Update nginx-ui.sh

The previous install script started nginx-ui for 3 seconds, stopped it,
and ran reset-password to create an admin user. This caused:
- Race condition: the internal setup wizard could trigger during the brief
  start window, conflicting with the reset-password approach
- Admin users unable to login after the setup wizard fired
- Settings lockup due to overloaded app.ini with hardcoded nginx paths
  that conflict with UI-managed settings

Changes:
- Remove start/stop/reset-password hack from install script
- Simplify app.ini to match upstream defaults (minimal config)
- Let users complete the natural setup wizard on first visit
- Update JSON: remove default credentials, add setup wizard note
- Add setup wizard hint to CT script output

The setup wizard properly handles admin account creation and ACME email
configuration, which are both needed for full functionality.

Ref: ProxmoxVED#1408

CHANGELOG.md

@@ -407,38 +407,9 @@ Exercise vigilance regarding copycat or coat-tailing sites that seek to exploit
 
   - #### 🐞 Bug Fixes
 
-    - Umlautadaptarr: use release appsettings.json instead of hardcoded copy [@MickLesk](https://github.com/MickLesk) ([#11725](https://github.com/community-scripts/ProxmoxVE/pull/11725))
     - tracearr: prepare for next stable release [@durzo](https://github.com/durzo) ([#11673](https://github.com/community-scripts/ProxmoxVE/pull/11673))
     - PeaNUT: symlink server.js after update [@vhsdream](https://github.com/vhsdream) ([#11696](https://github.com/community-scripts/ProxmoxVE/pull/11696))
 
-  - #### ✨ New Features
-
-    - remove whiptail from update scripts for unattended update support [@MickLesk](https://github.com/MickLesk) ([#11712](https://github.com/community-scripts/ProxmoxVE/pull/11712))
-
-  - #### 🔧 Refactor
-
-    - Refactor: FileFlows [@tremor021](https://github.com/tremor021) ([#11108](https://github.com/community-scripts/ProxmoxVE/pull/11108))
-    - Refactor: wger [@MickLesk](https://github.com/MickLesk) ([#11722](https://github.com/community-scripts/ProxmoxVE/pull/11722))
-    - Nginx-UI: better User Handling | ACME [@MickLesk](https://github.com/MickLesk) ([#11715](https://github.com/community-scripts/ProxmoxVE/pull/11715))
-    - NginxProxymanager: use better-sqlite3 [@MickLesk](https://github.com/MickLesk) ([#11708](https://github.com/community-scripts/ProxmoxVE/pull/11708))
-
-### 💾 Core
-
-  - #### 🔧 Refactor
-
-    - hwaccel: add libmfx-gen1.2 to Intel Arc setup for QSV support [@MickLesk](https://github.com/MickLesk) ([#11707](https://github.com/community-scripts/ProxmoxVE/pull/11707))
-
-### 🧰 Tools
-
-  - #### 🐞 Bug Fixes
-
-    - addons: ensure curl is installed before use [@MickLesk](https://github.com/MickLesk) ([#11718](https://github.com/community-scripts/ProxmoxVE/pull/11718))
-    - Netbird (addon): add systemd ordering to start after Docker [@MickLesk](https://github.com/MickLesk) ([#11716](https://github.com/community-scripts/ProxmoxVE/pull/11716))
-
-### ❔ Uncategorized
-
-  - Bichon: Update website [@tremor021](https://github.com/tremor021) ([#11711](https://github.com/community-scripts/ProxmoxVE/pull/11711))
-
 ## 2026-02-08
 
 ### 🚀 Updated Scripts

ct/alpine-docker.sh

@@ -20,9 +20,28 @@ color
 catch_errors
 
 function update_script() {
-  header_info
+  if ! apk -e info newt >/dev/null 2>&1; then
-  $STD apk -U upgrade
+    apk add -q newt
-  msg_ok "Updated successfully!"
+  fi
+  while true; do
+    CHOICE=$(
+      whiptail --backtitle "Proxmox VE Helper Scripts" --title "SUPPORT" --menu "Select option" 11 58 1 \
+        "1" "Check for Docker Updates" 3>&2 2>&1 1>&3
+    )
+    exit_status=$?
+    if [ $exit_status == 1 ]; then
+      clear
+      exit-script
+    fi
+    header_info
+    case $CHOICE in
+    1)
+      $STD apk -U upgrade
+      msg_ok "Updated successfully!"
+      exit
+      ;;
+    esac
+  done
   exit 0
 }
 

ct/alpine-grafana.sh

@@ -20,32 +20,43 @@ color
 catch_errors
 
 function update_script() {
+  if ! apk -e info newt >/dev/null 2>&1; then
+    apk add -q newt
+  fi
   LXCIP=$(ip a s dev eth0 | awk '/inet / {print $2}' | cut -d/ -f1)
-
+  while true; do
-  CHOICE=$(msg_menu "Grafana Update Options" \
+    CHOICE=$(
-    "1" "Check for Grafana Updates" \
+      whiptail --backtitle "Proxmox VE Helper Scripts" --title "SUPPORT" --menu "Select option" 11 58 3 \
-    "2" "Allow 0.0.0.0 for listening" \
+        "1" "Check for Grafana Updates" \
-    "3" "Allow only ${LXCIP} for listening")
+        "2" "Allow 0.0.0.0 for listening" \
-
+        "3" "Allow only ${LXCIP} for listening" 3>&2 2>&1 1>&3
-  case $CHOICE in
+    )
-  1)
+    exit_status=$?
-    $STD apk -U upgrade
+    if [ $exit_status == 1 ]; then
-    msg_ok "Updated successfully!"
+      clear
-    exit
+      exit-script
-    ;;
+    fi
-  2)
+    header_info
-    sed -i -e "s/cfg:server.http_addr=.*/cfg:server.http_addr=0.0.0.0/g" /etc/conf.d/grafana
+    case $CHOICE in
-    service grafana restart
+    1)
-    msg_ok "Allowed listening on all interfaces!"
+      $STD apk -U upgrade
-    exit
+      msg_ok "Updated successfully!"
-    ;;
+      exit
-  3)
+      ;;
-    sed -i -e "s/cfg:server.http_addr=.*/cfg:server.http_addr=$LXCIP/g" /etc/conf.d/grafana
+    2)
-    service grafana restart
+      sed -i -e "s/cfg:server.http_addr=.*/cfg:server.http_addr=0.0.0.0/g" /etc/conf.d/grafana
-    msg_ok "Allowed listening only on ${LXCIP}!"
+      service grafana restart
-    exit
+      msg_ok "Allowed listening on all interfaces!"
-    ;;
+      exit
-  esac
+      ;;
+    3)
+      sed -i -e "s/cfg:server.http_addr=.*/cfg:server.http_addr=$LXCIP/g" /etc/conf.d/grafana
+      service grafana restart
+      msg_ok "Allowed listening only on ${LXCIP}!"
+      exit
+      ;;
+    esac
+  done
   exit 0
 }
 

ct/alpine-loki.sh

@@ -20,32 +20,43 @@ color
 catch_errors
 
 function update_script() {
+  if ! apk -e info newt >/dev/null 2>&1; then
+    apk add -q newt
+  fi
   LXCIP=$(ip a s dev eth0 | awk '/inet / {print $2}' | cut -d/ -f1)
-
+  while true; do
-  CHOICE=$(msg_menu "Loki Update Options" \
+    CHOICE=$(
-    "1" "Check for Loki Updates" \
+      whiptail --backtitle "Proxmox VE Helper Scripts" --title "SUPPORT" --menu "Select option" 11 58 3 \
-    "2" "Allow 0.0.0.0 for listening" \
+        "1" "Check for Loki Updates" \
-    "3" "Allow only ${LXCIP} for listening")
+        "2" "Allow 0.0.0.0 for listening" \
-
+        "3" "Allow only ${LXCIP} for listening" 3>&2 2>&1 1>&3
-  case $CHOICE in
+    )
-  1)
+    exit_status=$?
-    $STD apk -U upgrade
+    if [ $exit_status == 1 ]; then
-    msg_ok "Updated successfully!"
+      clear
-    exit
+      exit-script
-    ;;
+    fi
-  2)
+    header_info
-    sed -i -e "s/cfg:server.http_addr=.*/cfg:server.http_addr=0.0.0.0/g" /etc/conf.d/loki
+    case $CHOICE in
-    service loki restart
+    1)
-    msg_ok "Allowed listening on all interfaces!"
+      $STD apk -U upgrade
-    exit
+      msg_ok "Updated successfully!"
-    ;;
+      exit
-  3)
+      ;;
-    sed -i -e "s/cfg:server.http_addr=.*/cfg:server.http_addr=$LXCIP/g" /etc/conf.d/loki
+    2)
-    service loki restart
+      sed -i -e "s/cfg:server.http_addr=.*/cfg:server.http_addr=0.0.0.0/g" /etc/conf.d/loki
-    msg_ok "Allowed listening only on ${LXCIP}!"
+      service loki restart
-    exit
+      msg_ok "Allowed listening on all interfaces!"
-    ;;
+      exit
-  esac
+      ;;
+    3)
+      sed -i -e "s/cfg:server.http_addr=.*/cfg:server.http_addr=$LXCIP/g" /etc/conf.d/loki
+      service loki restart
+      msg_ok "Allowed listening only on ${LXCIP}!"
+      exit
+      ;;
+    esac
+  done
   exit 0
 }
 

