DB_NAME             - Database name (required)
@@ -6881,6 +6997,13 @@ function setup_postgresql_db() {
   $STD sudo -u postgres psql -c "CREATE ROLE $PG_DB_USER WITH LOGIN PASSWORD '$PG_DB_PASS';"
   $STD sudo -u postgres psql -c "CREATE DATABASE $PG_DB_NAME WITH OWNER $PG_DB_USER ENCODING 'UTF8' TEMPLATE template0;"
 
+  # Configure pg_cron database BEFORE creating the extension (must be set before pg_cron loads)
+  if [[ -n "${PG_DB_EXTENSIONS:-}" ]] && [[ ",${PG_DB_EXTENSIONS//[[:space:]]/}," == *",pg_cron,"* ]]; then
+    $STD sudo -u postgres psql -c "ALTER SYSTEM SET cron.database_name = '${PG_DB_NAME}';"
+    $STD sudo -u postgres psql -c "ALTER SYSTEM SET cron.timezone = 'UTC';"
+    $STD systemctl restart postgresql
+  fi
+
   # Install extensions (comma-separated)
   if [[ -n "${PG_DB_EXTENSIONS:-}" ]]; then
     IFS=',' read -ra EXT_LIST <<<"${PG_DB_EXTENSIONS:-}"
@@ -6890,6 +7013,12 @@ function setup_postgresql_db() {
     done
   fi
 
+  # Grant pg_cron schema permissions to DB user
+  if [[ -n "${PG_DB_EXTENSIONS:-}" ]] && [[ ",${PG_DB_EXTENSIONS//[[:space:]]/}," == *",pg_cron,"* ]]; then
+    $STD sudo -u postgres psql -d "$PG_DB_NAME" -c "GRANT USAGE ON SCHEMA cron TO ${PG_DB_USER};"
+    $STD sudo -u postgres psql -d "$PG_DB_NAME" -c "GRANT ALL ON ALL TABLES IN SCHEMA cron TO ${PG_DB_USER};"
+  fi
+
   # ALTER ROLE settings for Django/Rails compatibility (unless skipped)
   if [[ "${PG_DB_SKIP_ALTER_ROLE:-}" != "true" ]]; then
     $STD sudo -u postgres psql -c "ALTER ROLE $PG_DB_USER SET client_encoding TO 'utf8';"
@@ -6931,7 +7060,6 @@ function setup_postgresql_db() {
   export PG_DB_USER
   export PG_DB_PASS
 }
-
 # ------------------------------------------------------------------------------
 # Installs rbenv and ruby-build, installs Ruby and optionally Rails.
 #

vm/archlinux-vm.sh

@@ -310,10 +310,7 @@ function advanced_settings() {
       HN="arch-linux"
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     else
-      HN=$(echo "${VM_NAME,,}" | tr -cs 'a-z0-9-' '-' | sed 's/^-//;s/-$//')
-      if [ "$HN" != "${VM_NAME,,}" ]; then
-        whiptail --backtitle "Proxmox VE Helper Scripts" --title "HOSTNAME ADJUSTED" --msgbox "Invalid characters detected. Hostname has been adjusted to:\n\n  $HN" 10 58
-      fi
+      HN=$(echo "${VM_NAME,,}" | tr -d ' ')
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     fi
   else
@@ -335,31 +332,27 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$CORE_COUNT" ]; then CORE_COUNT="2"; fi
-      if [[ "$CORE_COUNT" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "CPU Cores must be a positive integer (e.g., 2)." 8 58
+  if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z "$CORE_COUNT" ]; then
+      CORE_COUNT="2"
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     else
-      exit-script
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$RAM_SIZE" ]; then RAM_SIZE="2048"; fi
-      if [[ "$RAM_SIZE" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "RAM Size must be a positive integer in MiB (e.g., 2048)." 8 58
+  if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z "$RAM_SIZE" ]; then
+      RAM_SIZE="2048"
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     else
-      exit-script
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if BRG=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Bridge" 8 58 vmbr0 --title "BRIDGE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
     if [ -z "$BRG" ]; then
@@ -372,61 +365,43 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 "$GEN_MAC" --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MAC1" ]; then
-        MAC="$GEN_MAC"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
-        break
-      fi
-      if [[ "$MAC1" =~ ^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$ ]]; then
-        MAC="$MAC1"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "Invalid MAC address format. Use XX:XX:XX:XX:XX:XX (e.g., AA:BB:CC:DD:EE:FF)." 8 58
+  if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 "$GEN_MAC" --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z "$MAC1" ]; then
+      MAC="$GEN_MAC"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
     else
-      exit-script
+      MAC="$MAC1"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$VLAN1" ]; then
-        VLAN1="Default"
-        VLAN=""
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      if [[ "$VLAN1" =~ ^[0-9]+$ ]] && [ "$VLAN1" -ge 1 ] && [ "$VLAN1" -le 4094 ]; then
-        VLAN=",tag=$VLAN1"
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "VLAN must be a number between 1 and 4094, or leave blank for default." 8 58
+  if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z "$VLAN1" ]; then
+      VLAN1="Default"
+      VLAN=""
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     else
-      exit-script
+      VLAN=",tag=$VLAN1"
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MTU1" ]; then
-        MTU1="Default"
-        MTU=""
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      if [[ "$MTU1" =~ ^[0-9]+$ ]] && [ "$MTU1" -ge 576 ] && [ "$MTU1" -le 65520 ]; then
-        MTU=",mtu=$MTU1"
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "MTU Size must be a number between 576 and 65520, or leave blank for default." 8 58
+  if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z "$MTU1" ]; then
+      MTU1="Default"
+      MTU=""
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     else
-      exit-script
+      MTU=",mtu=$MTU1"
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "START VIRTUAL MACHINE" --yesno "Start VM when completed?" 10 58); then
     echo -e "${GATEWAY}${BOLD}${DGN}Start VM when completed: ${BGN}yes${CL}"

vm/debian-13-vm.sh

@@ -325,10 +325,7 @@ function advanced_settings() {
       HN="debian"
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     else
-      HN=$(echo "${VM_NAME,,}" | tr -cs 'a-z0-9-' '-' | sed 's/^-//;s/-$//')
-      if [ "$HN" != "${VM_NAME,,}" ]; then
-        whiptail --backtitle "Proxmox VE Helper Scripts" --title "HOSTNAME ADJUSTED" --msgbox "Invalid characters detected. Hostname has been adjusted to:\n\n  $HN" 10 58
-      fi
+      HN=$(echo "${VM_NAME,,}" | tr -d ' ')
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     fi
   else
@@ -350,31 +347,27 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$CORE_COUNT" ]; then CORE_COUNT="2"; fi
-      if [[ "$CORE_COUNT" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "CPU Cores must be a positive integer (e.g., 2)." 8 58
+  if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z "$CORE_COUNT" ]; then
+      CORE_COUNT="2"
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     else
-      exit-script
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$RAM_SIZE" ]; then RAM_SIZE="2048"; fi
-      if [[ "$RAM_SIZE" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "RAM Size must be a positive integer in MiB (e.g., 2048)." 8 58
+  if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z "$RAM_SIZE" ]; then
+      RAM_SIZE="2048"
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     else
-      exit-script
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if BRG=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Bridge" 8 58 vmbr0 --title "BRIDGE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
     if [ -z "$BRG" ]; then
@@ -387,61 +380,43 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 "$GEN_MAC" --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MAC1" ]; then
-        MAC="$GEN_MAC"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
-        break
-      fi
-      if [[ "$MAC1" =~ ^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$ ]]; then
-        MAC="$MAC1"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "Invalid MAC address format. Use XX:XX:XX:XX:XX:XX (e.g., AA:BB:CC:DD:EE:FF)." 8 58
+  if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 "$GEN_MAC" --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z "$MAC1" ]; then
+      MAC="$GEN_MAC"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
     else
-      exit-script
+      MAC="$MAC1"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$VLAN1" ]; then
-        VLAN1="Default"
-        VLAN=""
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      if [[ "$VLAN1" =~ ^[0-9]+$ ]] && [ "$VLAN1" -ge 1 ] && [ "$VLAN1" -le 4094 ]; then
-        VLAN=",tag=$VLAN1"
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "VLAN must be a number between 1 and 4094, or leave blank for default." 8 58
+  if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z "$VLAN1" ]; then
+      VLAN1="Default"
+      VLAN=""
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     else
-      exit-script
+      VLAN=",tag=$VLAN1"
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MTU1" ]; then
-        MTU1="Default"
-        MTU=""
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      if [[ "$MTU1" =~ ^[0-9]+$ ]] && [ "$MTU1" -ge 576 ] && [ "$MTU1" -le 65520 ]; then
-        MTU=",mtu=$MTU1"
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "MTU Size must be a number between 576 and 65520, or leave blank for default." 8 58
+  if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z "$MTU1" ]; then
+      MTU1="Default"
+      MTU=""
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     else
-      exit-script
+      MTU=",mtu=$MTU1"
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   select_cloud_init
 

