Update CHANGELOG.md

* fix(tdarr): use curl_with_retry and verify binaries before enabling service

Tdarr_Updater downloads the actual server/node binaries from tdarr.io at
runtime. If tdarr.io is blocked by local DNS (e.g. OPNsense OISD blocklists),
the updater exits silently with code 0, leaving no binaries on disk. The
subsequent systemctl enable then fails with 'Operation not permitted' (exit 1)
because the ExecStart paths don't exist.

Changes:
- Replace bare curl with curl_with_retry for versions.json and Tdarr_Updater.zip
  downloads to gain retry logic, DNS pre-check and exponential backoff
- Add msg_info before Tdarr_Updater run so users see this step in the log
- Check that Tdarr_Server and Tdarr_Node binaries exist after the updater
  runs; fail immediately with a clear message pointing to tdarr.io connectivity
  instead of letting systemctl fail with a confusing 'Operation not permitted'

Fixes: #13030

* Improve Tdarr installer error handling

Refine post-update validation and failure behavior in tdarr-install.sh: remove a redundant status message, simplify the updater check to only require the Tdarr_Server binary, and replace the previous fatal path with msg_error plus an explicit exit 250. This makes failures (for example when tdarr.io is blocked by local DNS) clearer and avoids false negatives from the Tdarr_Node existence check.

* Use curl_with_retry and handle updater failure

Replace direct curl calls with curl_with_retry for fetching versions.json and downloading Tdarr_Updater.zip to improve network reliability. Add a post-update check that verifies /opt/tdarr/Tdarr_Server/Tdarr_Server exists; if missing, log an error suggesting possible DNS blocking and exit with code 250. Minor cleanup of updater artifacts remains unchanged.

* Reorder hwaccel setup and adjust GPU group usermod

Move setup_hwaccel invocations in emby, jellyfin, ollama, and plex installers to occur after package installation/configuration so GPU drivers/repos are present before enabling hardware acceleration. Update _setup_gpu_permissions to call usermod directly (remove $STD wrapper) when adding service users to render/video groups. Includes minor whitespace/ordering cleanups in the installer scripts.

CHANGELOG.md

@@ -423,16 +423,27 @@ Exercise vigilance regarding copycat or coat-tailing sites that seek to exploit
 
 </details>
 
-## 2026-03-18
-
-### 🆕 New Scripts
-
-  - Split-Pro ([#12975](https://github.com/community-scripts/ProxmoxVE/pull/12975))
+## 2026-03-19
 
 ### 🚀 Updated Scripts
 
   - #### 🐞 Bug Fixes
 
+    - core: reorder hwaccel setup and adjust GPU group usermod [@MickLesk](https://github.com/MickLesk) ([#13072](https://github.com/community-scripts/ProxmoxVE/pull/13072))
+
+## 2026-03-18
+
+### 🆕 New Scripts
+
+  - Alpine-Ntfy [@MickLesk](https://github.com/MickLesk) ([#13048](https://github.com/community-scripts/ProxmoxVE/pull/13048))
+- Split-Pro ([#12975](https://github.com/community-scripts/ProxmoxVE/pull/12975))
+
+### 🚀 Updated Scripts
+
+  - #### 🐞 Bug Fixes
+
+    - Tdarr: use curl_with_retry and correct exit code [@MickLesk](https://github.com/MickLesk) ([#13060](https://github.com/community-scripts/ProxmoxVE/pull/13060))
+    - reitti: fix: v4 [@CrazyWolf13](https://github.com/CrazyWolf13) ([#13039](https://github.com/community-scripts/ProxmoxVE/pull/13039))
     - Paperless-NGX: increase default RAM to 3GB [@MickLesk](https://github.com/MickLesk) ([#13018](https://github.com/community-scripts/ProxmoxVE/pull/13018))
     - Plex: restart service after update to apply new version [@MickLesk](https://github.com/MickLesk) ([#13017](https://github.com/community-scripts/ProxmoxVE/pull/13017))
 
@@ -443,6 +454,7 @@ Exercise vigilance regarding copycat or coat-tailing sites that seek to exploit
 