ct/alpine-nextcloud.sh

@@ -24,31 +24,33 @@ function update_script() {
     msg_error "No ${APP} Installation Found!"
     exit
   fi
-
+  if ! apk -e info newt >/dev/null 2>&1; then
-  CHOICE=$(msg_menu "Nextcloud Options" \
+    apk add -q newt
-    "1" "Update Alpine Packages" \
+  fi
-    "2" "Nextcloud Login Credentials" \
+  while true; do
-    "3" "Renew Self-signed Certificate")
+    CHOICE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "SUPPORT" --radiolist --cancel-button Exit-Script "Spacebar = Select" 11 58 3 \
-
+      "1" "Nextcloud Login Credentials" ON \
-  case $CHOICE in
+      "2" "Renew Self-signed Certificate" OFF \
-  1)
+      3>&1 1>&2 2>&3)
-    msg_info "Updating Alpine Packages"
+    exit_status=$?
-    $STD apk -U upgrade
+    if [ $exit_status == 1 ]; then
-    msg_ok "Updated Alpine Packages"
+      clear
-    msg_ok "Updated successfully!"
+      exit-script
-    exit
+    fi
-    ;;
+    header_info
-  2)
+    case $CHOICE in
-    cat nextcloud.creds
+    1)
-    exit
+      cat nextcloud.creds
-    ;;
+      exit
-  3)
+      ;;
-    openssl req -x509 -nodes -days 365 -newkey rsa:4096 -keyout /etc/ssl/private/nextcloud-selfsigned.key -out /etc/ssl/certs/nextcloud-selfsigned.crt -subj "/C=US/O=Nextcloud/OU=Domain Control Validated/CN=nextcloud.local" >/dev/null 2>&1
+    2)
-    rc-service nginx restart
+      openssl req -x509 -nodes -days 365 -newkey rsa:4096 -keyout /etc/ssl/private/nextcloud-selfsigned.key -out /etc/ssl/certs/nextcloud-selfsigned.crt -subj "/C=US/O=Nextcloud/OU=Domain Control Validated/CN=nextcloud.local" >/dev/null 2>&1
-    msg_ok "Renewed self-signed certificate"
+      rc-service nginx restart
-    exit
+      exit
-    ;;
+      ;;
-  esac
+    esac
+  done
+  exit 0
 }
 
 start

ct/alpine-redis.sh

@@ -20,36 +20,47 @@ color
 catch_errors
 
 function update_script() {
+  if ! apk -e info newt >/dev/null 2>&1; then
+    apk add -q newt
+  fi
   LXCIP=$(ip a s dev eth0 | awk '/inet / {print $2}' | cut -d/ -f1)
-
+  while true; do
-  CHOICE=$(msg_menu "Redis Management" \
+    CHOICE=$(
-    "1" "Update Redis" \
+      whiptail --backtitle "Proxmox VE Helper Scripts" --title "Redis Management" --menu "Select option" 11 58 3 \
-    "2" "Allow 0.0.0.0 for listening" \
+        "1" "Update Redis" \
-    "3" "Allow only ${LXCIP} for listening")
+        "2" "Allow 0.0.0.0 for listening" \
-
+        "3" "Allow only ${LXCIP} for listening" 3>&2 2>&1 1>&3
-  case $CHOICE in
+    )
-  1)
+    exit_status=$?
-    msg_info "Updating Redis"
+    if [ $exit_status == 1 ]; then
-    apk update && apk upgrade redis
+      clear
-    rc-service redis restart
+      exit-script
-    msg_ok "Updated successfully!"
+    fi
-    exit
+    header_info
-    ;;
+    case $CHOICE in
-  2)
+    1)
-    msg_info "Setting Redis to listen on all interfaces"
+      msg_info "Updating Redis"
-    sed -i 's/^bind .*/bind 0.0.0.0/' /etc/redis.conf
+      apk update && apk upgrade redis
-    rc-service redis restart
+      rc-service redis restart
-    msg_ok "Redis now listens on all interfaces!"
+      msg_ok "Updated successfully!"
-    exit
+      exit
-    ;;
+      ;;
-  3)
+    2)
-    msg_info "Setting Redis to listen only on ${LXCIP}"
+      msg_info "Setting Redis to listen on all interfaces"
-    sed -i "s/^bind .*/bind ${LXCIP}/" /etc/redis.conf
+      sed -i 's/^bind .*/bind 0.0.0.0/' /etc/redis.conf
-    rc-service redis restart
+      rc-service redis restart
-    msg_ok "Redis now listens only on ${LXCIP}!"
+      msg_ok "Redis now listens on all interfaces!"
-    exit
+      exit
-    ;;
+      ;;
-  esac
+    3)
+      msg_info "Setting Redis to listen only on ${LXCIP}"
+      sed -i "s/^bind .*/bind ${LXCIP}/" /etc/redis.conf
+      rc-service redis restart
+      msg_ok "Redis now listens only on ${LXCIP}!"
+      exit
+      ;;
+    esac
+  done
 }
 
 start

ct/alpine-valkey.sh

@@ -20,37 +20,48 @@ color
 catch_errors
 
 function update_script() {
+  if ! apk -e info newt >/dev/null 2>&1; then
+    apk add -q newt
+  fi
   LXCIP=$(ip a s dev eth0 | awk '/inet / {print $2}' | cut -d/ -f1)
-
+  while true; do
-  CHOICE=$(msg_menu "Valkey Management" \
+    CHOICE=$(
-    "1" "Update Valkey" \
+      whiptail --backtitle "Proxmox VE Helper Scripts" --title "Valkey Management" --menu "Select option" 11 58 3 \
-    "2" "Allow 0.0.0.0 for listening" \
+        "1" "Update Valkey" \
-    "3" "Allow only ${LXCIP} for listening")
+        "2" "Allow 0.0.0.0 for listening" \
-
+        "3" "Allow only ${LXCIP} for listening" 3>&2 2>&1 1>&3
-  case $CHOICE in
+    )
-  1)
+    exit_status=$?
-    msg_info "Updating Valkey"
+    if [ $exit_status == 1 ]; then
-    apk update && apk upgrade valkey
+      clear
-    rc-service valkey restart
+      exit-script
-    msg_ok "Updated Valkey"
+    fi
-    msg_ok "Updated successfully!"
+    header_info
-    exit
+    case $CHOICE in
-    ;;
+    1)
-  2)
+      msg_info "Updating Valkey"
-    msg_info "Setting Valkey to listen on all interfaces"
+      apk update && apk upgrade valkey
-    sed -i 's/^bind .*/bind 0.0.0.0/' /etc/valkey/valkey.conf
+      rc-service valkey restart
-    rc-service valkey restart
+      msg_ok "Updated Valkey"
-    msg_ok "Valkey now listens on all interfaces!"
+      msg_ok "Updated successfully!"
-    exit
+      exit
-    ;;
+      ;;
-  3)
+    2)
-    msg_info "Setting Valkey to listen only on ${LXCIP}"
+      msg_info "Setting Valkey to listen on all interfaces"
-    sed -i "s/^bind .*/bind ${LXCIP}/" /etc/valkey/valkey.conf
+      sed -i 's/^bind .*/bind 0.0.0.0/' /etc/valkey/valkey.conf
-    rc-service valkey restart
+      rc-service valkey restart
-    msg_ok "Valkey now listens only on ${LXCIP}!"
+      msg_ok "Valkey now listens on all interfaces!"
-    exit
+      exit
-    ;;
+      ;;
-  esac
+    3)
+      msg_info "Setting Valkey to listen only on ${LXCIP}"
+      sed -i "s/^bind .*/bind ${LXCIP}/" /etc/valkey/valkey.conf
+      rc-service valkey restart
+      msg_ok "Valkey now listens only on ${LXCIP}!"
+      exit
+      ;;
+    esac
+  done
 }
 
 start

ct/alpine-vaultwarden.sh

@@ -20,38 +20,45 @@ color
 catch_errors
 
 function update_script() {
-  CHOICE=$(msg_menu "Vaultwarden Update Options" \
+  if ! apk -e info newt >/dev/null 2>&1; then
-    "1" "Update Vaultwarden" \
+    apk add -q newt
-    "2" "Reset ADMIN_TOKEN")
+  fi
-
+  while true; do
-  case $CHOICE in
+    CHOICE=$(
-  1)
+      whiptail --backtitle "Proxmox VE Helper Scripts" --title "SUPPORT" --menu "Select option" 11 58 2 \
-    $STD apk -U upgrade
+        "1" "Update Vaultwarden" \
-    rc-service vaultwarden restart -q
+        "2" "Reset ADMIN_TOKEN" 3>&2 2>&1 1>&3
-    msg_ok "Updated successfully!"
+    )
-    exit
+    exit_status=$?
-    ;;
+    if [ $exit_status == 1 ]; then
-  2)
+      clear
-    if [[ "${PHS_SILENT:-0}" == "1" ]]; then
+      exit-script
-      msg_warn "Reset ADMIN_TOKEN requires interactive mode, skipping."
-      exit
     fi
-    read -r -s -p "Setup your ADMIN_TOKEN (make it strong): " NEWTOKEN
+    header_info
-    echo ""
+    case $CHOICE in
-    if [[ -n "$NEWTOKEN" ]]; then
+    1)
-      if ! command -v argon2 >/dev/null 2>&1; then apk add argon2 &>/dev/null; fi
+      $STD apk -U upgrade
-      TOKEN=$(echo -n "${NEWTOKEN}" | argon2 "$(openssl rand -base64 32)" -e -id -k 19456 -t 2 -p 1)
-      if [[ ! -f /var/lib/vaultwarden/config.json ]]; then
-        sed -i "s|export ADMIN_TOKEN=.*|export ADMIN_TOKEN='${TOKEN}'|" /etc/conf.d/vaultwarden
-      else
-        sed -i "s|\"admin_token\": .*|\"admin_token\": \"${TOKEN}\",|" /var/lib/vaultwarden/config.json
-      fi
       rc-service vaultwarden restart -q
-      msg_ok "Admin token updated"
+      msg_ok "Updated successfully!"
-    fi
+      exit
-    exit
+      ;;
-    ;;
+    2)
-  esac
+      if NEWTOKEN=$(whiptail --backtitle "Proxmox VE Helper Scripts" --passwordbox "Setup your ADMIN_TOKEN (make it strong)" 10 58 3>&1 1>&2 2>&3); then
+        if [[ -z "$NEWTOKEN" ]]; then exit-script; fi
+        if ! command -v argon2 >/dev/null 2>&1; then apk add argon2 &>/dev/null; fi
+        TOKEN=$(echo -n "${NEWTOKEN}" | argon2 "$(openssl rand -base64 32)" -e -id -k 19456 -t 2 -p 1)
+        if [[ ! -f /var/lib/vaultwarden/config.json ]]; then
+          sed -i "s|export ADMIN_TOKEN=.*|export ADMIN_TOKEN='${TOKEN}'|" /etc/conf.d/vaultwarden
+        else
+          sed -i "s|\"admin_token\": .*|\"admin_token\": \"${TOKEN}\",|" /var/lib/vaultwarden/config.json
+        fi
+        rc-service vaultwarden restart -q
+      fi
+      clear
+      exit
+      ;;
+    esac
+  done
 }
 