vm/debian-vm.sh

@@ -315,10 +315,7 @@ function advanced_settings() {
       HN="debian"
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     else
-      HN=$(echo "${VM_NAME,,}" | tr -cs 'a-z0-9-' '-' | sed 's/^-//;s/-$//')
-      if [ "$HN" != "${VM_NAME,,}" ]; then
-        whiptail --backtitle "Proxmox VE Helper Scripts" --title "HOSTNAME ADJUSTED" --msgbox "Invalid characters detected. Hostname has been adjusted to:\n\n  $HN" 10 58
-      fi
+      HN=$(echo ${VM_NAME,,} | tr -d ' ')
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     fi
   else
@@ -340,31 +337,27 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$CORE_COUNT" ]; then CORE_COUNT="2"; fi
-      if [[ "$CORE_COUNT" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "CPU Cores must be a positive integer (e.g., 2)." 8 58
+  if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $CORE_COUNT ]; then
+      CORE_COUNT="2"
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     else
-      exit-script
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$RAM_SIZE" ]; then RAM_SIZE="2048"; fi
-      if [[ "$RAM_SIZE" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "RAM Size must be a positive integer in MiB (e.g., 2048)." 8 58
+  if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $RAM_SIZE ]; then
+      RAM_SIZE="2048"
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     else
-      exit-script
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if BRG=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Bridge" 8 58 vmbr0 --title "BRIDGE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
     if [ -z $BRG ]; then
@@ -377,61 +370,43 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MAC1" ]; then
-        MAC="$GEN_MAC"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
-        break
-      fi
-      if [[ "$MAC1" =~ ^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$ ]]; then
-        MAC="$MAC1"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "Invalid MAC address format. Use XX:XX:XX:XX:XX:XX (e.g., AA:BB:CC:DD:EE:FF)." 8 58
+  if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MAC1 ]; then
+      MAC="$GEN_MAC"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
     else
-      exit-script
+      MAC="$MAC1"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$VLAN1" ]; then
-        VLAN1="Default"
-        VLAN=""
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      if [[ "$VLAN1" =~ ^[0-9]+$ ]] && [ "$VLAN1" -ge 1 ] && [ "$VLAN1" -le 4094 ]; then
-        VLAN=",tag=$VLAN1"
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "VLAN must be a number between 1 and 4094, or leave blank for default." 8 58
+  if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $VLAN1 ]; then
+      VLAN1="Default"
+      VLAN=""
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     else
-      exit-script
+      VLAN=",tag=$VLAN1"
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MTU1" ]; then
-        MTU1="Default"
-        MTU=""
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      if [[ "$MTU1" =~ ^[0-9]+$ ]] && [ "$MTU1" -ge 576 ] && [ "$MTU1" -le 65520 ]; then
-        MTU=",mtu=$MTU1"
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "MTU Size must be a number between 576 and 65520, or leave blank for default." 8 58
+  if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MTU1 ]; then
+      MTU1="Default"
+      MTU=""
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     else
-      exit-script
+      MTU=",mtu=$MTU1"
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "CLOUD-INIT" --yesno "Configure the VM with Cloud-init?" --defaultno 10 58); then
     echo -e "${CLOUD}${BOLD}${DGN}Configure Cloud-init: ${BGN}yes${CL}"

vm/docker-vm.sh

@@ -251,10 +251,7 @@ function advanced_settings() {
     if [ -z $VM_NAME ]; then
       HN="docker"
     else
-      HN=$(echo "${VM_NAME,,}" | tr -cs 'a-z0-9-' '-' | sed 's/^-//;s/-$//')
-      if [ "$HN" != "${VM_NAME,,}" ]; then
-        whiptail --backtitle "Proxmox VE Helper Scripts" --title "HOSTNAME ADJUSTED" --msgbox "Invalid characters detected. Hostname has been adjusted to:\n\n  $HN" 10 58
-      fi
+      HN=$(echo ${VM_NAME,,} | tr -d ' ')
     fi
     echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
   else
@@ -278,32 +275,24 @@ function advanced_settings() {
   fi
 
   # CPU Cores
-  while true; do
-    if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$CORE_COUNT" ]; then CORE_COUNT="2"; fi
-      if [[ "$CORE_COUNT" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "CPU Cores must be a positive integer (e.g., 2)." 8 58
-    else
-      exit_script
+  if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $CORE_COUNT ]; then
+      CORE_COUNT="2"
     fi
-  done
+    echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
+  else
+    exit_script
+  fi
 
   # RAM Size
-  while true; do
-    if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 4096 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$RAM_SIZE" ]; then RAM_SIZE="4096"; fi
-      if [[ "$RAM_SIZE" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "RAM Size must be a positive integer in MiB (e.g., 4096)." 8 58
-    else
-      exit_script
+  if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 4096 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $RAM_SIZE ]; then
+      RAM_SIZE="4096"
     fi
-  done
+    echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
+  else
+    exit_script
+  fi
 
   # Bridge
   if BRG=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Bridge" 8 58 vmbr0 --title "BRIDGE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
@@ -316,63 +305,42 @@ function advanced_settings() {
   fi
 
   # MAC Address
-  while true; do
-    if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MAC1" ]; then
-        MAC="$GEN_MAC"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
-        break
-      fi
-      if [[ "$MAC1" =~ ^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$ ]]; then
-        MAC="$MAC1"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "Invalid MAC address format. Use XX:XX:XX:XX:XX:XX (e.g., AA:BB:CC:DD:EE:FF)." 8 58
+  if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MAC1 ]; then
+      MAC="$GEN_MAC"
     else
-      exit_script
+      MAC="$MAC1"
     fi
-  done
+    echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
+  else
+    exit_script
+  fi
 
   # VLAN
-  while true; do
-    if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan (leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$VLAN1" ]; then
-        VLAN1="Default"
-        VLAN=""
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      if [[ "$VLAN1" =~ ^[0-9]+$ ]] && [ "$VLAN1" -ge 1 ] && [ "$VLAN1" -le 4094 ]; then
-        VLAN=",tag=$VLAN1"
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "VLAN must be a number between 1 and 4094, or leave blank for default." 8 58
+  if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan (leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $VLAN1 ]; then
+      VLAN1="Default"
+      VLAN=""
     else
-      exit_script
+      VLAN=",tag=$VLAN1"
     fi
-  done
+    echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
+  else
+    exit_script
+  fi
 