   - #### 🔧 Refactor
 
+    - Podman: replace deprecated commands with Quadlets [@MickLesk](https://github.com/MickLesk) ([#13052](https://github.com/community-scripts/ProxmoxVE/pull/13052))
     - Refactor: Jellyfin repo, ffmpeg package and symlinks [@MickLesk](https://github.com/MickLesk) ([#13045](https://github.com/community-scripts/ProxmoxVE/pull/13045))
     - pve-scripts-local: Increase default disk size from 4GB to 10GB [@MickLesk](https://github.com/MickLesk) ([#13009](https://github.com/community-scripts/ProxmoxVE/pull/13009))
 

ct/alpine-ntfy.sh

@@ -0,0 +1,50 @@
+#!/usr/bin/env bash
+source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/build.func)
+
+# Copyright (c) 2021-2026 community-scripts ORG
+# Author: cobalt (cobaltgit)
+# License: MIT | https://github.com/community-scripts/ProxmoxVED/raw/main/LICENSE
+# Source: https://ntfy.sh/
+
+APP="Alpine-ntfy"
+var_tags="${var_tags:-notification}"
+var_cpu="${var_cpu:-1}"
+var_ram="${var_ram:-256}"
+var_disk="${var_disk:-2}"
+var_os="${var_os:-alpine}"
+var_version="${var_version:-3.23}"
+var_unprivileged="${var_unprivileged:-1}"
+
+header_info "$APP"
+variables
+color
+catch_errors
+
+function update_script() {
+  header_info
+  check_container_storage
+  check_container_resources
+  if [[ ! -d /etc/ntfy ]]; then
+    msg_error "No ${APP} Installation Found!"
+    exit
+  fi
+  msg_info "Updating ntfy LXC"
+  $STD apk -U upgrade
+  setcap 'cap_net_bind_service=+ep' /usr/bin/ntfy
+  msg_ok "Updated ntfy LXC"
+
+  msg_info "Restarting ntfy"
+  rc-service ntfy restart
+  msg_ok "Restarted ntfy"
+  msg_ok "Updated successfully!"
+  exit
+}
+
+start
+build_container
+description
+
+msg_ok "Completed successfully!\n"
+echo -e "${CREATING}${GN}${APP} setup has been successfully initialized!${CL}"
+echo -e "${INFO}${YW} Access it using the following URL:${CL}"
+echo -e "${TAB}${GATEWAY}${BGN}http://${IP}${CL}"

ct/headers/alpine-ntfy

@@ -0,0 +1,6 @@
+    ___    __      _                        __  ____     
+   /   |  / /___  (_)___  ___        ____  / /_/ __/_  __
+  / /| | / / __ \/ / __ \/ _ \______/ __ \/ __/ /_/ / / /
+ / ___ |/ / /_/ / / / / /  __/_____/ / / / /_/ __/ /_/ / 
+/_/  |_/_/ .___/_/_/ /_/\___/     /_/ /_/\__/_/  \__, /  
+        /_/                                     /____/   

ct/podman-homeassistant.sh

@@ -23,7 +23,7 @@ function update_script() {
   header_info
   check_container_storage
   check_container_resources
-  if [[ ! -f /etc/systemd/system/homeassistant.service ]]; then
+  if [[ ! -f /etc/containers/systemd/homeassistant.container ]]; then
     msg_error "No ${APP} Installation Found!"
     exit
   fi