 start

ct/alpine-zigbee2mqtt.sh

@@ -20,10 +20,28 @@ color
 catch_errors
 
 function update_script() {
-  header_info
+  if ! apk -e info newt >/dev/null 2>&1; then
-  $STD apk -U upgrade
+    apk add -q newt
-  msg_ok "Updated successfully!"
+  fi
-  exit 0
+  while true; do
+    CHOICE=$(
+      whiptail --backtitle "Proxmox VE Helper Scripts" --title "SUPPORT" --menu "Select option" 11 58 1 \
+        "1" "Check for Zigbee2MQTT Updates" 3>&2 2>&1 1>&3
+    )
+    exit_status=$?
+    if [ $exit_status == 1 ]; then
+      clear
+      exit-script
+    fi
+    header_info
+    case $CHOICE in
+    1)
+      $STD apk -U upgrade
+      msg_ok "Updated successfully!"
+      exit
+      ;;
+    esac
+  done
 }
 
 start

ct/alpine.sh

@@ -20,10 +20,18 @@ color
 catch_errors
 
 function update_script() {
+  UPD=$(
+    whiptail --backtitle "Proxmox VE Helper Scripts" --title "SUPPORT" --radiolist --cancel-button Exit-Script "Spacebar = Select" 11 58 1 \
+      "1" "Check for Alpine Updates" ON \
+      3>&1 1>&2 2>&3
+  )
+
   header_info
-  $STD apk -U upgrade
+  if [ "$UPD" == "1" ]; then
-  msg_ok "Updated successfully!"
+    $STD apk -U upgrade
-  exit 0
+    msg_ok "Updated successfully!"
+    exit 0
+  fi
 }
 
 start

ct/cronicle.sh

@@ -23,9 +23,10 @@ function update_script() {
   header_info
   check_container_storage
   check_container_resources
-  UPD=$(msg_menu "Cronicle Update Options" \
+  UPD=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "SUPPORT" --radiolist --cancel-button Exit-Script "Spacebar = Select" 11 58 2 \
-    "1" "Update ${APP}" \
+    "1" "Update ${APP}" ON \
-    "2" "Install ${APP} Worker")
+    "2" "Install ${APP} Worker" OFF \
+    3>&1 1>&2 2>&3)
 
   if [ "$UPD" == "1" ]; then
     if [[ ! -d /opt/cronicle ]]; then

ct/fileflows.sh

@@ -37,12 +37,17 @@ function update_script() {
     msg_info "Stopped Service"
 
     msg_info "Creating Backup"
-    ls /opt/*.tar.gz &>/dev/null && rm -f /opt/*.tar.gz
     backup_filename="/opt/${APP}_backup_$(date +%F).tar.gz"
     tar -czf "$backup_filename" -C /opt/fileflows Data
     msg_ok "Backup Created"
 
-    fetch_and_deploy_from_url "https://fileflows.com/downloads/zip" "/opt/fileflows"
+    msg_info "Updating $APP to latest version"
+    temp_file=$(mktemp)
+    curl -fsSL https://fileflows.com/downloads/zip -o "$temp_file"
+    $STD unzip -o -d /opt/fileflows "$temp_file"
+    rm -rf "$temp_file"
+    rm -rf "$backup_filename"
+    msg_ok "Updated $APP to latest version"
 
     msg_info "Starting Service"
     systemctl start fileflows

ct/gitea-mirror.sh

@@ -31,27 +31,18 @@ function update_script() {
 
   APP_VERSION=$(grep -o '"version": *"[^"]*"' /opt/gitea-mirror/package.json | cut -d'"' -f4)
   if [[ $APP_VERSION =~ ^2\. ]]; then
-    if [[ "${PHS_SILENT:-0}" == "1" ]]; then
+    if ! whiptail --backtitle "Gitea Mirror Update" --title "⚠️  VERSION 2.x DETECTED" --yesno \
-      msg_warn "Version $APP_VERSION detected. Major version upgrade requires interactive confirmation, skipping."
+      "WARNING: Version $APP_VERSION detected!\n\nUpdating from version 2.x will CLEAR ALL CONFIGURATION.\n\nThis includes:\n• API tokens\n• User settings\n• Repository configurations\n• All custom settings\n\nDo you want to continue with the update process?" 15 70 --defaultno; then
-      exit 75
-    fi
-    msg_warn "WARNING: Version $APP_VERSION detected!"
-    msg_warn "Updating from version 2.x will CLEAR ALL CONFIGURATION."
-    msg_warn "This includes: API tokens, User settings, Repository configurations, All custom settings"
-    echo ""
-    read -r -p "Do you want to continue? (y/N): " CONFIRM
-    if [[ ! "$CONFIRM" =~ ^[Yy]$ ]]; then
       exit 0
     fi
-    msg_warn "FINAL WARNING: This update WILL clear all configuration!"
+
-    msg_warn "Please ensure you have backed up API tokens, custom configurations, and repository settings."
+    if ! whiptail --backtitle "Gitea Mirror Update" --title "⚠️  FINAL CONFIRMATION" --yesno \
-    echo ""
+      "FINAL WARNING: This update WILL clear all configuration!\n\nBEFORE PROCEEDING, please:\n\n• Copy API tokens to a safe location\n• Backup any custom configurations\n• Note down repository settings\n\nThis action CANNOT be undone!" 18 70 --defaultno; then
-    read -r -p "Final confirmation - proceed? (y/N): " CONFIRM2
+      whiptail --backtitle "Gitea Mirror Update" --title "Update Cancelled" --msgbox "Update process cancelled. Please backup your configuration before proceeding." 8 60
-    if [[ ! "$CONFIRM2" =~ ^[Yy]$ ]]; then
-      msg_info "Update cancelled. Please backup your configuration before proceeding."
       exit 0
     fi
-    msg_info "Proceeding with version $APP_VERSION update. All configuration will be cleared as warned."
+    whiptail --backtitle "Gitea Mirror Update" --title "Proceeding with Update" --msgbox \
+      "Proceeding with version $APP_VERSION update.\n\nAll configuration will be cleared as warned." 8 50
     rm -rf /opt/gitea-mirror
   fi
 

ct/homeassistant.sh

@@ -27,11 +27,12 @@ function update_script() {
     msg_error "No ${APP} Installation Found!"
     exit
   fi
-  UPD=$(msg_menu "Home Assistant Update Options" \
+  UPD=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "UPDATE" --radiolist --cancel-button Exit-Script "Spacebar = Select" 11 58 4 \
-    "1" "Update ALL Containers" \
+    "1" "Update ALL Containers" ON \
-    "2" "Remove ALL Unused Images" \
+    "2" "Remove ALL Unused Images" OFF \
-    "3" "Install HACS" \
+    "3" "Install HACS" OFF \
-    "4" "Install FileBrowser")
+    "4" "Install FileBrowser" OFF \
+    3>&1 1>&2 2>&3)
 
   if [ "$UPD" == "1" ]; then
     msg_info "Updating All Containers"

ct/koillection.sh

@@ -33,8 +33,7 @@ function update_script() {
     msg_ok "Stopped Service"
 
     PHP_VERSION="8.5" PHP_APACHE="YES" setup_php
-    setup_composer
+    
-
     msg_info "Creating a backup"
     mv /opt/koillection/ /opt/koillection-backup
     msg_ok "Backup created"

ct/loki.sh

@@ -29,13 +29,21 @@ function update_script() {
     exit 1
   fi
 
-  CHOICE=$(msg_menu "Loki Update Options" \
+  while true; do
-    "1" "Update Loki & Promtail" \
+    CHOICE=$(
-    "2" "Allow 0.0.0.0 for listening" \
+      whiptail --backtitle "Proxmox VE Helper Scripts" --title "SUPPORT" --menu "Select option" 11 58 3 \
-    "3" "Allow only ${LOCAL_IP} for listening")
+        "1" "Update Loki & Promtail" \
-
+        "2" "Allow 0.0.0.0 for listening" \
-  case $CHOICE in
+        "3" "Allow only ${LOCAL_IP} for listening" 3>&2 2>&1 1>&3
-  1)
+    )
+    exit_status=$?
+    if [ $exit_status == 1 ]; then
+      clear
+      exit-script
+    fi
+    header_info
+    case $CHOICE in
+    1)
       msg_info "Stopping Loki"
       systemctl stop loki
       if systemctl is-active --quiet promtail 2>/dev/null || dpkg -s promtail >/dev/null 2>&1; then
@@ -77,6 +85,7 @@ function update_script() {
       exit
       ;;
     esac
+  done
   exit 0
 }
 

ct/meilisearch.sh

@@ -24,9 +24,21 @@ function update_script() {
   check_container_storage
   check_container_resources
 