   # MTU
-  while true; do
-    if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MTU1" ]; then
-        MTU1="Default"
-        MTU=""
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      if [[ "$MTU1" =~ ^[0-9]+$ ]] && [ "$MTU1" -ge 576 ] && [ "$MTU1" -le 65520 ]; then
-        MTU=",mtu=$MTU1"
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "MTU Size must be a number between 576 and 65520, or leave blank for default." 8 58
+  if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MTU1 ]; then
+      MTU1="Default"
+      MTU=""
     else
-      exit_script
+      MTU=",mtu=$MTU1"
     fi
-  done
+    echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
+  else
+    exit_script
+  fi
 
   # Start VM
   if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "START VIRTUAL MACHINE" --yesno "Start VM when completed?" 10 58); then

vm/haos-vm.sh

@@ -391,10 +391,7 @@ function advanced_settings() {
       HN="haos${BRANCH}"
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     else
-      HN=$(echo "${VM_NAME,,}" | tr -cs 'a-z0-9-' '-' | sed 's/^-//;s/-$//')
-      if [ "$HN" != "${VM_NAME,,}" ]; then
-        whiptail --backtitle "Proxmox VE Helper Scripts" --title "HOSTNAME ADJUSTED" --msgbox "Invalid characters detected. Hostname has been adjusted to:\n\n  $HN" 10 58
-      fi
+      HN=$(echo ${VM_NAME,,} | tr -d ' ')
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     fi
   else
@@ -419,31 +416,27 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$CORE_COUNT" ]; then CORE_COUNT="2"; fi
-      if [[ "$CORE_COUNT" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "CPU Cores must be a positive integer (e.g., 2)." 8 58
+  if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $CORE_COUNT ]; then
+      CORE_COUNT="2"
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     else
-      exit-script
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$RAM_SIZE" ]; then RAM_SIZE="4096"; fi
-      if [[ "$RAM_SIZE" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "RAM Size must be a positive integer in MiB (e.g., 4096)." 8 58
+  if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $RAM_SIZE ]; then
+      RAM_SIZE="4096"
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     else
-      exit-script
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if BRG=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Bridge" 8 58 vmbr0 --title "BRIDGE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
     if [ -z $BRG ]; then
@@ -456,61 +449,43 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MAC1" ]; then
-        MAC="$GEN_MAC"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
-        break
-      fi
-      if [[ "$MAC1" =~ ^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$ ]]; then
-        MAC="$MAC1"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "Invalid MAC address format. Use XX:XX:XX:XX:XX:XX (e.g., AA:BB:CC:DD:EE:FF)." 8 58
+  if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MAC1 ]; then
+      MAC="$GEN_MAC"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
     else
-      exit-script
+      MAC="$MAC1"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$VLAN1" ]; then
-        VLAN1="Default"
-        VLAN=""
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      if [[ "$VLAN1" =~ ^[0-9]+$ ]] && [ "$VLAN1" -ge 1 ] && [ "$VLAN1" -le 4094 ]; then
-        VLAN=",tag=$VLAN1"
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "VLAN must be a number between 1 and 4094, or leave blank for default." 8 58
+  if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $VLAN1 ]; then
+      VLAN1="Default"
+      VLAN=""
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     else
-      exit-script
+      VLAN=",tag=$VLAN1"
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MTU1" ]; then
-        MTU1="Default"
-        MTU=""
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      if [[ "$MTU1" =~ ^[0-9]+$ ]] && [ "$MTU1" -ge 576 ] && [ "$MTU1" -le 65520 ]; then
-        MTU=",mtu=$MTU1"
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "MTU Size must be a number between 576 and 65520, or leave blank for default." 8 58
+  if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MTU1 ]; then
+      MTU1="Default"
+      MTU=""
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     else
-      exit-script
+      MTU=",mtu=$MTU1"
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "START VIRTUAL MACHINE" --yesno "Start VM when completed?" 10 58); then
     echo -e "${DGN}Start VM when completed: ${BGN}yes${CL}"

vm/mikrotik-routeros.sh

@@ -377,10 +377,7 @@ function advanced_settings() {
       HN="mikrotik-routeros-chr"
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     else
-      HN=$(echo "${VM_NAME,,}" | tr -cs 'a-z0-9-' '-' | sed 's/^-//;s/-$//')
-      if [ "$HN" != "${VM_NAME,,}" ]; then
-        whiptail --backtitle "Proxmox VE Helper Scripts" --title "HOSTNAME ADJUSTED" --msgbox "Invalid characters detected. Hostname has been adjusted to:\n\n  $HN" 10 58
-      fi
+      HN=$(echo ${VM_NAME,,} | tr -d ' ')
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     fi
   else
@@ -402,31 +399,27 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$CORE_COUNT" ]; then CORE_COUNT="2"; fi
-      if [[ "$CORE_COUNT" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "CPU Cores must be a positive integer (e.g., 2)." 8 58
+  if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $CORE_COUNT ]; then
+      CORE_COUNT="2"
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     else
-      exit-script
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$RAM_SIZE" ]; then RAM_SIZE="2048"; fi
-      if [[ "$RAM_SIZE" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "RAM Size must be a positive integer in MiB (e.g., 2048)." 8 58
+  if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $RAM_SIZE ]; then
+      RAM_SIZE="2048"
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     else
-      exit-script
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if BRG=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Bridge" 8 58 vmbr0 --title "BRIDGE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
     if [ -z $BRG ]; then
@@ -439,61 +432,43 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MAC1" ]; then
-        MAC="$GEN_MAC"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
-        break
-      fi
-      if [[ "$MAC1" =~ ^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$ ]]; then
-        MAC="$MAC1"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "Invalid MAC address format. Use XX:XX:XX:XX:XX:XX (e.g., AA:BB:CC:DD:EE:FF)." 8 58
+  if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MAC1 ]; then
+      MAC="$GEN_MAC"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
     else
-      exit-script
+      MAC="$MAC1"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$VLAN1" ]; then
-        VLAN1="Default"
-        VLAN=""
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      if [[ "$VLAN1" =~ ^[0-9]+$ ]] && [ "$VLAN1" -ge 1 ] && [ "$VLAN1" -le 4094 ]; then
-        VLAN=",tag=$VLAN1"
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "VLAN must be a number between 1 and 4094, or leave blank for default." 8 58
+  if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $VLAN1 ]; then
+      VLAN1="Default"
+      VLAN=""
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     else
-      exit-script
+      VLAN=",tag=$VLAN1"
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MTU1" ]; then
-        MTU1="Default"
-        MTU=""
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      if [[ "$MTU1" =~ ^[0-9]+$ ]] && [ "$MTU1" -ge 576 ] && [ "$MTU1" -le 65520 ]; then
-        MTU=",mtu=$MTU1"
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "MTU Size must be a number between 576 and 65520, or leave blank for default." 8 58
+  if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MTU1 ]; then
+      MTU1="Default"
+      MTU=""
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     else
-      exit-script
+      MTU=",mtu=$MTU1"
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "START VIRTUAL MACHINE" --yesno "Start VM when completed?" 10 58); then
     echo -e "${GATEWAY}${BOLD}${DGN}Start VM when completed: ${BGN}yes${CL}"