ct/reitti.sh

@@ -89,17 +89,49 @@ EOF
     msg_ok "Started Service"
     msg_ok "Updated successfully!"
   fi
+  
   if check_for_gh_release "photon" "komoot/photon"; then
+    if [[ -f "$HOME/.photon" ]] && [[ "$(cat "$HOME/.photon")" == 0.7 ]]; then
+      CURRENT_VERSION="$(<"$HOME/.photon")"
+      echo
+      echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
+      echo "Photon v1 upgrade detected (breaking change)"
+      echo
+      echo "Your current version: $CURRENT_VERSION"
+      echo
+      echo "Photon v1 requires a manual migration before updating."
+      echo
+      echo "You need to:"
+      echo "  1. Remove existing geocoding data (not actual reitti data):"
+      echo "     rm -rf /opt/photon_data"
+      echo
+      echo "  2. Follow the inial setup guide again:"
+      echo "     https://github.com/community-scripts/ProxmoxVE/discussions/8737"
+      echo
+      echo "  3. Re-download and import Photon data for v1"
+      echo
+      read -rp "Do you want to continue anyway? (y/N): " CONTINUE
+      echo
+        
+      if [[ ! "$CONTINUE" =~ ^[Yy]$ ]]; then
+        msg_info "Migration required. Update cancelled."
+        exit 0
+      fi
+        
+      msg_warn "Continuing without migration may break Photon in the future!"
+    fi
+  
     msg_info "Stopping Service"
     systemctl stop photon
     msg_ok "Stopped Service"
 
     rm -f /opt/photon/photon.jar
-    USE_ORIGINAL_FILENAME="true" fetch_and_deploy_gh_release "photon" "komoot/photon" "singlefile" "latest" "/opt/photon" "photon-0*.jar"
+    USE_ORIGINAL_FILENAME="true" fetch_and_deploy_gh_release "photon" "komoot/photon" "singlefile" "latest" "/opt/photon" "photon-*.jar"
     mv /opt/photon/photon-*.jar /opt/photon/photon.jar
 
     msg_info "Starting Service"
     systemctl start photon
+    systemctl restart nginx
     msg_ok "Started Service"
     msg_ok "Updated successfully!"
   fi

ct/tdarr.sh

@@ -33,12 +33,16 @@ function update_script() {
   $STD apt upgrade -y
   rm -rf /opt/tdarr/Tdarr_Updater
   cd /opt/tdarr
-  RELEASE=$(curl -fsSL https://f000.backblazeb2.com/file/tdarrs/versions.json | grep -oP '(?<="Tdarr_Updater": ")[^"]+' | grep linux_x64 | head -n 1)
-  curl -fsSL "$RELEASE" -o Tdarr_Updater.zip
+  RELEASE=$(curl_with_retry "https://f000.backblazeb2.com/file/tdarrs/versions.json" "-" | grep -oP '(?<="Tdarr_Updater": ")[^"]+' | grep linux_x64 | head -n 1)
+  curl_with_retry "$RELEASE" "Tdarr_Updater.zip"
   $STD unzip Tdarr_Updater.zip
   chmod +x Tdarr_Updater
   $STD ./Tdarr_Updater
   rm -rf /opt/tdarr/Tdarr_Updater.zip
+  [[ -f /opt/tdarr/Tdarr_Server/Tdarr_Server ]] || {
+    msg_error "Tdarr_Updater failed — tdarr.io may be blocked by local DNS"
+    exit 250
+  }
   msg_ok "Updated Tdarr"
   msg_ok "Updated successfully!"
   exit

install/alpine-ntfy-install.sh

@@ -0,0 +1,25 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2021-2026 community-scripts ORG
+# Author: cobalt (cobaltgit)
+# License: MIT | https://github.com/community-scripts/ProxmoxVED/raw/main/LICENSE
+# Source: https://ntfy.sh/
+
+source /dev/stdin <<<"$FUNCTIONS_FILE_PATH"
+color
+verb_ip6
+catch_errors
+setting_up_container
+network_check
+update_os
+
+msg_info "Installing ntfy"
+$STD apk add --no-cache ntfy ntfy-openrc libcap
+sed -i '/^listen-http/s/^\(.*\)$/#\1\n/' /etc/ntfy/server.yml
+setcap 'cap_net_bind_service=+ep' /usr/bin/ntfy
+$STD rc-update add ntfy default
+$STD service ntfy start
+msg_ok "Installed ntfy"
+
+motd_ssh
+customize

install/emby-install.sh

@@ -13,10 +13,10 @@ setting_up_container
 network_check
 update_os
 
-setup_hwaccel "emby"
-
 fetch_and_deploy_gh_release "emby" "MediaBrowser/Emby.Releases" "binary"
 