-  setup_meilisearch
+  UPD=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "Meilisearch Update" --radiolist --cancel-button Exit-Script "Spacebar = Select" 10 58 2 \
+    "1" "Update Meilisearch" ON \
+    "2" "Update Meilisearch-UI" OFF \
+    3>&1 1>&2 2>&3)
 
-  if [[ -d /opt/meilisearch-ui ]]; then
+  if [ "$UPD" == "1" ]; then
+    setup_meilisearch
+    exit
+  fi
+
+  if [ "$UPD" == "2" ]; then
+    if [[ ! -d /opt/meilisearch-ui ]]; then
+      msg_error "No Meilisearch-UI Installation Found!"
+      exit
+    fi
     if check_for_gh_release "meilisearch-ui" "riccox/meilisearch-ui"; then
       msg_info "Stopping Meilisearch-UI"
       systemctl stop meilisearch-ui
@@ -46,11 +58,10 @@ function update_script() {
       msg_info "Starting Meilisearch-UI"
       systemctl start meilisearch-ui
       msg_ok "Started Meilisearch-UI"
+      msg_ok "Updated successfully!"
     fi
+    exit
   fi
-
-  msg_ok "Updated successfully!"
-  exit
 }
 
 start

ct/nginxproxymanager.sh

@@ -28,6 +28,12 @@ function update_script() {
     exit
   fi
 
+  msg_error "This script is currently disabled due to an external issue with the OpenResty APT repository."
+  msg_error "The repository's GPG key uses SHA-1 signatures, which are no longer accepted by Debian as of February 1, 2026."
+  msg_error "The issue is tracked in openresty/openresty#1097"
+  msg_error "For more details, see: https://github.com/community-scripts/ProxmoxVE/issues/11406"
+  exit 1
+
   if [[ $(grep -E '^VERSION_ID=' /etc/os-release) == *"12"* ]]; then
     msg_error "Wrong Debian version detected!"
     msg_error "Please create a snapshot first. You must upgrade your LXC to Debian Trixie before updating. Visit: https://github.com/community-scripts/ProxmoxVE/discussions/7489"
@@ -139,17 +145,15 @@ function update_script() {
   "database": {
     "engine": "knex-native",
     "knex": {
-      "client": "better-sqlite3",
+      "client": "sqlite3",
       "connection": {
         "filename": "/data/database.sqlite"
-      },
+      }
-      "useNullAsDefault": true
     }
   }
 }
 EOF
   fi
-  sed -i 's/"client": "sqlite3"/"client": "better-sqlite3"/' /app/config/production.json
   cd /app 
   $STD yarn install --network-timeout 600000
   msg_ok "Initialized Backend"

ct/node-red.sh

@@ -27,9 +27,10 @@ function update_script() {
     msg_error "No ${APP} Installation Found!"
     exit
   fi
-  UPD=$(msg_menu "Node-Red Update Options" \
+  UPD=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "SUPPORT" --radiolist --cancel-button Exit-Script "Spacebar = Select" 11 58 2 \
-    "1" "Update ${APP}" \
+    "1" "Update ${APP}" ON \
-    "2" "Install Themes")
+    "2" "Install Themes" OFF \
+    3>&1 1>&2 2>&3)
   if [ "$UPD" == "1" ]; then
     NODE_VERSION="22" setup_nodejs
 
@@ -48,31 +49,32 @@ function update_script() {
     exit
   fi
   if [ "$UPD" == "2" ]; then
-    THEME=$(msg_menu "Node-Red Themes" \
+    THEME=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "NODE-RED THEMES" --radiolist --cancel-button Exit-Script "Choose Theme" 15 58 6 \
-      "midnight-red" "Midnight Red (default)" \
+      "aurora" "" OFF \
-      "aurora" "Aurora" \
+      "cobalt2" "" OFF \
-      "cobalt2" "Cobalt2" \
+      "dark" "" OFF \
-      "dark" "Dark" \
+      "dracula" "" OFF \
-      "dracula" "Dracula" \
+      "espresso-libre" "" OFF \
-      "espresso-libre" "Espresso Libre" \
+      "github-dark" "" OFF \
-      "github-dark" "GitHub Dark" \
+      "github-dark-default" "" OFF \
-      "github-dark-default" "GitHub Dark Default" \
+      "github-dark-dimmed" "" OFF \
-      "github-dark-dimmed" "GitHub Dark Dimmed" \
+      "midnight-red" "" ON \
-      "monoindustrial" "Monoindustrial" \
+      "monoindustrial" "" OFF \
-      "monokai" "Monokai" \
+      "monokai" "" OFF \
-      "monokai-dimmed" "Monokai Dimmed" \
+      "monokai-dimmed" "" OFF \
-      "noctis" "Noctis" \
+      "noctis" "" OFF \
-      "oceanic-next" "Oceanic Next" \
+      "oceanic-next" "" OFF \
-      "oled" "OLED" \
+      "oled" "" OFF \
-      "one-dark-pro" "One Dark Pro" \
+      "one-dark-pro" "" OFF \
-      "one-dark-pro-darker" "One Dark Pro Darker" \
+      "one-dark-pro-darker" "" OFF \
-      "solarized-dark" "Solarized Dark" \
+      "solarized-dark" "" OFF \
-      "solarized-light" "Solarized Light" \
+      "solarized-light" "" OFF \
-      "tokyo-night" "Tokyo Night" \
+      "tokyo-night" "" OFF \
-      "tokyo-night-light" "Tokyo Night Light" \
+      "tokyo-night-light" "" OFF \
-      "tokyo-night-storm" "Tokyo Night Storm" \
+      "tokyo-night-storm" "" OFF \
-      "totallyinformation" "TotallyInformation" \
+      "totallyinformation" "" OFF \
-      "zenburn" "Zenburn")
+      "zenburn" "" OFF \
+      3>&1 1>&2 2>&3)
     header_info
     msg_info "Installing ${THEME} Theme"
     cd /root/.node-red

ct/npmplus.sh

@@ -20,21 +20,32 @@ color
 catch_errors
 
 function update_script() {
+  UPD=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "UPDATE MODE" --radiolist --cancel-button Exit-Script "Spacebar = Select" 14 60 2 \
+    "1" "Check for Alpine Updates" OFF \
+    "2" "Update NPMplus Docker Container" ON \
+    3>&1 1>&2 2>&3)
+
   header_info "$APP"
 
-  msg_info "Updating Alpine OS"
+  case "$UPD" in
-  $STD apk -U upgrade
+  "1")
-  msg_ok "System updated"
+    msg_info "Updating Alpine OS"
-
+    $STD apk -U upgrade
-  msg_info "Pulling latest NPMplus container image"
+    msg_ok "System updated"
-  cd /opt
+    exit
-  $STD docker compose pull
+    ;;
-  msg_info "Recreating container"
+  "2")
-  $STD docker compose up -d
+    msg_info "Updating NPMplus Container"
-  msg_ok "Updated NPMplus container"
+    cd /opt
-
+    msg_info "Pulling latest container image"
-  msg_ok "Updated successfully!"
+    $STD docker compose pull
-  exit
+    msg_info "Recreating container"
+    $STD docker compose up -d
+    msg_ok "Updated successfully!"
+    exit
+    ;;
+  esac
+  exit 0
 }
 
 start

ct/plex.sh

@@ -29,9 +29,10 @@ function update_script() {
     msg_error "No ${APP} Installation Found!"
     exit
   fi
-  UPD=$(msg_menu "Plex Update Options" \
+  UPD=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "SUPPORT" --radiolist --cancel-button Exit-Script "Spacebar = Select \nplexupdate info >> https://github.com/mrworf/plexupdate" 10 59 2 \
-    "1" "Update LXC" \
+    "1" "Update LXC" ON \
-    "2" "Install plexupdate")
+    "2" "Install plexupdate" OFF \
+    3>&1 1>&2 2>&3)
   if [ "$UPD" == "1" ]; then
     msg_info "Updating ${APP} LXC"
     $STD apt update

ct/podman-homeassistant.sh

@@ -27,11 +27,12 @@ function update_script() {
     msg_error "No ${APP} Installation Found!"
     exit
   fi
-  UPD=$(msg_menu "Home Assistant Update Options" \
+  UPD=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "UPDATE" --radiolist --cancel-button Exit-Script "Spacebar = Select" 11 58 4 \
-    "1" "Update system and containers" \
+    "1" "Update system and containers" ON \
-    "2" "Install HACS" \
+    "2" "Install HACS" OFF \
-    "3" "Install FileBrowser" \
+    "3" "Install FileBrowser" OFF \
-    "4" "Remove ALL Unused Images")
+    "4" "Remove ALL Unused Images" OFF \
+    3>&1 1>&2 2>&3)
 
   if [ "$UPD" == "1" ]; then
     msg_info "Updating ${APP} LXC"

ct/umlautadaptarr.sh

@@ -33,9 +33,7 @@ function update_script() {
     systemctl stop umlautadaptarr
     msg_ok "Stopped Service"
 