vm/nextcloud-vm.sh

@@ -313,10 +313,7 @@ function advanced_settings() {
       HN="nextcloud-vm"
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     else
-      HN=$(echo "${VM_NAME,,}" | tr -cs 'a-z0-9-' '-' | sed 's/^-//;s/-$//')
-      if [ "$HN" != "${VM_NAME,,}" ]; then
-        whiptail --backtitle "Proxmox VE Helper Scripts" --title "HOSTNAME ADJUSTED" --msgbox "Invalid characters detected. Hostname has been adjusted to:\n\n  $HN" 10 58
-      fi
+      HN=$(echo ${VM_NAME,,} | tr -d ' ')
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     fi
   else
@@ -338,31 +335,27 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$CORE_COUNT" ]; then CORE_COUNT="2"; fi
-      if [[ "$CORE_COUNT" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "CPU Cores must be a positive integer (e.g., 2)." 8 58
+  if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $CORE_COUNT ]; then
+      CORE_COUNT="2"
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     else
-      exit-script
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$RAM_SIZE" ]; then RAM_SIZE="2048"; fi
-      if [[ "$RAM_SIZE" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "RAM Size must be a positive integer in MiB (e.g., 2048)." 8 58
+  if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $RAM_SIZE ]; then
+      RAM_SIZE="2048"
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     else
-      exit-script
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if BRG=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Bridge" 8 58 vmbr0 --title "BRIDGE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
     if [ -z $BRG ]; then
@@ -375,61 +368,43 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MAC1" ]; then
-        MAC="$GEN_MAC"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
-        break
-      fi
-      if [[ "$MAC1" =~ ^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$ ]]; then
-        MAC="$MAC1"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "Invalid MAC address format. Use XX:XX:XX:XX:XX:XX (e.g., AA:BB:CC:DD:EE:FF)." 8 58
+  if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MAC1 ]; then
+      MAC="$GEN_MAC"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
     else
-      exit-script
+      MAC="$MAC1"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$VLAN1" ]; then
-        VLAN1="Default"
-        VLAN=""
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      if [[ "$VLAN1" =~ ^[0-9]+$ ]] && [ "$VLAN1" -ge 1 ] && [ "$VLAN1" -le 4094 ]; then
-        VLAN=",tag=$VLAN1"
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "VLAN must be a number between 1 and 4094, or leave blank for default." 8 58
+  if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $VLAN1 ]; then
+      VLAN1="Default"
+      VLAN=""
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     else
-      exit-script
+      VLAN=",tag=$VLAN1"
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MTU1" ]; then
-        MTU1="Default"
-        MTU=""
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      if [[ "$MTU1" =~ ^[0-9]+$ ]] && [ "$MTU1" -ge 576 ] && [ "$MTU1" -le 65520 ]; then
-        MTU=",mtu=$MTU1"
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "MTU Size must be a number between 576 and 65520, or leave blank for default." 8 58
+  if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MTU1 ]; then
+      MTU1="Default"
+      MTU=""
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     else
-      exit-script
+      MTU=",mtu=$MTU1"
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "START VIRTUAL MACHINE" --yesno "Start VM when completed?" 10 58); then
     echo -e "${GATEWAY}${BOLD}${DGN}Start VM when completed: ${BGN}yes${CL}"

vm/openwrt-vm.sh

@@ -328,41 +328,30 @@ function advanced_settings() {
     if [ -z $VM_NAME ]; then
       HN="openwrt"
     else
-      HN=$(echo "${VM_NAME,,}" | tr -cs 'a-z0-9-' '-' | sed 's/^-//;s/-$//')
-      if [ "$HN" != "${VM_NAME,,}" ]; then
-        whiptail --backtitle "Proxmox VE Helper Scripts" --title "HOSTNAME ADJUSTED" --msgbox "Invalid characters detected. Hostname has been adjusted to:\n\n  $HN" 10 58
-      fi
+      HN=$(echo ${VM_NAME,,} | tr -d ' ')
     fi
     echo -e "${DGN}Using Hostname: ${BGN}$HN${CL}"
   else
     exit-script
   fi
 
-  while true; do
-    if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 1 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$CORE_COUNT" ]; then CORE_COUNT="1"; fi
-      if [[ "$CORE_COUNT" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${DGN}Allocated Cores: ${BGN}$CORE_COUNT${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "CPU Cores must be a positive integer (e.g., 1)." 8 58
-    else
-      exit-script
+  if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 1 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $CORE_COUNT ]; then
+      CORE_COUNT="1"
     fi
-  done
+    echo -e "${DGN}Allocated Cores: ${BGN}$CORE_COUNT${CL}"
+  else
+    exit-script
+  fi
 
-  while true; do
-    if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 256 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$RAM_SIZE" ]; then RAM_SIZE="256"; fi
-      if [[ "$RAM_SIZE" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${DGN}Allocated RAM: ${BGN}$RAM_SIZE${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "RAM Size must be a positive integer in MiB (e.g., 256)." 8 58
-    else
-      exit-script
+  if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 256 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $RAM_SIZE ]; then
+      RAM_SIZE="256"
     fi
-  done
+    echo -e "${DGN}Allocated RAM: ${BGN}$RAM_SIZE${CL}"
+  else
+    exit-script
+  fi
 
   if DISK_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" \
     --inputbox "Set Disk Size in GiB (e.g., 1, 2, 4)" 8 58 "1" \
@@ -433,62 +422,41 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a WAN Vlan (leave blank for default)" 8 58 --title "WAN VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$VLAN1" ]; then
-        VLAN1="Default"
-        VLAN=""
-        echo -e "${DGN}Using WAN Vlan: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      if [[ "$VLAN1" =~ ^[0-9]+$ ]] && [ "$VLAN1" -ge 1 ] && [ "$VLAN1" -le 4094 ]; then
-        VLAN=",tag=$VLAN1"
-        echo -e "${DGN}Using WAN Vlan: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "VLAN must be a number between 1 and 4094, or leave blank for default." 8 58
+  if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a WAN Vlan (leave blank for default)" 8 58 --title "WAN VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $VLAN1 ]; then
+      VLAN1="Default"
+      VLAN=""
     else
-      exit-script
+      VLAN=",tag=$VLAN1"
     fi
-  done
+    echo -e "${DGN}Using WAN Vlan: ${BGN}$VLAN1${CL}"
+  else
+    exit-script
+  fi
 
-  while true; do
-    if VLAN2=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a LAN Vlan" 8 58 999 --title "LAN VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$VLAN2" ]; then
-        VLAN2="Default"
-        LAN_VLAN=""
-        echo -e "${DGN}Using LAN Vlan: ${BGN}$VLAN2${CL}"
-        break
-      fi
-      if [[ "$VLAN2" =~ ^[0-9]+$ ]] && [ "$VLAN2" -ge 1 ] && [ "$VLAN2" -le 4094 ]; then
-        LAN_VLAN=",tag=$VLAN2"
-        echo -e "${DGN}Using LAN Vlan: ${BGN}$VLAN2${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "VLAN must be a number between 1 and 4094, or leave blank for default." 8 58
+  if VLAN2=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a LAN Vlan" 8 58 999 --title "LAN VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $VLAN2 ]; then
+      VLAN2="Default"
+      LAN_VLAN=""
     else
-      exit-script
+      LAN_VLAN=",tag=$VLAN2"
     fi
-  done
+    echo -e "${DGN}Using LAN Vlan: ${BGN}$VLAN2${CL}"
+  else
+    exit-script
+  fi
 