+setup_hwaccel "emby"
+
 motd_ssh
 customize
 cleanup_lxc

install/jellyfin-install.sh

@@ -14,7 +14,6 @@ network_check
 update_os
 
 msg_custom "ℹ️" "${GN}" "If NVIDIA GPU passthrough is detected, you'll be asked whether to install drivers in the container"
-setup_hwaccel "jellyfin"
 
 msg_info "Installing Dependencies"
 ensure_dependencies libjemalloc2
@@ -37,6 +36,8 @@ ln -sf /usr/lib/jellyfin-ffmpeg/ffmpeg /usr/bin/ffmpeg
 ln -sf /usr/lib/jellyfin-ffmpeg/ffprobe /usr/bin/ffprobe
 msg_ok "Installed Jellyfin"
 
+setup_hwaccel "jellyfin"
+
 msg_info "Configuring Jellyfin"
 # Configure log rotation to prevent disk fill (keeps fail2ban compatibility) (PR: #1690 / Issue: #11224)
 cat <<EOF >/etc/logrotate.d/jellyfin

install/ollama-install.sh

@@ -42,8 +42,6 @@ EOF
 $STD apt update
 msg_ok "Set up Intel® Repositories"
 
-setup_hwaccel "ollama"
-
 msg_info "Installing Intel® Level Zero"
 # Debian 13+ has newer Level Zero packages in system repos that conflict with Intel repo packages
 if is_debian && [[ "$(get_os_version_major)" -ge 13 ]]; then
@@ -92,6 +90,8 @@ fi
 $STD usermod -aG ollama $(id -u -n)
 msg_ok "Created ollama User and adjusted Groups"
 
+setup_hwaccel "ollama"
+
 msg_info "Creating Service"
 cat <<EOF >/etc/systemd/system/ollama.service
 [Unit]

install/plex-install.sh

@@ -13,8 +13,6 @@ setting_up_container
 network_check
 update_os
 
-setup_hwaccel "plex"
-
 msg_info "Setting Up Plex Media Server Repository"
 setup_deb822_repo \
   "plexmediaserver" \
@@ -28,6 +26,8 @@ msg_info "Installing Plex Media Server"
 $STD apt install -y plexmediaserver
 msg_ok "Installed Plex Media Server"
 
+setup_hwaccel "plex"
+
 motd_ssh
 customize
 cleanup_lxc

install/podman-homeassistant-install.sh

@@ -45,32 +45,58 @@ systemctl enable -q --now podman.socket
 echo -e 'unqualified-search-registries=["docker.io"]' >>/etc/containers/registries.conf
 msg_ok "Installed Podman"
 
+mkdir -p /etc/containers/systemd
+
 read -r -p "${TAB3}Would you like to add Portainer? <y/N> " prompt
 if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
   msg_info "Installing Portainer $PORTAINER_LATEST_VERSION"
   podman volume create portainer_data >/dev/null
-  $STD podman run -d \
-    -p 8000:8000 \
-    -p 9443:9443 \
-    --name=portainer \
-    --restart=always \
-    -v /run/podman/podman.sock:/var/run/docker.sock \
-    -v portainer_data:/data \
-    portainer/portainer-ce:latest
+  cat <<EOF >/etc/containers/systemd/portainer.container
+[Unit]
+Description=Portainer Container
+After=network-online.target
+
+[Container]
+Image=docker.io/portainer/portainer-ce:latest
+ContainerName=portainer
+PublishPort=8000:8000
+PublishPort=9443:9443
+Volume=/run/podman/podman.sock:/var/run/docker.sock
+Volume=portainer_data:/data
+
+[Service]
+Restart=always
+
+[Install]
+WantedBy=default.target multi-user.target
+EOF
+  systemctl daemon-reload
+  $STD systemctl start portainer
   msg_ok "Installed Portainer $PORTAINER_LATEST_VERSION"
 else
   read -r -p "${TAB3}Would you like to add the Portainer Agent? <y/N> " prompt
   if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
     msg_info "Installing Portainer agent $PORTAINER_AGENT_LATEST_VERSION"
-    podman volume create temp >/dev/null
-    podman volume remove temp >/dev/null
-    $STD podman run -d \
-      -p 9001:9001 \
-      --name portainer_agent \
-      --restart=always \
-      -v /run/podman/podman.sock:/var/run/docker.sock \
-      -v /var/lib/containers/storage/volumes:/var/lib/docker/volumes \
-      portainer/agent
+    cat <<EOF >/etc/containers/systemd/portainer-agent.container
+[Unit]
+Description=Portainer Agent Container
+After=network-online.target
+
+[Container]
+Image=docker.io/portainer/agent:latest
+ContainerName=portainer_agent
+PublishPort=9001:9001
+Volume=/run/podman/podman.sock:/var/run/docker.sock
+Volume=/var/lib/containers/storage/volumes:/var/lib/docker/volumes
+
+[Service]
+Restart=always
+
+[Install]
+WantedBy=default.target multi-user.target
+EOF
+    systemctl daemon-reload
+    $STD systemctl start portainer-agent
     msg_ok "Installed Portainer Agent $PORTAINER_AGENT_LATEST_VERSION"
   fi
 fi
@@ -81,19 +107,29 @@ msg_ok "Pulled Home Assistant Image"
 