-    cp /opt/UmlautAdaptarr/appsettings.json /opt/UmlautAdaptarr/appsettings.json.bak
     fetch_and_deploy_gh_release "UmlautAdaptarr" "PCJones/Umlautadaptarr" "prebuild" "latest" "/opt/UmlautAdaptarr" "linux-x64.zip"
-    cp /opt/UmlautAdaptarr/appsettings.json.bak /opt/UmlautAdaptarr/appsettings.json
 
     msg_info "Starting Service"
     systemctl start umlautadaptarr

ct/vaultwarden.sh

@@ -31,9 +31,11 @@ function update_script() {
   VAULT=$(get_latest_github_release "dani-garcia/vaultwarden")
   WVRELEASE=$(get_latest_github_release "dani-garcia/bw_web_builds")
 
-  UPD=$(msg_menu "Vaultwarden Update Options" \
+  UPD=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "SUPPORT" --radiolist --cancel-button Exit-Script "Spacebar = Select" 11 58 3 \
-    "1" "Update VaultWarden + Web-Vault" \
+    "1" "VaultWarden $VAULT" ON \
-    "2" "Set Admin Token")
+    "2" "Web-Vault $WVRELEASE" OFF \
+    "3" "Set Admin Token" OFF \
+    3>&1 1>&2 2>&3)
 
   if [ "$UPD" == "1" ]; then
     if check_for_gh_release "vaultwarden" "dani-garcia/vaultwarden"; then
@@ -57,10 +59,14 @@ function update_script() {
       msg_info "Starting Service"
       systemctl start vaultwarden
       msg_ok "Started Service"
+      msg_ok "Updated successfully!"
     else
       msg_ok "VaultWarden is already up-to-date"
     fi
+    exit
+  fi
 
+  if [ "$UPD" == "2" ]; then
     if check_for_gh_release "vaultwarden_webvault" "dani-garcia/bw_web_builds"; then
       msg_info "Stopping Service"
       systemctl stop vaultwarden
@@ -78,22 +84,16 @@ function update_script() {
       msg_info "Starting Service"
       systemctl start vaultwarden
       msg_ok "Started Service"
+      msg_ok "Updated successfully!"
     else
       msg_ok "Web-Vault is already up-to-date"
     fi
-
-    msg_ok "Updated successfully!"
     exit
   fi
 
-  if [ "$UPD" == "2" ]; then
+  if [ "$UPD" == "3" ]; then
-    if [[ "${PHS_SILENT:-0}" == "1" ]]; then
+    if NEWTOKEN=$(whiptail --backtitle "Proxmox VE Helper Scripts" --passwordbox "Set the ADMIN_TOKEN" 10 58 3>&1 1>&2 2>&3); then
-      msg_warn "Set Admin Token requires interactive mode, skipping."
+      if [[ -z "$NEWTOKEN" ]]; then exit; fi
-      exit
-    fi
-    read -r -s -p "Set the ADMIN_TOKEN: " NEWTOKEN
-    echo ""
-    if [[ -n "$NEWTOKEN" ]]; then
       ensure_dependencies argon2
       TOKEN=$(echo -n "${NEWTOKEN}" | argon2 "$(openssl rand -base64 32)" -t 2 -m 16 -p 4 -l 64 -e)
       sed -i "s|ADMIN_TOKEN=.*|ADMIN_TOKEN='${TOKEN}'|" /opt/vaultwarden/.env

ct/wger.sh

@@ -7,9 +7,9 @@ source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxV
 
 APP="wger"
 var_tags="${var_tags:-management;fitness}"
-var_cpu="${var_cpu:-2}"
+var_cpu="${var_cpu:-1}"
-var_ram="${var_ram:-2048}"
+var_ram="${var_ram:-1024}"
-var_disk="${var_disk:-8}"
+var_disk="${var_disk:-6}"
 var_os="${var_os:-debian}"
 var_version="${var_version:-13}"
 var_unprivileged="${var_unprivileged:-1}"
@@ -23,44 +23,38 @@ function update_script() {
   header_info
   check_container_storage
   check_container_resources
-
+  if [[ ! -d /home/wger ]]; then
-  if [[ ! -d /opt/wger ]]; then
     msg_error "No ${APP} Installation Found!"
     exit
   fi
-
+  RELEASE=$(curl -fsSL https://api.github.com/repos/wger-project/wger/releases/latest | grep "tag_name" | awk '{print substr($2, 2, length($2)-3)}')
-  if check_for_gh_release "wger" "wger-project/wger"; then
+  if [[ "${RELEASE}" != "$(cat /opt/${APP}_version.txt)" ]] || [[ ! -f /opt/${APP}_version.txt ]]; then
     msg_info "Stopping Service"
-    systemctl stop redis-server nginx celery celery-beat wger
+    systemctl stop wger
     msg_ok "Stopped Service"
 
-    msg_info "Backing up Data"
+    msg_info "Updating $APP to v${RELEASE}"
-    cp -r /opt/wger/media /opt/wger_media_backup
+    temp_file=$(mktemp)
-    cp /opt/wger/.env /opt/wger_env_backup
+    curl -fsSL "https://github.com/wger-project/wger/archive/refs/tags/$RELEASE.tar.gz" -o "$temp_file"
-    msg_ok "Backed up Data"
+    tar xzf "$temp_file"
+    cp -rf wger-"$RELEASE"/* /home/wger/src
+    cd /home/wger/src
+    $STD pip install -r requirements_prod.txt --ignore-installed
+    $STD pip install -e .
+    $STD python3 manage.py migrate
+    $STD python3 manage.py collectstatic --no-input
+    $STD yarn install
+    $STD yarn build:css:sass
+    rm -rf "$temp_file"
+    echo "${RELEASE}" >/opt/${APP}_version.txt
+    msg_ok "Updated $APP to v${RELEASE}"
 
-    CLEAN_INSTALL=1 fetch_and_deploy_gh_release "wger" "wger-project/wger" "tarball"
+    msg_info "Starting Service"
-
+    systemctl start wger
-    msg_info "Restoring Data"
+    msg_ok "Started Service"
-    cp -r /opt/wger_media_backup/. /opt/wger/media
+    msg_ok "Updated successfully!"
-    cp /opt/wger_env_backup /opt/wger/.env
+  else
-    rm -rf /opt/wger_media_backup /opt/wger_env_backup
+    msg_ok "No update required. ${APP} is already at v${RELEASE}"
-
-    msg_ok "Restored Data"
-
-    msg_info "Updating wger"
-    cd /opt/wger
-    set -a && source /opt/wger/.env && set +a
-    export DJANGO_SETTINGS_MODULE=settings.main
-    $STD uv pip install .
-    $STD uv run python manage.py migrate
-    $STD uv run python manage.py collectstatic --no-input
-    msg_ok "Updated wger"
-
-    msg_info "Starting Services"
-    systemctl start redis-server nginx celery celery-beat wger
-    msg_ok "Started Services"
-    msg_ok "Updated Successfully"
   fi
   exit
 }
@@ -69,7 +63,7 @@ start
 build_container
 description
 
-msg_ok "Completed Successfully!\n"
+msg_ok "Completed successfully!\n"
 echo -e "${CREATING}${GN}${APP} setup has been successfully initialized!${CL}"
 echo -e "${INFO}${YW} Access it using the following URL:${CL}"
 echo -e "${TAB}${GATEWAY}${BGN}http://${IP}:3000${CL}"

frontend/public/json/bichon.json

@@ -35,10 +35,6 @@
     {
       "text": "The Disk space initially allocated by the script is only a placeholder, as we can't know how much space you will ever need. You should increase it to match your workload.",
       "type": "info"
-    },
-    {
-      "text": "Please copy your `BICHON_ENCRYPT_PASSWORD` from `/opt/bichon/bichon.env` to a safe place.",
-      "type": "warning"
     }
   ]
 }

frontend/public/json/github-versions.json

@@ -1,5 +1,5 @@
 {
-  "generated": "2026-02-09T12:16:55Z",
+  "generated": "2026-02-09T06:27:10Z",
   "versions": [
     {
       "slug": "2fauth",
@@ -109,9 +109,9 @@
     {
       "slug": "bentopdf",
       "repo": "alam00000/bentopdf",
-      "version": "v2.2.0",
+      "version": "v2.1.0",
       "pinned": false,
-      "date": "2026-02-09T07:07:40Z"
+      "date": "2026-02-02T14:30:55Z"
     },
     {
       "slug": "beszel",
@@ -284,9 +284,9 @@
     {
       "slug": "domain-monitor",
       "repo": "Hosteroid/domain-monitor",
-      "version": "v1.1.2",
+      "version": "v1.1.1",
       "pinned": false,
-      "date": "2026-02-09T06:29:34Z"
+      "date": "2025-11-18T11:32:30Z"
     },
     {
       "slug": "donetick",
@@ -1292,9 +1292,9 @@
     {
       "slug": "snowshare",
       "repo": "TuroYT/snowshare",
-      "version": "v1.3.3",
+      "version": "v1.2.12",
       "pinned": false,
-      "date": "2026-02-09T10:52:12Z"
+      "date": "2026-01-30T13:35:56Z"
     },
     {
       "slug": "sonarr",
@@ -1523,9 +1523,9 @@
     {
       "slug": "vikunja",
       "repo": "go-vikunja/vikunja",
-      "version": "v1.1.0",
+      "version": "v1.0.0",
       "pinned": false,
-      "date": "2026-02-09T10:34:29Z"
+      "date": "2026-01-28T11:12:59Z"
     },
     {
       "slug": "wallabag",