-  while true; do
-    if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MTU1" ]; then
-        MTU1="Default"
-        MTU=""
-        echo -e "${DGN}Using Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      if [[ "$MTU1" =~ ^[0-9]+$ ]] && [ "$MTU1" -ge 576 ] && [ "$MTU1" -le 65520 ]; then
-        MTU=",mtu=$MTU1"
-        echo -e "${DGN}Using Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "MTU Size must be a number between 576 and 65520, or leave blank for default." 8 58
+  if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MTU1 ]; then
+      MTU1="Default"
+      MTU=""
     else
-      exit-script
+      MTU=",mtu=$MTU1"
     fi
-  done
+    echo -e "${DGN}Using Interface MTU Size: ${BGN}$MTU1${CL}"
+  else
+    exit-script
+  fi
 
   if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "START VIRTUAL MACHINE" --yesno "Start VM when completed?" 10 58); then
     START_VM="yes"

vm/opnsense-vm.sh

@@ -421,41 +421,30 @@ function advanced_settings() {
     if [ -z "$VM_NAME" ]; then
       HN="OPNsense"
     else
-      HN=$(echo "${VM_NAME,,}" | tr -cs 'a-z0-9-' '-' | sed 's/^-//;s/-$//')
-      if [ "$HN" != "${VM_NAME,,}" ]; then
-        whiptail --backtitle "Proxmox VE Helper Scripts" --title "HOSTNAME ADJUSTED" --msgbox "Invalid characters detected. Hostname has been adjusted to:\n\n  $HN" 10 58
-      fi
+      HN=$(echo ${VM_NAME,,} | tr -d ' ')
     fi
     echo -e "${DGN}Using Hostname: ${BGN}$HN${CL}"
   else
     exit-script
   fi
 
-  while true; do
-    if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 4 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$CORE_COUNT" ]; then CORE_COUNT="4"; fi
-      if [[ "$CORE_COUNT" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${DGN}Allocated Cores: ${BGN}$CORE_COUNT${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "CPU Cores must be a positive integer (e.g., 4)." 8 58
-    else
-      exit-script
+  if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 4 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z "$CORE_COUNT" ]; then
+      CORE_COUNT="2"
     fi
-  done
+    echo -e "${DGN}Allocated Cores: ${BGN}$CORE_COUNT${CL}"
+  else
+    exit-script
+  fi
 
-  while true; do
-    if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 8192 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$RAM_SIZE" ]; then RAM_SIZE="8192"; fi
-      if [[ "$RAM_SIZE" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${DGN}Allocated RAM: ${BGN}$RAM_SIZE${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "RAM Size must be a positive integer in MiB (e.g., 8192)." 8 58
-    else
-      exit-script
+  if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 8192 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $RAM_SIZE ]; then
+      RAM_SIZE="8192"
     fi
-  done
+    echo -e "${DGN}Allocated RAM: ${BGN}$RAM_SIZE${CL}"
+  else
+    exit-script
+  fi
 
   if BRG=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a LAN Bridge" 8 58 vmbr0 --title "LAN BRIDGE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
     if [ -z $BRG ]; then

vm/owncloud-vm.sh

@@ -314,10 +314,7 @@ function advanced_settings() {
       HN="owncloud-vm"
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     else
-      HN=$(echo "${VM_NAME,,}" | tr -cs 'a-z0-9-' '-' | sed 's/^-//;s/-$//')
-      if [ "$HN" != "${VM_NAME,,}" ]; then
-        whiptail --backtitle "Proxmox VE Helper Scripts" --title "HOSTNAME ADJUSTED" --msgbox "Invalid characters detected. Hostname has been adjusted to:\n\n  $HN" 10 58
-      fi
+      HN=$(echo ${VM_NAME,,} | tr -d ' ')
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     fi
   else
@@ -339,31 +336,27 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$CORE_COUNT" ]; then CORE_COUNT="2"; fi
-      if [[ "$CORE_COUNT" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "CPU Cores must be a positive integer (e.g., 2)." 8 58
+  if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $CORE_COUNT ]; then
+      CORE_COUNT="2"
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     else
-      exit-script
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$RAM_SIZE" ]; then RAM_SIZE="2048"; fi
-      if [[ "$RAM_SIZE" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "RAM Size must be a positive integer in MiB (e.g., 2048)." 8 58
+  if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $RAM_SIZE ]; then
+      RAM_SIZE="2048"
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     else
-      exit-script
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if BRG=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Bridge" 8 58 vmbr0 --title "BRIDGE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
     if [ -z $BRG ]; then
@@ -376,61 +369,43 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MAC1" ]; then
-        MAC="$GEN_MAC"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
-        break
-      fi
-      if [[ "$MAC1" =~ ^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$ ]]; then
-        MAC="$MAC1"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "Invalid MAC address format. Use XX:XX:XX:XX:XX:XX (e.g., AA:BB:CC:DD:EE:FF)." 8 58
+  if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MAC1 ]; then
+      MAC="$GEN_MAC"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
     else
-      exit-script
+      MAC="$MAC1"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$VLAN1" ]; then
-        VLAN1="Default"
-        VLAN=""
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      if [[ "$VLAN1" =~ ^[0-9]+$ ]] && [ "$VLAN1" -ge 1 ] && [ "$VLAN1" -le 4094 ]; then
-        VLAN=",tag=$VLAN1"
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "VLAN must be a number between 1 and 4094, or leave blank for default." 8 58
+  if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $VLAN1 ]; then
+      VLAN1="Default"
+      VLAN=""
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     else
-      exit-script
+      VLAN=",tag=$VLAN1"
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MTU1" ]; then
-        MTU1="Default"
-        MTU=""
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      if [[ "$MTU1" =~ ^[0-9]+$ ]] && [ "$MTU1" -ge 576 ] && [ "$MTU1" -le 65520 ]; then
-        MTU=",mtu=$MTU1"
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "MTU Size must be a number between 576 and 65520, or leave blank for default." 8 58
+  if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MTU1 ]; then
+      MTU1="Default"
+      MTU=""
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     else
-      exit-script
+      MTU=",mtu=$MTU1"
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "START VIRTUAL MACHINE" --yesno "Start VM when completed?" 10 58); then
     echo -e "${GATEWAY}${BOLD}${DGN}Start VM when completed: ${BGN}yes${CL}"