 msg_info "Installing Home Assistant"
 $STD podman volume create hass_config
-$STD podman run -d \
-  --name homeassistant \
-  --restart unless-stopped \
-  -v /dev:/dev \
-  -v hass_config:/config \
-  -v /etc/localtime:/etc/localtime:ro \
-  -v /etc/timezone:/etc/timezone:ro \
-  --net=host \
-  homeassistant/home-assistant:stable
-podman generate systemd \
-  --new --name homeassistant \
-  >/etc/systemd/system/homeassistant.service
-systemctl enable -q --now homeassistant
+cat <<EOF >/etc/containers/systemd/homeassistant.container
+[Unit]
+Description=Home Assistant Container
+After=network-online.target
+
+[Container]
+Image=docker.io/homeassistant/home-assistant:stable
+ContainerName=homeassistant
+Volume=/dev:/dev
+Volume=hass_config:/config
+Volume=/etc/localtime:/etc/localtime:ro
+Volume=/etc/timezone:/etc/timezone:ro
+Network=host
+
+[Service]
+Restart=always
+TimeoutStartSec=300
+
+[Install]
+WantedBy=default.target multi-user.target
+EOF
+systemctl daemon-reload
+$STD systemctl start homeassistant
 msg_ok "Installed Home Assistant"
 
 motd_ssh

install/podman-install.sh

@@ -45,32 +45,58 @@ systemctl enable -q --now podman.socket
 echo -e 'unqualified-search-registries=["docker.io"]' >>/etc/containers/registries.conf
 msg_ok "Installed Podman"
 