frontend/public/json/nginxproxymanager.json

@@ -30,14 +30,10 @@
     }
   ],
   "default_credentials": {
-    "username": null,
+    "username": "admin@example.com",
-    "password": null
+    "password": "changeme"
   },
   "notes": [
-    {
-      "text": "On first launch, a setup wizard will guide you through creating an admin account. There are no default credentials.",
-      "type": "info"
-    },
     {
       "text": "You can install the specific one certbot you prefer, or you can Running /app/scripts/install-certbot-plugins within the Nginx Proxy Manager (NPM) LXC shell will install many common plugins. Important: This script does not install all Certbot plugins, as some require additional, external system dependencies (like specific packages for certain DNS providers). These external dependencies must be manually installed within the LXC container before you can successfully install and use the corresponding Certbot plugin. Consult the plugin's documentation for required packages.",
       "type": "info"

frontend/public/json/wger.json

@@ -19,9 +19,9 @@
       "type": "default",
       "script": "ct/wger.sh",
       "resources": {
-        "cpu": 2,
+        "cpu": 1,
-        "ram": 2048,
+        "ram": 1024,
-        "hdd": 8,
+        "hdd": 6,
         "os": "debian",
         "version": "13"
       }
@@ -33,7 +33,7 @@
   },
   "notes": [
     {
-      "text": "This LXC also runs Celery and Redis to synchronize workouts and ingredients",
+      "text": "Enable proxy support by uncommenting this line in `/home/wger/src/settings.py` and pointing it to your URL: `# CSRF_TRUSTED_ORIGINS = ['http://127.0.0.1', 'https://my.domain.example.com']`, then restart the service `systemctl restart wger`.",
       "type": "info"
     }
   ]

install/fileflows-install.sh

@@ -15,30 +15,31 @@ network_check
 update_os
 
 msg_info "Installing Dependencies"
-$STD apt install -y \
+$STD apt-get install -y \
   ffmpeg \
+  jq \
   imagemagick
 msg_ok "Installed Dependencies"
 
 setup_hwaccel
 
 msg_info "Installing ASP.NET Core Runtime"
-setup_deb822_repo \
+curl -fsSL https://packages.microsoft.com/config/debian/13/packages-microsoft-prod.deb -o packages-microsoft-prod.deb
-  "microsoft" \
+$STD dpkg -i packages-microsoft-prod.deb
-  "https://packages.microsoft.com/keys/microsoft-2025.asc" \
+rm -rf packages-microsoft-prod.deb
-  "https://packages.microsoft.com/debian/13/prod/" \
+$STD apt-get update
-  "trixie"
+$STD apt-get install -y aspnetcore-runtime-8.0
-$STD apt install -y aspnetcore-runtime-8.0
 msg_ok "Installed ASP.NET Core Runtime"
 
-fetch_and_deploy_from_url "https://fileflows.com/downloads/zip" "/opt/fileflows"
-
 msg_info "Setup FileFlows"
 $STD ln -svf /usr/bin/ffmpeg /usr/local/bin/ffmpeg
 $STD ln -svf /usr/bin/ffprobe /usr/local/bin/ffprobe
-cd /opt/fileflows/Server
+temp_file=$(mktemp)
-dotnet FileFlows.Server.dll --systemd install --root true
+curl -fsSL https://fileflows.com/downloads/zip -o "$temp_file"
+$STD unzip -d /opt/fileflows "$temp_file"
+$STD bash -c "cd /opt/fileflows/Server && dotnet FileFlows.Server.dll --systemd install --root true"
 systemctl enable -q --now fileflows
+rm -f "$temp_file"
 msg_ok "Setup FileFlows"
 
 motd_ssh

install/nginx-ui-install.sh

@@ -37,6 +37,7 @@ PageSize = 10
 Host = 0.0.0.0
 Port = 9000
 RunMode = release
+JwtSecret = $(openssl rand -hex 32)
 
 [cert]
 HTTPChallengePort = 9180

install/nginxproxymanager-install.sh

@@ -130,11 +130,10 @@ if [ ! -f /app/config/production.json ]; then
   "database": {
     "engine": "knex-native",
     "knex": {
-      "client": "better-sqlite3",
+      "client": "sqlite3",
       "connection": {
         "filename": "/data/database.sqlite"
-      },
+      }
-      "useNullAsDefault": true
     }
   }
 }

install/umlautadaptarr-install.sh

@@ -27,6 +27,68 @@ msg_ok "Installed Dependencies"
 
 fetch_and_deploy_gh_release "UmlautAdaptarr" "PCJones/Umlautadaptarr" "prebuild" "latest" "/opt/UmlautAdaptarr" "linux-x64.zip"
 
+msg_info "Setting up UmlautAdaptarr"
+cat <<EOF >/opt/UmlautAdaptarr/appsettings.json
+{
+  "Logging": {
+    "LogLevel": {
+      "Default": "Information",
+      "Microsoft.AspNetCore": "Warning"
+    },
+    "Console": {
+      "TimestampFormat": "yyyy-MM-dd HH:mm:ss::"
+    }
+  },
+  "AllowedHosts": "*",
+  "Kestrel": {
+    "Endpoints": {
+      "Http": {
+        "Url": "http://[::]:5005"
+      }
+    }
+  },
+  "Settings": {
+    "UserAgent": "UmlautAdaptarr/1.0",
+    "UmlautAdaptarrApiHost": "https://umlautadaptarr.pcjones.de/api/v1",
+    "IndexerRequestsCacheDurationInMinutes": 12
+  },
+  "Sonarr": [
+    {
+      "Enabled": false,
+      "Name": "Sonarr",
+      "Host": "http://192.168.1.100:8989",
+      "ApiKey": "dein_sonarr_api_key"
+    }
+  ],
+  "Radarr": [
+    {
+      "Enabled": false,
+      "Name": "Radarr",
+      "Host": "http://192.168.1.101:7878",
+      "ApiKey": "dein_radarr_api_key"
+    }
+  ],
+  "Lidarr": [
+  {
+    "Enabled": false,
+    "Host": "http://192.168.1.102:8686",
+    "ApiKey": "dein_lidarr_api_key"
+  },
+ ],
+  "Readarr": [
+  {
+    "Enabled": false,
+    "Host": "http://192.168.1.103:8787",
+    "ApiKey": "dein_readarr_api_key"
+  },
+ ],
+  "IpLeakTest": {
+    "Enabled": false
+  }
+}
+EOF
+msg_ok "Setup UmlautAdaptarr"
+
 msg_info "Creating Service"
 cat <<EOF >/etc/systemd/system/umlautadaptarr.service
 [Unit]

install/wger-install.sh

@@ -15,167 +15,92 @@ update_os
 
 msg_info "Installing Dependencies"
 $STD apt install -y \
-  build-essential \
+  git \
-  nginx \
+  apache2 \
-  redis-server \
+  libapache2-mod-wsgi-py3
-  libpq-dev
 msg_ok "Installed Dependencies"
 
-NODE_VERSION="22" NODE_MODULE="sass" setup_nodejs
+msg_info "Installing Python"
-setup_uv
+$STD apt install -y python3-pip
-PG_VERSION="16" setup_postgresql
+rm -rf /usr/lib/python3.*/EXTERNALLY-MANAGED
-PG_DB_NAME="wger" PG_DB_USER="wger" setup_postgresql_db
+msg_ok "Installed Python"
-fetch_and_deploy_gh_release "wger" "wger-project/wger" "tarball"
+
+NODE_VERSION="22" NODE_MODULE="yarn,sass" setup_nodejs
 
 msg_info "Setting up wger"
-mkdir -p /opt/wger/{static,media}
+$STD adduser wger --disabled-password --gecos ""
-chmod o+w /opt/wger/media
+mkdir /home/wger/db
-cd /opt/wger
+touch /home/wger/db/database.sqlite
-$STD corepack enable
+chown :www-data -R /home/wger/db
-$STD npm install
+chmod g+w /home/wger/db /home/wger/db/database.sqlite
-$STD npm run build:css:sass
+mkdir /home/wger/{static,media}
-$STD uv venv
+chmod o+w /home/wger/media
-$STD uv pip install . --group docker
+temp_dir=$(mktemp -d)
-SECRET_KEY=$(openssl rand -base64 40)
+cd "$temp_dir"
-cat <<EOF >/opt/wger/.env
+RELEASE=$(curl -fsSL https://api.github.com/repos/wger-project/wger/releases/latest | grep "tag_name" | awk '{print substr($2, 2, length($2)-3)}')
-DJANGO_SETTINGS_MODULE=settings.main
+curl -fsSL "https://github.com/wger-project/wger/archive/refs/tags/$RELEASE.tar.gz" -o "$RELEASE.tar.gz"
-PYTHONPATH=/opt/wger
+tar xzf "$RELEASE".tar.gz
+mv wger-"$RELEASE" /home/wger/src
+cd /home/wger/src
+$STD pip install -r requirements_prod.txt --ignore-installed
+$STD pip install -e .
+$STD wger create-settings --database-path /home/wger/db/database.sqlite
+sed -i "s#home/wger/src/media#home/wger/media#g" /home/wger/src/settings.py
+sed -i "/MEDIA_ROOT = '\/home\/wger\/media'/a STATIC_ROOT = '/home/wger/static'" /home/wger/src/settings.py
+$STD wger bootstrap
+$STD python3 manage.py collectstatic
+rm -rf "$temp_dir"
+echo "${RELEASE}" >/opt/wger_version.txt
+msg_ok "Finished setting up wger"
 