vm/pimox-haos-vm.sh

@@ -274,35 +274,26 @@ function advanced_settings() {
     echo -e "${DGN}Using Hostname: ${BGN}$HN${CL}"
   else
     if [ $exitstatus = 0 ]; then
-      HN=$(echo "${VM_NAME,,}" | tr -cs 'a-z0-9-' '-' | sed 's/^-//;s/-$//')
-      if [ "$HN" != "${VM_NAME,,}" ]; then
-        whiptail --backtitle "Proxmox VE Helper Scripts" --title "HOSTNAME ADJUSTED" --msgbox "Invalid characters detected. Hostname has been adjusted to:\n\n  $HN" 10 58
-      fi
+      HN=$(echo ${VM_NAME,,} | tr -d ' ')
       echo -e "${DGN}Using Hostname: ${BGN}$HN${CL}"
     fi
   fi
-  while true; do
-    CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3)
-    exitstatus=$?
-    if [ $exitstatus -ne 0 ]; then exit-script; fi
-    if [ -z "$CORE_COUNT" ]; then CORE_COUNT="2"; fi
-    if [[ "$CORE_COUNT" =~ ^[1-9][0-9]*$ ]]; then
-      echo -e "${DGN}Allocated Cores: ${BGN}$CORE_COUNT${CL}"
-      break
-    fi
-    whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "CPU Cores must be a positive integer (e.g., 2)." 8 58
-  done
-  while true; do
-    RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 4096 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3)
-    exitstatus=$?
-    if [ $exitstatus -ne 0 ]; then exit-script; fi
-    if [ -z "$RAM_SIZE" ]; then RAM_SIZE="4096"; fi
-    if [[ "$RAM_SIZE" =~ ^[1-9][0-9]*$ ]]; then
-      echo -e "${DGN}Allocated RAM: ${BGN}$RAM_SIZE${CL}"
-      break
-    fi
-    whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "RAM Size must be a positive integer in MiB (e.g., 4096)." 8 58
-  done
+  CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3)
+  exitstatus=$?
+  if [ -z $CORE_COUNT ]; then
+    CORE_COUNT="2"
+    echo -e "${DGN}Allocated Cores: ${BGN}$CORE_COUNT${CL}"
+  else
+    if [ $exitstatus = 0 ]; then echo -e "${DGN}Allocated Cores: ${BGN}$CORE_COUNT${CL}"; fi
+  fi
+  RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 4096 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3)
+  exitstatus=$?
+  if [ -z $RAM_SIZE ]; then
+    RAM_SIZE="4096"
+    echo -e "${DGN}Allocated RAM: ${BGN}$RAM_SIZE${CL}"
+  else
+    if [ $exitstatus = 0 ]; then echo -e "${DGN}Allocated RAM: ${BGN}$RAM_SIZE${CL}"; fi
+  fi
   BRG=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Bridge" 8 58 vmbr0 --title "BRIDGE" --cancel-button Exit-Script 3>&1 1>&2 2>&3)
   exitstatus=$?
   if [ -z $BRG ]; then
@@ -311,56 +302,39 @@ function advanced_settings() {
   else
     if [ $exitstatus = 0 ]; then echo -e "${DGN}Using Bridge: ${BGN}$BRG${CL}"; fi
   fi
-  while true; do
-    MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3)
-    exitstatus=$?
-    if [ $exitstatus -ne 0 ]; then exit-script; fi
-    if [ -z "$MAC1" ]; then
-      MAC="$GEN_MAC"
-      echo -e "${DGN}Using MAC Address: ${BGN}$MAC${CL}"
-      break
-    fi
-    if [[ "$MAC1" =~ ^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$ ]]; then
+  MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3)
+  exitstatus=$?
+  if [ -z $MAC1 ]; then
+    MAC="$GEN_MAC"
+    echo -e "${DGN}Using MAC Address: ${BGN}$MAC${CL}"
+  else
+    if [ $exitstatus = 0 ]; then
       MAC="$MAC1"
       echo -e "${DGN}Using MAC Address: ${BGN}$MAC1${CL}"
-      break
     fi
-    whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "Invalid MAC address format. Use XX:XX:XX:XX:XX:XX (e.g., AA:BB:CC:DD:EE:FF)." 8 58
-  done
-  while true; do
-    VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3)
-    exitstatus=$?
-    if [ $exitstatus -ne 0 ]; then exit-script; fi
-    if [ -z "$VLAN1" ]; then
-      VLAN1="Default"
-      VLAN=""
+  fi
+  VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3)
+  exitstatus=$?
+  if [ $exitstatus = 0 ]; then
+    if [ -z $VLAN1 ]; then
+      VLAN1="Default" VLAN=""
       echo -e "${DGN}Using Vlan: ${BGN}$VLAN1${CL}"
-      break
-    fi
-    if [[ "$VLAN1" =~ ^[0-9]+$ ]] && [ "$VLAN1" -ge 1 ] && [ "$VLAN1" -le 4094 ]; then
+    else
       VLAN=",tag=$VLAN1"
       echo -e "${DGN}Using Vlan: ${BGN}$VLAN1${CL}"
-      break
     fi
-    whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "VLAN must be a number between 1 and 4094, or leave blank for default." 8 58
-  done
-  while true; do
-    MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3)
-    exitstatus=$?
-    if [ $exitstatus -ne 0 ]; then exit-script; fi
-    if [ -z "$MTU1" ]; then
-      MTU1="Default"
-      MTU=""
+  fi
+  MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3)
+  exitstatus=$?
+  if [ $exitstatus = 0 ]; then
+    if [ -z $MTU1 ]; then
+      MTU1="Default" MTU=""
       echo -e "${DGN}Using Interface MTU Size: ${BGN}$MTU1${CL}"
-      break
-    fi
-    if [[ "$MTU1" =~ ^[0-9]+$ ]] && [ "$MTU1" -ge 576 ] && [ "$MTU1" -le 65520 ]; then
+    else
       MTU=",mtu=$MTU1"
       echo -e "${DGN}Using Interface MTU Size: ${BGN}$MTU1${CL}"
-      break
     fi
-    whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "MTU Size must be a number between 576 and 65520, or leave blank for default." 8 58
-  done
+  fi
   if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "START VIRTUAL MACHINE" --yesno "Start VM when completed?" 10 58); then
     echo -e "${DGN}Start VM when completed: ${BGN}yes${CL}"
     START_VM="yes"

vm/truenas-vm.sh

@@ -355,10 +355,7 @@ function advanced_settings() {
     if [ -z $VM_NAME ]; then
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     else
-      HN=$(echo "${VM_NAME,,}" | tr -cs 'a-z0-9-' '-' | sed 's/^-//;s/-$//')
-      if [ "$HN" != "${VM_NAME,,}" ]; then
-        whiptail --backtitle "Proxmox VE Helper Scripts" --title "HOSTNAME ADJUSTED" --msgbox "Invalid characters detected. Hostname has been adjusted to:\n\n  $HN" 10 58
-      fi
+      HN=$(echo ${VM_NAME,,} | tr -d ' ')
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     fi
   else
@@ -383,31 +380,27 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 "$CORE_COUNT" --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$CORE_COUNT" ]; then CORE_COUNT="2"; fi
-      if [[ "$CORE_COUNT" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "CPU Cores must be a positive integer (e.g., 2)." 8 58
+  if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 "$CORE_COUNT" --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $CORE_COUNT ]; then
+      CORE_COUNT="2"
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     else
-      exit-script
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 "$RAM_SIZE" --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$RAM_SIZE" ]; then RAM_SIZE="8192"; fi
-      if [[ "$RAM_SIZE" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "RAM Size must be a positive integer in MiB (e.g., 8192)." 8 58
+  if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 "$RAM_SIZE" --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $RAM_SIZE ]; then
+      RAM_SIZE="8192"
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     else
-      exit-script
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if BRG=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Bridge" 8 58 "$BRG" --title "BRIDGE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
     if [ -z $BRG ]; then
@@ -420,61 +413,43 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MAC1" ]; then
-        MAC="$GEN_MAC"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
-        break
-      fi
-      if [[ "$MAC1" =~ ^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$ ]]; then
-        MAC="$MAC1"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "Invalid MAC address format. Use XX:XX:XX:XX:XX:XX (e.g., AA:BB:CC:DD:EE:FF)." 8 58
+  if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MAC1 ]; then
+      MAC="$GEN_MAC"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
     else
-      exit-script
+      MAC="$MAC1"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$VLAN1" ]; then
-        VLAN1="Default"
-        VLAN=""
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      if [[ "$VLAN1" =~ ^[0-9]+$ ]] && [ "$VLAN1" -ge 1 ] && [ "$VLAN1" -le 4094 ]; then
-        VLAN=",tag=$VLAN1"
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "VLAN must be a number between 1 and 4094, or leave blank for default." 8 58
+  if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $VLAN1 ]; then
+      VLAN1="Default"
+      VLAN=""
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     else
-      exit-script
+      VLAN=",tag=$VLAN1"
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MTU1" ]; then
-        MTU1="Default"
-        MTU=""
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      if [[ "$MTU1" =~ ^[0-9]+$ ]] && [ "$MTU1" -ge 576 ] && [ "$MTU1" -le 65520 ]; then
-        MTU=",mtu=$MTU1"
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "MTU Size must be a number between 576 and 65520, or leave blank for default." 8 58
+  if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MTU1 ]; then
+      MTU1="Default"
+      MTU=""
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     else
-      exit-script
+      MTU=",mtu=$MTU1"
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if (whiptail --backtitle "Proxmox VE Helper Scripts" --defaultno --title "IMPORT ONBOARD DISKS" --yesno "Would you like to import onboard disks?" 10 58); then
     echo -e "${DISK}${BOLD}${DGN}Import onboard disks: ${BGN}yes${CL}"