+mkdir -p /etc/containers/systemd
+
 read -r -p "${TAB3}Would you like to add Portainer? <y/N> " prompt
 if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
   msg_info "Installing Portainer $PORTAINER_LATEST_VERSION"
   podman volume create portainer_data >/dev/null
-  $STD podman run -d \
-    -p 8000:8000 \
-    -p 9443:9443 \
-    --name=portainer \
-    --restart=always \
-    -v /run/podman/podman.sock:/var/run/docker.sock \
-    -v portainer_data:/data \
-    portainer/portainer-ce:latest
+  cat <<EOF >/etc/containers/systemd/portainer.container
+[Unit]
+Description=Portainer Container
+After=network-online.target
+
+[Container]
+Image=docker.io/portainer/portainer-ce:latest
+ContainerName=portainer
+PublishPort=8000:8000
+PublishPort=9443:9443
+Volume=/run/podman/podman.sock:/var/run/docker.sock
+Volume=portainer_data:/data
+
+[Service]
+Restart=always
+
+[Install]
+WantedBy=default.target multi-user.target
+EOF
+  systemctl daemon-reload
+  $STD systemctl start portainer
   msg_ok "Installed Portainer $PORTAINER_LATEST_VERSION"
 else
   read -r -p "${TAB3}Would you like to add the Portainer Agent? <y/N> " prompt
   if [[ ${prompt,,} =~ ^(y|yes)$ ]]; then
     msg_info "Installing Portainer agent $PORTAINER_AGENT_LATEST_VERSION"
-    podman volume create temp >/dev/null
-    podman volume remove temp >/dev/null
-    $STD podman run -d \
-      -p 9001:9001 \
-      --name portainer_agent \
-      --restart=always \
-      -v /run/podman/podman.sock:/var/run/docker.sock \
-      -v /var/lib/containers/storage/volumes:/var/lib/docker/volumes \
-      portainer/agent
+    cat <<EOF >/etc/containers/systemd/portainer-agent.container
+[Unit]
+Description=Portainer Agent Container
+After=network-online.target
+
+[Container]
+Image=docker.io/portainer/agent:latest
+ContainerName=portainer_agent
+PublishPort=9001:9001
+Volume=/run/podman/podman.sock:/var/run/docker.sock
+Volume=/var/lib/containers/storage/volumes:/var/lib/docker/volumes
+
+[Service]
+Restart=always
+
+[Install]
+WantedBy=default.target multi-user.target
+EOF
+    systemctl daemon-reload
+    $STD systemctl start portainer-agent
     msg_ok "Installed Portainer Agent $PORTAINER_AGENT_LATEST_VERSION"
   fi
 fi

install/reitti-install.sh

@@ -44,7 +44,7 @@ msg_ok "Configured RabbitMQ"
 
 USE_ORIGINAL_FILENAME="true" fetch_and_deploy_gh_release "reitti" "dedicatedcode/reitti" "singlefile" "latest" "/opt/reitti" "reitti-app.jar"
 mv /opt/reitti/reitti-*.jar /opt/reitti/reitti.jar
-USE_ORIGINAL_FILENAME="true" fetch_and_deploy_gh_release "photon" "komoot/photon" "singlefile" "latest" "/opt/photon" "photon-0*.jar"
+USE_ORIGINAL_FILENAME="true" fetch_and_deploy_gh_release "photon" "komoot/photon" "singlefile" "latest" "/opt/photon" "photon-*.jar"
 mv /opt/photon/photon-*.jar /opt/photon/photon.jar
 
 msg_info "Installing Nginx Tile Cache"

install/tdarr-install.sh

@@ -20,12 +20,16 @@ msg_ok "Installed Dependencies"
 msg_info "Installing Tdarr"
 mkdir -p /opt/tdarr
 cd /opt/tdarr
-RELEASE=$(curl -fsSL https://f000.backblazeb2.com/file/tdarrs/versions.json | grep -oP '(?<="Tdarr_Updater": ")[^"]+' | grep linux_x64 | head -n 1)
-curl -fsSL "$RELEASE" -o Tdarr_Updater.zip
+RELEASE=$(curl_with_retry "https://f000.backblazeb2.com/file/tdarrs/versions.json" "-" | grep -oP '(?<="Tdarr_Updater": ")[^"]+' | grep linux_x64 | head -n 1)
+curl_with_retry "$RELEASE" "Tdarr_Updater.zip"
 $STD unzip Tdarr_Updater.zip
 chmod +x Tdarr_Updater
 $STD ./Tdarr_Updater
 rm -rf /opt/tdarr/Tdarr_Updater.zip
+[[ -f /opt/tdarr/Tdarr_Server/Tdarr_Server ]] || {
+  msg_error "Tdarr_Updater failed — tdarr.io may be blocked by local DNS"
+  exit 250
+}
 msg_ok "Installed Tdarr"
 
 setup_hwaccel

misc/tools.func

@@ -5213,8 +5213,8 @@ _setup_gpu_permissions() {
 
   # Add service user to render and video groups for GPU hardware acceleration
   if [[ -n "$service_user" ]]; then
-    $STD usermod -aG render "$service_user" 2>/dev/null || true
-    $STD usermod -aG video "$service_user" 2>/dev/null || true
+    usermod -aG render "$service_user" 2>/dev/null || true
+    usermod -aG video "$service_user" 2>/dev/null || true
   fi
 }