-DJANGO_DB_ENGINE=django.db.backends.postgresql
+msg_info "Creating Service"
-DJANGO_DB_DATABASE=${PG_DB_NAME}
+cat <<EOF >/etc/apache2/sites-available/wger.conf
-DJANGO_DB_USER=${PG_DB_USER}
+<Directory /home/wger/src>
-DJANGO_DB_PASSWORD=${PG_DB_PASS}
+    <Files wsgi.py>
-DJANGO_DB_HOST=localhost
+        Require all granted
-DJANGO_DB_PORT=5432
+    </Files>
-DATABASE_URL=postgresql://${PG_DB_USER}:${PG_DB_PASS}@localhost:5432/${PG_DB_NAME}
+</Directory>
 
-DJANGO_MEDIA_ROOT=/opt/wger/media
+<VirtualHost *:80>
-DJANGO_STATIC_ROOT=/opt/wger/static
+    WSGIApplicationGroup %{GLOBAL}
-DJANGO_STATIC_URL=/static/
+    WSGIDaemonProcess wger python-path=/home/wger/src python-home=/home/wger
+    WSGIProcessGroup wger
+    WSGIScriptAlias / /home/wger/src/wger/wsgi.py
+    WSGIPassAuthorization On
 
-ALLOWED_HOSTS=${LOCAL_IP},localhost,127.0.0.1
+    Alias /static/ /home/wger/static/
-CSRF_TRUSTED_ORIGINS=http://${LOCAL_IP}:3000
+    <Directory /home/wger/static>
+        Require all granted
+    </Directory>
 
-USE_X_FORWARDED_HOST=True
+    Alias /media/ /home/wger/media/
-SECURE_PROXY_SSL_HEADER=HTTP_X_FORWARDED_PROTO,http
+    <Directory /home/wger/media>
+        Require all granted
+    </Directory>
 
-DJANGO_CACHE_BACKEND=django_redis.cache.RedisCache
+    ErrorLog /var/log/apache2/wger-error.log
-DJANGO_CACHE_LOCATION=redis://127.0.0.1:6379/1
+    CustomLog /var/log/apache2/wger-access.log combined
-DJANGO_CACHE_TIMEOUT=300
+</VirtualHost>
-DJANGO_CACHE_CLIENT_CLASS=django_redis.client.DefaultClient
-AXES_CACHE_ALIAS=default
-
-USE_CELERY=True
-CELERY_BROKER=redis://127.0.0.1:6379/2
-CELERY_BACKEND=redis://127.0.0.1:6379/2
-
-SITE_URL=http://${LOCAL_IP}:3000
-SECRET_KEY=${SECRET_KEY}
 EOF
-set -a && source /opt/wger/.env && set +a
+$STD a2dissite 000-default.conf
-$STD uv run wger bootstrap
+$STD a2ensite wger
-$STD uv run python manage.py collectstatic --no-input
+systemctl restart apache2
-cat <<EOF | uv run python manage.py shell
-from django.contrib.auth import get_user_model
-User = get_user_model()
-
-user, created = User.objects.get_or_create(
-    username="admin",
-    defaults={"email": "admin@localhost"},
-)
-
-if created:
-    user.set_password("${PG_DB_PASS}")
-    user.is_superuser = True
-    user.is_staff = True
-    user.save()
-EOF
-msg_ok "Set up wger"
-msg_info "Creating Config and Services"
 cat <<EOF >/etc/systemd/system/wger.service
 [Unit]
-Description=wger Gunicorn
+Description=wger Service
 After=network.target
 
 [Service]
+Type=simple
 User=root
-WorkingDirectory=/opt/wger
+ExecStart=/usr/local/bin/wger start -a 0.0.0.0 -p 3000
-EnvironmentFile=/opt/wger/.env
-ExecStart=/opt/wger/.venv/bin/gunicorn \
-  --bind 127.0.0.1:8000 \
-  --workers 3 \
-  --threads 2 \
-  --timeout 120 \
-  wger.wsgi:application
 Restart=always
 
 [Install]
 WantedBy=multi-user.target
 EOF
-cat <<EOF >/etc/systemd/system/celery.service
+systemctl enable -q --now wger
-[Unit]
+msg_ok "Created Service"
-Description=wger Celery Worker
-After=network.target redis-server.service
-Requires=redis-server.service
-
-[Service]
-WorkingDirectory=/opt/wger
-EnvironmentFile=/opt/wger/.env
-ExecStart=/opt/wger/.venv/bin/celery -A wger worker -l info
-Restart=always
-
-[Install]
-WantedBy=multi-user.target
-EOF
-
-mkdir -p /var/lib/wger/celery
-chmod 700 /var/lib/wger/celery
-cat <<EOF >/etc/systemd/system/celery-beat.service
-[Unit]
-Description=wger Celery Beat
-After=network.target redis-server.service
-Requires=redis-server.service
-
-[Service]
-WorkingDirectory=/opt/wger
-EnvironmentFile=/opt/wger/.env
-ExecStart=/opt/wger/.venv/bin/celery -A wger beat -l info \
-  --schedule /var/lib/wger/celery/celerybeat-schedule
-Restart=always
-
-[Install]
-WantedBy=multi-user.target
-EOF
-cat <<'EOF' >/etc/nginx/sites-available/wger
-server {
-    listen 3000;
-    server_name _;
-
-    client_max_body_size 20M;
-
-    location /static/ {
-        alias /opt/wger/static/;
-        expires 30d;
-    }
-
-    location /media/ {
-        alias /opt/wger/media/;
-    }
-
-    location / {
-        proxy_pass http://127.0.0.1:8000;
-        proxy_set_header Host $host;
-        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-        proxy_set_header X-Forwarded-Proto $scheme;
-        proxy_redirect off;
-    }
-}
-EOF
-$STD rm -f /etc/nginx/sites-enabled/default
-$STD ln -sf /etc/nginx/sites-available/wger /etc/nginx/sites-enabled/wger
-systemctl enable -q --now redis-server nginx wger celery celery-beat
-systemctl restart nginx
-msg_ok "Created Config and Services"
 
 motd_ssh
 customize

misc/build.func

@@ -3318,68 +3318,6 @@ configure_ssh_settings() {
   fi
 }
 
-# ------------------------------------------------------------------------------
-# msg_menu()
-#
-# - Displays a numbered menu for update_script() functions
-# - In silent mode (PHS_SILENT=1): auto-selects the default option
-# - In interactive mode: shows menu via read with 10s timeout + default fallback
-# - Usage: CHOICE=$(msg_menu "Title" "tag1" "Description 1" "tag2" "Desc 2" ...)
-# - The first item is always the default
-# - Returns the selected tag to stdout
-# - If no valid selection or timeout, returns the default (first) tag
-# ------------------------------------------------------------------------------
-msg_menu() {
-  local title="$1"
-  shift
-
-  # Parse items into parallel arrays: tags[] and descriptions[]
-  local -a tags=()
-  local -a descs=()
-  while [[ $# -ge 2 ]]; do
-    tags+=("$1")
-    descs+=("$2")
-    shift 2
-  done
-
-  local default_tag="${tags[0]}"
-  local count=${#tags[@]}
-
-  # Silent mode: return default immediately
-  if [[ -n "${PHS_SILENT+x}" ]] && [[ "${PHS_SILENT}" == "1" ]]; then
-    echo "$default_tag"
-    return 0
-  fi
-
-  # Display menu
-  echo ""
-  msg_custom "📋" "${BL}" "${title}"
-  echo ""
-  for i in "${!tags[@]}"; do
-    local marker="  "
-    [[ $i -eq 0 ]] && marker="* "
-    printf "${TAB3}${marker}%s) %s\n" "${tags[$i]}" "${descs[$i]}"
-  done
-  echo ""
-
-  local selection=""
-  read -r -t 10 -p "${TAB3}Select [default=${default_tag}, timeout 10s]: " selection || true
-
-  # Validate selection
-  if [[ -n "$selection" ]]; then
-    for tag in "${tags[@]}"; do
-      if [[ "$selection" == "$tag" ]]; then
-        echo "$selection"
-        return 0
-      fi
-    done
-    msg_warn "Invalid selection '${selection}' - using default: ${default_tag}"
-  fi
-
-  echo "$default_tag"
-  return 0
-}
-
 # ------------------------------------------------------------------------------
 # start()
 #

misc/tools.func

@@ -3595,7 +3595,6 @@ _setup_intel_arc() {
     $STD apt -y install \
       intel-media-va-driver-non-free \
       intel-opencl-icd \
-      libmfx-gen1.2 \
       vainfo \
       intel-gpu-tools 2>/dev/null || msg_warn "Some Intel Arc packages failed"
 
@@ -3622,7 +3621,6 @@ _setup_intel_arc() {
       intel-media-va-driver-non-free \
       ocl-icd-libopencl1 \
       libvpl2 \
-      libmfx-gen1.2 \
       vainfo \
       intel-gpu-tools 2>/dev/null || msg_warn "Some Intel Arc packages failed"
   fi

tools/addon/add-netbird-lxc.sh

@@ -79,24 +79,11 @@ EOF
 header_info
 msg "Installing NetBird..."
 pct exec "$CTID" -- bash -c '
-if ! command -v curl &>/dev/null; then
-  apt-get update -qq
-  apt-get install -y curl >/dev/null
-fi
 apt install -y ca-certificates gpg &>/dev/null
 curl -fsSL "https://pkgs.netbird.io/debian/public.key" | gpg --dearmor >/usr/share/keyrings/netbird-archive-keyring.gpg
 echo "deb [signed-by=/usr/share/keyrings/netbird-archive-keyring.gpg] https://pkgs.netbird.io/debian stable main" >/etc/apt/sources.list.d/netbird.list
 apt-get update &>/dev/null
 apt-get install -y netbird-ui &>/dev/null
-if systemctl list-unit-files docker.service &>/dev/null; then
-  mkdir -p /etc/systemd/system/netbird.service.d
-  cat <<OVERRIDE >/etc/systemd/system/netbird.service.d/after-docker.conf
-[Unit]
-After=docker.service
-Wants=docker.service
-OVERRIDE
-  systemctl daemon-reload
-fi
 '
 msg "\e[1;32m ✔ Installed NetBird.\e[0m"
 sleep 2

tools/addon/add-tailscale-lxc.sh

@@ -89,12 +89,6 @@ if ! dig +short pkgs.tailscale.com | grep -qvE "^127\.|^0\.0\.0\.0$"; then
   echo "nameserver 1.1.1.1" >"$ORIG_RESOLV"
 fi
 