vm/ubuntu2204-vm.sh

@@ -310,10 +310,7 @@ function advanced_settings() {
       HN="ubuntu"
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     else
-      HN=$(echo "${VM_NAME,,}" | tr -cs 'a-z0-9-' '-' | sed 's/^-//;s/-$//')
-      if [ "$HN" != "${VM_NAME,,}" ]; then
-        whiptail --backtitle "Proxmox VE Helper Scripts" --title "HOSTNAME ADJUSTED" --msgbox "Invalid characters detected. Hostname has been adjusted to:\n\n  $HN" 10 58
-      fi
+      HN=$(echo ${VM_NAME,,} | tr -d ' ')
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     fi
   else
@@ -335,31 +332,27 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$CORE_COUNT" ]; then CORE_COUNT="2"; fi
-      if [[ "$CORE_COUNT" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "CPU Cores must be a positive integer (e.g., 2)." 8 58
+  if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $CORE_COUNT ]; then
+      CORE_COUNT="2"
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     else
-      exit-script
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$RAM_SIZE" ]; then RAM_SIZE="2048"; fi
-      if [[ "$RAM_SIZE" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "RAM Size must be a positive integer in MiB (e.g., 2048)." 8 58
+  if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $RAM_SIZE ]; then
+      RAM_SIZE="2048"
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     else
-      exit-script
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if BRG=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Bridge" 8 58 vmbr0 --title "BRIDGE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
     if [ -z $BRG ]; then
@@ -372,61 +365,43 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MAC1" ]; then
-        MAC="$GEN_MAC"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
-        break
-      fi
-      if [[ "$MAC1" =~ ^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$ ]]; then
-        MAC="$MAC1"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "Invalid MAC address format. Use XX:XX:XX:XX:XX:XX (e.g., AA:BB:CC:DD:EE:FF)." 8 58
+  if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MAC1 ]; then
+      MAC="$GEN_MAC"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
     else
-      exit-script
+      MAC="$MAC1"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$VLAN1" ]; then
-        VLAN1="Default"
-        VLAN=""
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      if [[ "$VLAN1" =~ ^[0-9]+$ ]] && [ "$VLAN1" -ge 1 ] && [ "$VLAN1" -le 4094 ]; then
-        VLAN=",tag=$VLAN1"
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "VLAN must be a number between 1 and 4094, or leave blank for default." 8 58
+  if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $VLAN1 ]; then
+      VLAN1="Default"
+      VLAN=""
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     else
-      exit-script
+      VLAN=",tag=$VLAN1"
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MTU1" ]; then
-        MTU1="Default"
-        MTU=""
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      if [[ "$MTU1" =~ ^[0-9]+$ ]] && [ "$MTU1" -ge 576 ] && [ "$MTU1" -le 65520 ]; then
-        MTU=",mtu=$MTU1"
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "MTU Size must be a number between 576 and 65520, or leave blank for default." 8 58
+  if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MTU1 ]; then
+      MTU1="Default"
+      MTU=""
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     else
-      exit-script
+      MTU=",mtu=$MTU1"
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "START VIRTUAL MACHINE" --yesno "Start VM when completed?" 10 58); then
     echo -e "${GATEWAY}${BOLD}${DGN}Start VM when completed: ${BGN}yes${CL}"

vm/ubuntu2404-vm.sh

@@ -313,10 +313,7 @@ function advanced_settings() {
       HN="ubuntu"
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     else
-      HN=$(echo "${VM_NAME,,}" | tr -cs 'a-z0-9-' '-' | sed 's/^-//;s/-$//')
-      if [ "$HN" != "${VM_NAME,,}" ]; then
-        whiptail --backtitle "Proxmox VE Helper Scripts" --title "HOSTNAME ADJUSTED" --msgbox "Invalid characters detected. Hostname has been adjusted to:\n\n  $HN" 10 58
-      fi
+      HN=$(echo ${VM_NAME,,} | tr -d ' ')
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     fi
   else
@@ -338,31 +335,27 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$CORE_COUNT" ]; then CORE_COUNT="2"; fi
-      if [[ "$CORE_COUNT" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "CPU Cores must be a positive integer (e.g., 2)." 8 58
+  if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $CORE_COUNT ]; then
+      CORE_COUNT="2"
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     else
-      exit-script
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$RAM_SIZE" ]; then RAM_SIZE="2048"; fi
-      if [[ "$RAM_SIZE" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "RAM Size must be a positive integer in MiB (e.g., 2048)." 8 58
+  if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $RAM_SIZE ]; then
+      RAM_SIZE="2048"
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     else
-      exit-script
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if BRG=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Bridge" 8 58 vmbr0 --title "BRIDGE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
     if [ -z $BRG ]; then
@@ -375,61 +368,43 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MAC1" ]; then
-        MAC="$GEN_MAC"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
-        break
-      fi
-      if [[ "$MAC1" =~ ^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$ ]]; then
-        MAC="$MAC1"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "Invalid MAC address format. Use XX:XX:XX:XX:XX:XX (e.g., AA:BB:CC:DD:EE:FF)." 8 58
+  if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MAC1 ]; then
+      MAC="$GEN_MAC"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
     else
-      exit-script
+      MAC="$MAC1"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$VLAN1" ]; then
-        VLAN1="Default"
-        VLAN=""
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      if [[ "$VLAN1" =~ ^[0-9]+$ ]] && [ "$VLAN1" -ge 1 ] && [ "$VLAN1" -le 4094 ]; then
-        VLAN=",tag=$VLAN1"
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "VLAN must be a number between 1 and 4094, or leave blank for default." 8 58
+  if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $VLAN1 ]; then
+      VLAN1="Default"
+      VLAN=""
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     else
-      exit-script
+      VLAN=",tag=$VLAN1"
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MTU1" ]; then
-        MTU1="Default"
-        MTU=""
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      if [[ "$MTU1" =~ ^[0-9]+$ ]] && [ "$MTU1" -ge 576 ] && [ "$MTU1" -le 65520 ]; then
-        MTU=",mtu=$MTU1"
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "MTU Size must be a number between 576 and 65520, or leave blank for default." 8 58
+  if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MTU1 ]; then
+      MTU1="Default"
+      MTU=""
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     else
-      exit-script
+      MTU=",mtu=$MTU1"
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "START VIRTUAL MACHINE" --yesno "Start VM when completed?" 10 58); then
     echo -e "${GATEWAY}${BOLD}${DGN}Start VM when completed: ${BGN}yes${CL}"