-if ! command -v curl &>/dev/null; then
-  echo "[INFO] curl not found, installing..."
-  apt-get update -qq
-  apt-get install -y curl >/dev/null
-fi
-
 curl -fsSL https://pkgs.tailscale.com/stable/${ID}/${VER}.noarmor.gpg \
   | tee /usr/share/keyrings/tailscale-archive-keyring.gpg >/dev/null
 

tools/addon/adguardhome-sync.sh

@@ -5,11 +5,6 @@
 # License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 # Source: https://github.com/bakito/adguardhome-sync
 
-if ! command -v curl &>/dev/null; then
-  printf "\r\e[2K%b" '\033[93m Setup Source \033[m' >&2
-  apt-get update >/dev/null 2>&1
-  apt-get install -y curl >/dev/null 2>&1
-fi
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/core.func)
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/tools.func)
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/error_handler.func)

tools/addon/copyparty.sh

@@ -5,11 +5,6 @@
 # License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 # Source: https://github.com/9001/copyparty
 
-if ! command -v curl &>/dev/null; then
-  printf "\r\e[2K%b" '\033[93m Setup Source \033[m' >&2
-  apt-get update >/dev/null 2>&1
-  apt-get install -y curl >/dev/null 2>&1
-fi
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/core.func)
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/tools.func)
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/error_handler.func)

tools/addon/filebrowser-quantum.sh

@@ -110,7 +110,6 @@ if [[ -f "$INSTALL_PATH" ]]; then
   read -r update_prompt
   if [[ "${update_prompt,,}" =~ ^(y|yes)$ ]]; then
     msg_info "Updating ${APP}"
-    if ! command -v curl &>/dev/null; then $PKG_MANAGER curl &>/dev/null; fi
     curl -fsSL https://github.com/gtsteffaniak/filebrowser/releases/latest/download/linux-amd64-filebrowser -o "$TMP_BIN"
     chmod +x "$TMP_BIN"
     mv -f "$TMP_BIN" /usr/local/bin/filebrowser

tools/addon/filebrowser.sh

@@ -88,7 +88,6 @@ if [ -f "$INSTALL_PATH" ]; then
     read -r -p "Would you like to update ${APP}? (y/N): " update_prompt
     if [[ "${update_prompt,,}" =~ ^(y|yes)$ ]]; then
         msg_info "Updating ${APP}"
-        if ! command -v curl &>/dev/null; then $PKG_MANAGER curl &>/dev/null; fi
         curl -fsSL "https://github.com/filebrowser/filebrowser/releases/latest/download/linux-amd64-filebrowser.tar.gz" | tar -xzv -C /usr/local/bin &>/dev/null
         chmod +x "$INSTALL_PATH"
         msg_ok "Updated ${APP}"

tools/addon/glances.sh

@@ -44,7 +44,7 @@ IP=$(get_lxc_ip)
 install_glances_debian() {
   msg_info "Installing dependencies"
   apt-get update >/dev/null 2>&1
-  apt-get install -y gcc lm-sensors wireless-tools curl >/dev/null 2>&1
+  apt-get install -y gcc lm-sensors wireless-tools >/dev/null 2>&1
   msg_ok "Installed dependencies"
 
   msg_info "Setting up Python + uv"
@@ -114,7 +114,7 @@ install_glances_alpine() {
   apk update >/dev/null 2>&1
   $STD apk add --no-cache \
     gcc musl-dev linux-headers python3-dev \
-    python3 py3-pip py3-virtualenv lm-sensors wireless-tools curl >/dev/null 2>&1
+    python3 py3-pip py3-virtualenv lm-sensors wireless-tools >/dev/null 2>&1
   msg_ok "Installed dependencies"
 
   msg_info "Setting up Python + uv"

tools/addon/immich-public-proxy.sh

@@ -5,11 +5,6 @@
 # License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 # Source: https://github.com/alangrainger/immich-public-proxy
 
-if ! command -v curl &>/dev/null; then
-  printf "\r\e[2K%b" '\033[93m Setup Source \033[m' >&2
-  apt-get update >/dev/null 2>&1
-  apt-get install -y curl >/dev/null 2>&1
-fi
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/core.func)
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/tools.func)
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/error_handler.func)

tools/addon/jellystat.sh

@@ -5,11 +5,6 @@
 # License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 # Source: https://github.com/CyferShepard/Jellystat
 
-if ! command -v curl &>/dev/null; then
-  printf "\r\e[2K%b" '\033[93m Setup Source \033[m' >&2
-  apt-get update >/dev/null 2>&1
-  apt-get install -y curl >/dev/null 2>&1
-fi
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/core.func)
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/tools.func)
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/error_handler.func)

tools/addon/nextcloud-exporter.sh

@@ -5,11 +5,6 @@
 # License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 # Source: https://github.com/xperimental/nextcloud-exporter
 
-if ! command -v curl &>/dev/null; then
-  printf "\r\e[2K%b" '\033[93m Setup Source \033[m' >&2
-  apt-get update >/dev/null 2>&1
-  apt-get install -y curl >/dev/null 2>&1
-fi
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/core.func)
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/tools.func)
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/error_handler.func)

tools/addon/olivetin.sh

@@ -51,10 +51,6 @@ function msg_ok() {
 }
 
 msg_info "Installing ${APP}"
-if ! command -v curl &>/dev/null; then
-  apt-get update >/dev/null 2>&1
-  apt-get install -y curl >/dev/null 2>&1
-fi
 curl -fsSL "https://github.com/OliveTin/OliveTin/releases/latest/download/OliveTin_linux_amd64.deb" -o $(basename "https://github.com/OliveTin/OliveTin/releases/latest/download/OliveTin_linux_amd64.deb")
 dpkg -i OliveTin_linux_amd64.deb &>/dev/null
 systemctl enable --now OliveTin &>/dev/null

tools/addon/phpmyadmin.sh

@@ -57,10 +57,6 @@ function msg_ok() { echo -e "${CM} ${GN}${1}${CL}"; }
 function msg_error() { echo -e "${CROSS} ${RD}${1}${CL}"; }
 
 function check_internet() {
-  if ! command -v curl &>/dev/null; then
-    apt-get update >/dev/null 2>&1
-    apt-get install -y curl >/dev/null 2>&1
-  fi
   msg_info "Checking Internet connectivity to GitHub"
   HTTP_CODE=$(curl -s -o /dev/null -w "%{http_code}" https://github.com)
   if [[ "$HTTP_CODE" -ge 200 && "$HTTP_CODE" -lt 400 ]]; then

tools/addon/pihole-exporter.sh

@@ -5,11 +5,6 @@
 # License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 # Source: https://github.com/eko/pihole-exporter/
 
-if ! command -v curl &>/dev/null; then
-  printf "\r\e[2K%b" '\033[93m Setup Source \033[m' >&2
-  apt-get update >/dev/null 2>&1
-  apt-get install -y curl >/dev/null 2>&1
-fi
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/core.func)
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/tools.func)
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/error_handler.func)

tools/addon/qbittorrent-exporter.sh

@@ -5,11 +5,6 @@
 # License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 # Source: https://github.com/martabal/qbittorrent-exporter
 
-if ! command -v curl &>/dev/null; then
-  printf "\r\e[2K%b" '\033[93m Setup Source \033[m' >&2
-  apt-get update >/dev/null 2>&1
-  apt-get install -y curl >/dev/null 2>&1
-fi
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/core.func)
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/tools.func)
 source <(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/misc/error_handler.func)

tools/addon/webmin.sh

@@ -42,7 +42,7 @@ whiptail --backtitle "Proxmox VE Helper Scripts" --title "Webmin Installer" --ye
 
 msg_info "Installing Prerequisites"
 apt update &>/dev/null
-apt-get -y install libnet-ssleay-perl libauthen-pam-perl libio-pty-perl unzip shared-mime-info curl &>/dev/null
+apt-get -y install libnet-ssleay-perl libauthen-pam-perl libio-pty-perl unzip shared-mime-info &>/dev/null
 msg_ok "Installed Prerequisites"
 
 LATEST=$(curl -fsSL https://api.github.com/repos/webmin/webmin/releases/latest | grep '"tag_name":' | cut -d'"' -f4)

tools/pve/update-apps.sh

@@ -421,8 +421,6 @@ for container in $CHOICE; do
 
   if [ $exit_code -eq 0 ]; then
     msg_ok "Updated container $container"
-  elif [ $exit_code -eq 75 ]; then
-    echo -e "${YW}[WARN]${CL} Container $container skipped (requires interactive mode)"
   elif [ "$BACKUP_CHOICE" == "yes" ]; then
     msg_info "Restoring LXC from backup"
     pct stop $container