vm/ubuntu2504-vm.sh

@@ -312,10 +312,7 @@ function advanced_settings() {
       HN="ubuntu"
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     else
-      HN=$(echo "${VM_NAME,,}" | tr -cs 'a-z0-9-' '-' | sed 's/^-//;s/-$//')
-      if [ "$HN" != "${VM_NAME,,}" ]; then
-        whiptail --backtitle "Proxmox VE Helper Scripts" --title "HOSTNAME ADJUSTED" --msgbox "Invalid characters detected. Hostname has been adjusted to:\n\n  $HN" 10 58
-      fi
+      HN=$(echo ${VM_NAME,,} | tr -d ' ')
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     fi
   else
@@ -337,31 +334,27 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$CORE_COUNT" ]; then CORE_COUNT="2"; fi
-      if [[ "$CORE_COUNT" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "CPU Cores must be a positive integer (e.g., 2)." 8 58
+  if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $CORE_COUNT ]; then
+      CORE_COUNT="2"
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     else
-      exit-script
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$RAM_SIZE" ]; then RAM_SIZE="2048"; fi
-      if [[ "$RAM_SIZE" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "RAM Size must be a positive integer in MiB (e.g., 2048)." 8 58
+  if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $RAM_SIZE ]; then
+      RAM_SIZE="2048"
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     else
-      exit-script
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if BRG=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Bridge" 8 58 vmbr0 --title "BRIDGE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
     if [ -z $BRG ]; then
@@ -374,61 +367,43 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MAC1" ]; then
-        MAC="$GEN_MAC"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
-        break
-      fi
-      if [[ "$MAC1" =~ ^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$ ]]; then
-        MAC="$MAC1"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "Invalid MAC address format. Use XX:XX:XX:XX:XX:XX (e.g., AA:BB:CC:DD:EE:FF)." 8 58
+  if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MAC1 ]; then
+      MAC="$GEN_MAC"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
     else
-      exit-script
+      MAC="$MAC1"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$VLAN1" ]; then
-        VLAN1="Default"
-        VLAN=""
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      if [[ "$VLAN1" =~ ^[0-9]+$ ]] && [ "$VLAN1" -ge 1 ] && [ "$VLAN1" -le 4094 ]; then
-        VLAN=",tag=$VLAN1"
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "VLAN must be a number between 1 and 4094, or leave blank for default." 8 58
+  if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $VLAN1 ]; then
+      VLAN1="Default"
+      VLAN=""
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     else
-      exit-script
+      VLAN=",tag=$VLAN1"
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MTU1" ]; then
-        MTU1="Default"
-        MTU=""
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      if [[ "$MTU1" =~ ^[0-9]+$ ]] && [ "$MTU1" -ge 576 ] && [ "$MTU1" -le 65520 ]; then
-        MTU=",mtu=$MTU1"
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "MTU Size must be a number between 576 and 65520, or leave blank for default." 8 58
+  if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MTU1 ]; then
+      MTU1="Default"
+      MTU=""
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     else
-      exit-script
+      MTU=",mtu=$MTU1"
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "START VIRTUAL MACHINE" --yesno "Start VM when completed?" 10 58); then
     echo -e "${GATEWAY}${BOLD}${DGN}Start VM when completed: ${BGN}yes${CL}"

vm/umbrel-os-vm.sh

@@ -373,10 +373,7 @@ function advanced_settings() {
       HN="umbrelos"
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     else
-      HN=$(echo "${VM_NAME,,}" | tr -cs 'a-z0-9-' '-' | sed 's/^-//;s/-$//')
-      if [ "$HN" != "${VM_NAME,,}" ]; then
-        whiptail --backtitle "Proxmox VE Helper Scripts" --title "HOSTNAME ADJUSTED" --msgbox "Invalid characters detected. Hostname has been adjusted to:\n\n  $HN" 10 58
-      fi
+      HN=$(echo ${VM_NAME,,} | tr -d ' ')
       echo -e "${HOSTNAME}${BOLD}${DGN}Hostname: ${BGN}$HN${CL}"
     fi
   else
@@ -401,31 +398,27 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$CORE_COUNT" ]; then CORE_COUNT="2"; fi
-      if [[ "$CORE_COUNT" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "CPU Cores must be a positive integer (e.g., 2)." 8 58
+  if CORE_COUNT=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate CPU Cores" 8 58 2 --title "CORE COUNT" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $CORE_COUNT ]; then
+      CORE_COUNT="2"
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     else
-      exit-script
+      echo -e "${CPUCORE}${BOLD}${DGN}CPU Cores: ${BGN}$CORE_COUNT${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$RAM_SIZE" ]; then RAM_SIZE="2048"; fi
-      if [[ "$RAM_SIZE" =~ ^[1-9][0-9]*$ ]]; then
-        echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "RAM Size must be a positive integer in MiB (e.g., 2048)." 8 58
+  if RAM_SIZE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Allocate RAM in MiB" 8 58 2048 --title "RAM" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $RAM_SIZE ]; then
+      RAM_SIZE="2048"
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     else
-      exit-script
+      echo -e "${RAMSIZE}${BOLD}${DGN}RAM Size: ${BGN}$RAM_SIZE${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if BRG=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Bridge" 8 58 vmbr0 --title "BRIDGE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
     if [ -z $BRG ]; then
@@ -438,61 +431,43 @@ function advanced_settings() {
     exit-script
   fi
 
-  while true; do
-    if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MAC1" ]; then
-        MAC="$GEN_MAC"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
-        break
-      fi
-      if [[ "$MAC1" =~ ^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$ ]]; then
-        MAC="$MAC1"
-        echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "Invalid MAC address format. Use XX:XX:XX:XX:XX:XX (e.g., AA:BB:CC:DD:EE:FF)." 8 58
+  if MAC1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a MAC Address" 8 58 $GEN_MAC --title "MAC ADDRESS" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MAC1 ]; then
+      MAC="$GEN_MAC"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC${CL}"
     else
-      exit-script
+      MAC="$MAC1"
+      echo -e "${MACADDRESS}${BOLD}${DGN}MAC Address: ${BGN}$MAC1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$VLAN1" ]; then
-        VLAN1="Default"
-        VLAN=""
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      if [[ "$VLAN1" =~ ^[0-9]+$ ]] && [ "$VLAN1" -ge 1 ] && [ "$VLAN1" -le 4094 ]; then
-        VLAN=",tag=$VLAN1"
-        echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "VLAN must be a number between 1 and 4094, or leave blank for default." 8 58
+  if VLAN1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set a Vlan(leave blank for default)" 8 58 --title "VLAN" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $VLAN1 ]; then
+      VLAN1="Default"
+      VLAN=""
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     else
-      exit-script
+      VLAN=",tag=$VLAN1"
+      echo -e "${VLANTAG}${BOLD}${DGN}VLAN: ${BGN}$VLAN1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
-  while true; do
-    if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
-      if [ -z "$MTU1" ]; then
-        MTU1="Default"
-        MTU=""
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      if [[ "$MTU1" =~ ^[0-9]+$ ]] && [ "$MTU1" -ge 576 ] && [ "$MTU1" -le 65520 ]; then
-        MTU=",mtu=$MTU1"
-        echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
-        break
-      fi
-      whiptail --backtitle "Proxmox VE Helper Scripts" --title "INVALID INPUT" --msgbox "MTU Size must be a number between 576 and 65520, or leave blank for default." 8 58
+  if MTU1=$(whiptail --backtitle "Proxmox VE Helper Scripts" --inputbox "Set Interface MTU Size (leave blank for default)" 8 58 --title "MTU SIZE" --cancel-button Exit-Script 3>&1 1>&2 2>&3); then
+    if [ -z $MTU1 ]; then
+      MTU1="Default"
+      MTU=""
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     else
-      exit-script
+      MTU=",mtu=$MTU1"
+      echo -e "${DEFAULT}${BOLD}${DGN}Interface MTU Size: ${BGN}$MTU1${CL}"
     fi
-  done
+  else
+    exit-script
+  fi
 
   if (whiptail --backtitle "Proxmox VE Helper Scripts" --title "START VIRTUAL MACHINE" --yesno "Start VM when completed?" 10 58); then
     echo -e "${GATEWAY}${BOLD}${DGN}Start VM when completed: ${BGN}yes${CL}"